mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
443e752d97
32 bit handles. The RIO (reduced interrupt operation) and fast posting for the parallel SCSI cards were all 16 bit handles. Furthermore, target mode parallel SCSI only can have 16 bit handles. Use part of a supplied patch to switch over to using 32 bit handles. Be a bit more conservative here and only do this for parallel SCSI for the 12160 (Ultra3) cards. There were a lot of marginal Ultra2 cards, and, frankly, few are findable now for testing. Fix the target handle routine to only do 16 bit handles for parallel SCSI cards. This is okay because the upper sixteen bits of the new 32 bit handles is a sequence number to help protect against duplicate completions. This would be very unlikely to happen with parallel SCSI target mode, and wasn't present before, so we're no worse off than we used to be. While we're at it, finally split the async mailbox completion handlers into FC and parallel SCSI functions. This makes it much cleaner and easier to figure out what is or isn't a legal async mailbox completion code for different card classes. PR: kern/144250 Submitted partially by: Charles D MFC after: 1 week
1875 lines
54 KiB
C
1875 lines
54 KiB
C
/*-
|
|
* Copyright (c) 1997-2009 by Matthew Jacob
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
/*
|
|
* Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters.
|
|
*/
|
|
/*
|
|
* Bug fixes gratefully acknowledged from:
|
|
* Oded Kedem <oded@kashya.com>
|
|
*/
|
|
/*
|
|
* Include header file appropriate for platform we're building on.
|
|
*/
|
|
|
|
#ifdef __NetBSD__
|
|
#include <dev/ic/isp_netbsd.h>
|
|
#endif
|
|
#ifdef __FreeBSD__
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
#include <dev/isp/isp_freebsd.h>
|
|
#endif
|
|
#ifdef __OpenBSD__
|
|
#include <dev/ic/isp_openbsd.h>
|
|
#endif
|
|
#ifdef __linux__
|
|
#include "isp_linux.h"
|
|
#endif
|
|
|
|
#ifdef ISP_TARGET_MODE
|
|
static const char atiocope[] = "ATIO returned for lun %d because it was in the middle of Bus Device Reset on bus %d";
|
|
static const char atior[] = "ATIO returned on for lun %d on from loopid %d because a Bus Reset occurred on bus %d";
|
|
static const char rqo[] = "%s: Request Queue Overflow";
|
|
|
|
static void isp_got_msg(ispsoftc_t *, in_entry_t *);
|
|
static void isp_got_msg_fc(ispsoftc_t *, in_fcentry_t *);
|
|
static void isp_got_tmf_24xx(ispsoftc_t *, at7_entry_t *);
|
|
static void isp_handle_atio(ispsoftc_t *, at_entry_t *);
|
|
static void isp_handle_atio2(ispsoftc_t *, at2_entry_t *);
|
|
static void isp_handle_ctio(ispsoftc_t *, ct_entry_t *);
|
|
static void isp_handle_ctio2(ispsoftc_t *, ct2_entry_t *);
|
|
static void isp_handle_ctio7(ispsoftc_t *, ct7_entry_t *);
|
|
static void isp_handle_24xx_inotify(ispsoftc_t *, in_fcentry_24xx_t *);
|
|
|
|
/*
|
|
* The Qlogic driver gets an interrupt to look at response queue entries.
|
|
* Some of these are status completions for initiatior mode commands, but
|
|
* if target mode is enabled, we get a whole wad of response queue entries
|
|
* to be handled here.
|
|
*
|
|
* Basically the split into 3 main groups: Lun Enable/Modification responses,
|
|
* SCSI Command processing, and Immediate Notification events.
|
|
*
|
|
* You start by writing a request queue entry to enable target mode (and
|
|
* establish some resource limitations which you can modify later).
|
|
* The f/w responds with a LUN ENABLE or LUN MODIFY response with
|
|
* the status of this action. If the enable was successful, you can expect...
|
|
*
|
|
* Response queue entries with SCSI commands encapsulate show up in an ATIO
|
|
* (Accept Target IO) type- sometimes with enough info to stop the command at
|
|
* this level. Ultimately the driver has to feed back to the f/w's request
|
|
* queue a sequence of CTIOs (continue target I/O) that describe data to
|
|
* be moved and/or status to be sent) and finally finishing with sending
|
|
* to the f/w's response queue an ATIO which then completes the handshake
|
|
* with the f/w for that command. There's a lot of variations on this theme,
|
|
* including flags you can set in the CTIO for the Qlogic 2X00 fibre channel
|
|
* cards that 'auto-replenish' the f/w's ATIO count, but this is the basic
|
|
* gist of it.
|
|
*
|
|
* The third group that can show up in the response queue are Immediate
|
|
* Notification events. These include things like notifications of SCSI bus
|
|
* resets, or Bus Device Reset messages or other messages received. This
|
|
* a classic oddbins area. It can get a little weird because you then turn
|
|
* around and acknowledge the Immediate Notify by writing an entry onto the
|
|
* request queue and then the f/w turns around and gives you an acknowledgement
|
|
* to *your* acknowledgement on the response queue (the idea being to let
|
|
* the f/w tell you when the event is *really* over I guess).
|
|
*
|
|
*/
|
|
|
|
|
|
/*
|
|
* A new response queue entry has arrived. The interrupt service code
|
|
* has already swizzled it into the platform dependent from canonical form.
|
|
*
|
|
* Because of the way this driver is designed, unfortunately most of the
|
|
* actual synchronization work has to be done in the platform specific
|
|
* code- we have no synchroniation primitives in the common code.
|
|
*/
|
|
|
|
int
|
|
isp_target_notify(ispsoftc_t *isp, void *vptr, uint32_t *optrp)
|
|
{
|
|
uint16_t status;
|
|
uint32_t seqid;
|
|
union {
|
|
at_entry_t *atiop;
|
|
at2_entry_t *at2iop;
|
|
at2e_entry_t *at2eiop;
|
|
at7_entry_t *at7iop;
|
|
ct_entry_t *ctiop;
|
|
ct2_entry_t *ct2iop;
|
|
ct2e_entry_t *ct2eiop;
|
|
ct7_entry_t *ct7iop;
|
|
lun_entry_t *lunenp;
|
|
in_entry_t *inotp;
|
|
in_fcentry_t *inot_fcp;
|
|
in_fcentry_e_t *inote_fcp;
|
|
in_fcentry_24xx_t *inot_24xx;
|
|
na_entry_t *nackp;
|
|
na_fcentry_t *nack_fcp;
|
|
na_fcentry_e_t *nacke_fcp;
|
|
na_fcentry_24xx_t *nack_24xx;
|
|
isphdr_t *hp;
|
|
abts_t *abts;
|
|
abts_rsp_t *abts_rsp;
|
|
els_t *els;
|
|
void * *vp;
|
|
#define atiop unp.atiop
|
|
#define at2iop unp.at2iop
|
|
#define at2eiop unp.at2eiop
|
|
#define at7iop unp.at7iop
|
|
#define ctiop unp.ctiop
|
|
#define ct2iop unp.ct2iop
|
|
#define ct2eiop unp.ct2eiop
|
|
#define ct7iop unp.ct7iop
|
|
#define lunenp unp.lunenp
|
|
#define inotp unp.inotp
|
|
#define inot_fcp unp.inot_fcp
|
|
#define inote_fcp unp.inote_fcp
|
|
#define inot_24xx unp.inot_24xx
|
|
#define nackp unp.nackp
|
|
#define nack_fcp unp.nack_fcp
|
|
#define nacke_fcp unp.nacke_fcp
|
|
#define nack_24xx unp.nack_24xx
|
|
#define abts unp.abts
|
|
#define abts_rsp unp.abts_rsp
|
|
#define els unp.els
|
|
#define hdrp unp.hp
|
|
} unp;
|
|
uint8_t local[QENTRY_LEN];
|
|
uint16_t iid;
|
|
int bus, type, level, rval = 1;
|
|
isp_notify_t notify;
|
|
|
|
type = isp_get_response_type(isp, (isphdr_t *)vptr);
|
|
unp.vp = vptr;
|
|
|
|
ISP_TDQE(isp, "isp_target_notify", (int) *optrp, vptr);
|
|
|
|
switch (type) {
|
|
case RQSTYPE_ATIO:
|
|
if (IS_24XX(isp)) {
|
|
int len;
|
|
|
|
isp_get_atio7(isp, at7iop, (at7_entry_t *) local);
|
|
at7iop = (at7_entry_t *) local;
|
|
/*
|
|
* Check for and do something with commands whose
|
|
* IULEN extends past a single queue entry.
|
|
*/
|
|
len = at7iop->at_ta_len & 0xfffff;
|
|
if (len > (QENTRY_LEN - 8)) {
|
|
len -= (QENTRY_LEN - 8);
|
|
isp_prt(isp, ISP_LOGINFO, "long IU length (%d) ignored", len);
|
|
while (len > 0) {
|
|
*optrp = ISP_NXT_QENTRY(*optrp, RESULT_QUEUE_LEN(isp));
|
|
len -= QENTRY_LEN;
|
|
}
|
|
}
|
|
/*
|
|
* Check for a task management function
|
|
*/
|
|
if (at7iop->at_cmnd.fcp_cmnd_task_management) {
|
|
isp_got_tmf_24xx(isp, at7iop);
|
|
break;
|
|
}
|
|
/*
|
|
* Just go straight to outer layer for this one.
|
|
*/
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, local);
|
|
} else {
|
|
isp_get_atio(isp, atiop, (at_entry_t *) local);
|
|
isp_handle_atio(isp, (at_entry_t *) local);
|
|
}
|
|
break;
|
|
|
|
case RQSTYPE_CTIO:
|
|
isp_get_ctio(isp, ctiop, (ct_entry_t *) local);
|
|
isp_handle_ctio(isp, (ct_entry_t *) local);
|
|
break;
|
|
|
|
case RQSTYPE_ATIO2:
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
isp_get_atio2e(isp, at2eiop, (at2e_entry_t *) local);
|
|
} else {
|
|
isp_get_atio2(isp, at2iop, (at2_entry_t *) local);
|
|
}
|
|
isp_handle_atio2(isp, (at2_entry_t *) local);
|
|
break;
|
|
|
|
case RQSTYPE_CTIO3:
|
|
case RQSTYPE_CTIO2:
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
isp_get_ctio2e(isp, ct2eiop, (ct2e_entry_t *) local);
|
|
} else {
|
|
isp_get_ctio2(isp, ct2iop, (ct2_entry_t *) local);
|
|
}
|
|
isp_handle_ctio2(isp, (ct2_entry_t *) local);
|
|
break;
|
|
|
|
case RQSTYPE_CTIO7:
|
|
isp_get_ctio7(isp, ct7iop, (ct7_entry_t *) local);
|
|
isp_handle_ctio7(isp, (ct7_entry_t *) local);
|
|
break;
|
|
|
|
case RQSTYPE_ENABLE_LUN:
|
|
case RQSTYPE_MODIFY_LUN:
|
|
isp_get_enable_lun(isp, lunenp, (lun_entry_t *) local);
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, local);
|
|
break;
|
|
|
|
case RQSTYPE_NOTIFY:
|
|
bus = 0;
|
|
if (IS_24XX(isp)) {
|
|
isp_get_notify_24xx(isp, inot_24xx, (in_fcentry_24xx_t *)local);
|
|
inot_24xx = (in_fcentry_24xx_t *) local;
|
|
isp_handle_24xx_inotify(isp, inot_24xx);
|
|
break;
|
|
}
|
|
if (IS_FC(isp)) {
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
in_fcentry_e_t *ecp = (in_fcentry_e_t *)local;
|
|
isp_get_notify_fc_e(isp, inote_fcp, ecp);
|
|
iid = ecp->in_iid;
|
|
status = ecp->in_status;
|
|
seqid = ecp->in_seqid;
|
|
} else {
|
|
in_fcentry_t *fcp = (in_fcentry_t *)local;
|
|
isp_get_notify_fc(isp, inot_fcp, fcp);
|
|
iid = fcp->in_iid;
|
|
status = fcp->in_status;
|
|
seqid = fcp->in_seqid;
|
|
}
|
|
} else {
|
|
in_entry_t *inp = (in_entry_t *)local;
|
|
isp_get_notify(isp, inotp, inp);
|
|
status = inp->in_status & 0xff;
|
|
seqid = inp->in_seqid;
|
|
iid = inp->in_iid;
|
|
if (IS_DUALBUS(isp)) {
|
|
bus = GET_BUS_VAL(inp->in_iid);
|
|
SET_BUS_VAL(inp->in_iid, 0);
|
|
}
|
|
}
|
|
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "Immediate Notify On Bus %d, status=0x%x seqid=0x%x", bus, status, seqid);
|
|
|
|
switch (status) {
|
|
case IN_MSG_RECEIVED:
|
|
case IN_IDE_RECEIVED:
|
|
if (IS_FC(isp)) {
|
|
isp_got_msg_fc(isp, (in_fcentry_t *)local);
|
|
} else {
|
|
isp_got_msg(isp, (in_entry_t *)local);
|
|
}
|
|
break;
|
|
case IN_RSRC_UNAVAIL:
|
|
isp_prt(isp, ISP_LOGINFO, "Firmware out of ATIOs");
|
|
(void) isp_notify_ack(isp, local);
|
|
break;
|
|
|
|
case IN_RESET:
|
|
ISP_MEMZERO(¬ify, sizeof (isp_notify_t));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
notify.nt_tgt = TGT_ANY;
|
|
notify.nt_nphdl = iid;
|
|
notify.nt_sid = PORT_ANY;
|
|
notify.nt_did = PORT_ANY;
|
|
notify.nt_lun = LUN_ANY;
|
|
notify.nt_tagval = TAG_ANY;
|
|
notify.nt_tagval |= (((uint64_t)(isp->isp_serno++)) << 32);
|
|
notify.nt_ncode = NT_BUS_RESET;
|
|
notify.nt_need_ack = 1;
|
|
notify.nt_lreserved = local;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
|
|
case IN_PORT_LOGOUT:
|
|
ISP_MEMZERO(¬ify, sizeof (isp_notify_t));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
notify.nt_nphdl = iid;
|
|
notify.nt_sid = PORT_ANY;
|
|
notify.nt_did = PORT_ANY;
|
|
notify.nt_ncode = NT_LOGOUT;
|
|
notify.nt_need_ack = 1;
|
|
notify.nt_lreserved = local;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
|
|
case IN_ABORT_TASK:
|
|
ISP_MEMZERO(¬ify, sizeof (isp_notify_t));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
notify.nt_nphdl = iid;
|
|
notify.nt_sid = PORT_ANY;
|
|
notify.nt_did = PORT_ANY;
|
|
notify.nt_ncode = NT_ABORT_TASK;
|
|
notify.nt_need_ack = 1;
|
|
notify.nt_lreserved = local;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
|
|
case IN_GLOBAL_LOGO:
|
|
isp_prt(isp, ISP_LOGTINFO, "%s: all ports logged out", __func__);
|
|
ISP_MEMZERO(¬ify, sizeof (isp_notify_t));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
notify.nt_nphdl = NIL_HANDLE;
|
|
notify.nt_sid = PORT_ANY;
|
|
notify.nt_did = PORT_ANY;
|
|
notify.nt_ncode = NT_GLOBAL_LOGOUT;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
(void) isp_notify_ack(isp, local);
|
|
break;
|
|
|
|
case IN_PORT_CHANGED:
|
|
isp_prt(isp, ISP_LOGTINFO, "%s: port changed", __func__);
|
|
(void) isp_notify_ack(isp, local);
|
|
break;
|
|
|
|
default:
|
|
ISP_SNPRINTF(local, sizeof local, "%s: unknown status to RQSTYPE_NOTIFY (0x%x)", __func__, status);
|
|
isp_print_bytes(isp, local, QENTRY_LEN, vptr);
|
|
(void) isp_notify_ack(isp, local);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case RQSTYPE_NOTIFY_ACK:
|
|
/*
|
|
* The ISP is acknowledging our acknowledgement of an
|
|
* Immediate Notify entry for some asynchronous event.
|
|
*/
|
|
if (IS_24XX(isp)) {
|
|
isp_get_notify_ack_24xx(isp, nack_24xx, (na_fcentry_24xx_t *) local);
|
|
nack_24xx = (na_fcentry_24xx_t *) local;
|
|
if (nack_24xx->na_status != NA_OK) {
|
|
level = ISP_LOGINFO;
|
|
} else {
|
|
level = ISP_LOGTDEBUG1;
|
|
}
|
|
isp_prt(isp, level, "Notify Ack Status=0x%x; Subcode 0x%x seqid=0x%x", nack_24xx->na_status, nack_24xx->na_status_subcode, nack_24xx->na_rxid);
|
|
} else if (IS_FC(isp)) {
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
isp_get_notify_ack_fc_e(isp, nacke_fcp, (na_fcentry_e_t *)local);
|
|
} else {
|
|
isp_get_notify_ack_fc(isp, nack_fcp, (na_fcentry_t *)local);
|
|
}
|
|
nack_fcp = (na_fcentry_t *)local;
|
|
if (nack_fcp->na_status != NA_OK) {
|
|
level = ISP_LOGINFO;
|
|
} else {
|
|
level = ISP_LOGTDEBUG1;
|
|
}
|
|
isp_prt(isp, level, "Notify Ack Status=0x%x seqid 0x%x", nack_fcp->na_status, nack_fcp->na_seqid);
|
|
} else {
|
|
isp_get_notify_ack(isp, nackp, (na_entry_t *)local);
|
|
nackp = (na_entry_t *)local;
|
|
if (nackp->na_status != NA_OK) {
|
|
level = ISP_LOGINFO;
|
|
} else {
|
|
level = ISP_LOGTDEBUG1;
|
|
}
|
|
isp_prt(isp, level, "Notify Ack event 0x%x status=0x%x seqid 0x%x", nackp->na_event, nackp->na_status, nackp->na_seqid);
|
|
}
|
|
break;
|
|
|
|
case RQSTYPE_ABTS_RCVD:
|
|
isp_get_abts(isp, abts, (abts_t *)local);
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, &local);
|
|
break;
|
|
case RQSTYPE_ABTS_RSP:
|
|
isp_get_abts_rsp(isp, abts_rsp, (abts_rsp_t *)local);
|
|
abts_rsp = (abts_rsp_t *) local;
|
|
if (abts_rsp->abts_rsp_status) {
|
|
level = ISP_LOGINFO;
|
|
} else {
|
|
level = ISP_LOGTDEBUG0;
|
|
}
|
|
isp_prt(isp, level, "ABTS RSP response[0x%x]: status=0x%x sub=(0x%x 0x%x)", abts_rsp->abts_rsp_rxid_task, abts_rsp->abts_rsp_status,
|
|
abts_rsp->abts_rsp_payload.rsp.subcode1, abts_rsp->abts_rsp_payload.rsp.subcode2);
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "%s: unknown entry type 0x%x", __func__, type);
|
|
rval = 0;
|
|
break;
|
|
}
|
|
#undef atiop
|
|
#undef at2iop
|
|
#undef at2eiop
|
|
#undef at7iop
|
|
#undef ctiop
|
|
#undef ct2iop
|
|
#undef ct2eiop
|
|
#undef ct7iop
|
|
#undef lunenp
|
|
#undef inotp
|
|
#undef inot_fcp
|
|
#undef inote_fcp
|
|
#undef inot_24xx
|
|
#undef nackp
|
|
#undef nack_fcp
|
|
#undef nacke_fcp
|
|
#undef hack_24xx
|
|
#undef abts
|
|
#undef abts_rsp
|
|
#undef els
|
|
#undef hdrp
|
|
return (rval);
|
|
}
|
|
|
|
|
|
/*
|
|
* Toggle (on/off) target mode for bus/target/lun.
|
|
*
|
|
* The caller has checked for overlap and legality.
|
|
*
|
|
* Note that not all of bus, target or lun can be paid attention to.
|
|
* Note also that this action will not be complete until the f/w writes
|
|
* a response entry. The caller is responsible for synchronizing with this.
|
|
*/
|
|
int
|
|
isp_lun_cmd(ispsoftc_t *isp, int cmd, int bus, int lun, int cmd_cnt, int inot_cnt)
|
|
{
|
|
lun_entry_t el;
|
|
void *outp;
|
|
|
|
ISP_MEMZERO(&el, sizeof (el));
|
|
if (IS_DUALBUS(isp)) {
|
|
el.le_rsvd = (bus & 0x1) << 7;
|
|
}
|
|
el.le_cmd_count = cmd_cnt;
|
|
el.le_in_count = inot_cnt;
|
|
if (cmd == RQSTYPE_ENABLE_LUN) {
|
|
if (IS_SCSI(isp)) {
|
|
el.le_flags = LUN_TQAE|LUN_DISAD;
|
|
el.le_cdb6len = 12;
|
|
el.le_cdb7len = 12;
|
|
}
|
|
} else if (cmd == -RQSTYPE_ENABLE_LUN) {
|
|
cmd = RQSTYPE_ENABLE_LUN;
|
|
el.le_cmd_count = 0;
|
|
el.le_in_count = 0;
|
|
} else if (cmd == -RQSTYPE_MODIFY_LUN) {
|
|
cmd = RQSTYPE_MODIFY_LUN;
|
|
el.le_ops = LUN_CCDECR | LUN_INDECR;
|
|
} else {
|
|
el.le_ops = LUN_CCINCR | LUN_ININCR;
|
|
}
|
|
el.le_header.rqs_entry_type = cmd;
|
|
el.le_header.rqs_entry_count = 1;
|
|
if (IS_SCSI(isp)) {
|
|
el.le_tgt = SDPARAM(isp, bus)->isp_initiator_id;
|
|
el.le_lun = lun;
|
|
} else if (ISP_CAP_SCCFW(isp) == 0) {
|
|
el.le_lun = lun;
|
|
}
|
|
el.le_timeout = 30;
|
|
|
|
outp = isp_getrqentry(isp);
|
|
if (outp == NULL) {
|
|
isp_prt(isp, ISP_LOGERR, rqo, __func__);
|
|
return (-1);
|
|
}
|
|
isp_put_enable_lun(isp, &el, outp);
|
|
ISP_TDQE(isp, "isp_lun_cmd", isp->isp_reqidx, &el);
|
|
ISP_SYNC_REQUEST(isp);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
isp_target_put_entry(ispsoftc_t *isp, void *ap)
|
|
{
|
|
void *outp;
|
|
uint8_t etype = ((isphdr_t *) ap)->rqs_entry_type;
|
|
|
|
outp = isp_getrqentry(isp);
|
|
if (outp == NULL) {
|
|
isp_prt(isp, ISP_LOGWARN, rqo, __func__);
|
|
return (-1);
|
|
}
|
|
switch (etype) {
|
|
case RQSTYPE_ATIO:
|
|
isp_put_atio(isp, (at_entry_t *) ap, (at_entry_t *) outp);
|
|
break;
|
|
case RQSTYPE_ATIO2:
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
isp_put_atio2e(isp, (at2e_entry_t *) ap, (at2e_entry_t *) outp);
|
|
} else {
|
|
isp_put_atio2(isp, (at2_entry_t *) ap, (at2_entry_t *) outp);
|
|
}
|
|
break;
|
|
case RQSTYPE_CTIO:
|
|
isp_put_ctio(isp, (ct_entry_t *) ap, (ct_entry_t *) outp);
|
|
break;
|
|
case RQSTYPE_CTIO2:
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
isp_put_ctio2e(isp, (ct2e_entry_t *) ap, (ct2e_entry_t *) outp);
|
|
} else {
|
|
isp_put_ctio2(isp, (ct2_entry_t *) ap, (ct2_entry_t *) outp);
|
|
}
|
|
break;
|
|
case RQSTYPE_CTIO7:
|
|
isp_put_ctio7(isp, (ct7_entry_t *) ap, (ct7_entry_t *) outp);
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "%s: Unknown type 0x%x", __func__, etype);
|
|
return (-1);
|
|
}
|
|
ISP_TDQE(isp, __func__, isp->isp_reqidx, ap);
|
|
ISP_SYNC_REQUEST(isp);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
isp_target_put_atio(ispsoftc_t *isp, void *arg)
|
|
{
|
|
union {
|
|
at_entry_t _atio;
|
|
at2_entry_t _atio2;
|
|
at2e_entry_t _atio2e;
|
|
} atun;
|
|
|
|
ISP_MEMZERO(&atun, sizeof atun);
|
|
if (IS_FC(isp)) {
|
|
at2_entry_t *aep = arg;
|
|
atun._atio2.at_header.rqs_entry_type = RQSTYPE_ATIO2;
|
|
atun._atio2.at_header.rqs_entry_count = 1;
|
|
if (ISP_CAP_SCCFW(isp)) {
|
|
atun._atio2.at_scclun = aep->at_scclun;
|
|
} else {
|
|
atun._atio2.at_lun = (uint8_t) aep->at_lun;
|
|
}
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
atun._atio2e.at_iid = ((at2e_entry_t *)aep)->at_iid;
|
|
} else {
|
|
atun._atio2.at_iid = aep->at_iid;
|
|
}
|
|
atun._atio2.at_rxid = aep->at_rxid;
|
|
atun._atio2.at_status = CT_OK;
|
|
} else {
|
|
at_entry_t *aep = arg;
|
|
atun._atio.at_header.rqs_entry_type = RQSTYPE_ATIO;
|
|
atun._atio.at_header.rqs_entry_count = 1;
|
|
atun._atio.at_handle = aep->at_handle;
|
|
atun._atio.at_iid = aep->at_iid;
|
|
atun._atio.at_tgt = aep->at_tgt;
|
|
atun._atio.at_lun = aep->at_lun;
|
|
atun._atio.at_tag_type = aep->at_tag_type;
|
|
atun._atio.at_tag_val = aep->at_tag_val;
|
|
atun._atio.at_status = (aep->at_flags & AT_TQAE);
|
|
atun._atio.at_status |= CT_OK;
|
|
}
|
|
return (isp_target_put_entry(isp, &atun));
|
|
}
|
|
|
|
/*
|
|
* Command completion- both for handling cases of no resources or
|
|
* no blackhole driver, or other cases where we have to, inline,
|
|
* finish the command sanely, or for normal command completion.
|
|
*
|
|
* The 'completion' code value has the scsi status byte in the low 8 bits.
|
|
* If status is a CHECK CONDITION and bit 8 is nonzero, then bits 12..15 have
|
|
* the sense key and bits 16..23 have the ASCQ and bits 24..31 have the ASC
|
|
* values.
|
|
*
|
|
* NB: the key, asc, ascq, cannot be used for parallel SCSI as it doesn't
|
|
* NB: inline SCSI sense reporting. As such, we lose this information. XXX.
|
|
*
|
|
* For both parallel && fibre channel, we use the feature that does
|
|
* an automatic resource autoreplenish so we don't have then later do
|
|
* put of an atio to replenish the f/w's resource count.
|
|
*/
|
|
|
|
int
|
|
isp_endcmd(ispsoftc_t *isp, ...)
|
|
{
|
|
uint32_t code, hdl;
|
|
uint8_t sts;
|
|
union {
|
|
ct_entry_t _ctio;
|
|
ct2_entry_t _ctio2;
|
|
ct2e_entry_t _ctio2e;
|
|
ct7_entry_t _ctio7;
|
|
} un;
|
|
va_list ap;
|
|
|
|
ISP_MEMZERO(&un, sizeof un);
|
|
|
|
if (IS_24XX(isp)) {
|
|
int vpidx, nphdl;
|
|
at7_entry_t *aep;
|
|
ct7_entry_t *cto = &un._ctio7;
|
|
|
|
va_start(ap, isp);
|
|
aep = va_arg(ap, at7_entry_t *);
|
|
nphdl = va_arg(ap, int);
|
|
/*
|
|
* Note that vpidx may equal 0xff (unknown) here
|
|
*/
|
|
vpidx = va_arg(ap, int);
|
|
code = va_arg(ap, uint32_t);
|
|
hdl = va_arg(ap, uint32_t);
|
|
va_end(ap);
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: [RX_ID 0x%x] chan %d code %x", __func__, aep->at_rxid, vpidx, code);
|
|
|
|
sts = code & 0xff;
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO7;
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
cto->ct_nphdl = nphdl;
|
|
cto->ct_rxid = aep->at_rxid;
|
|
cto->ct_iid_lo = (aep->at_hdr.s_id[1] << 8) | aep->at_hdr.s_id[2];
|
|
cto->ct_iid_hi = aep->at_hdr.s_id[0];
|
|
cto->ct_oxid = aep->at_hdr.ox_id;
|
|
cto->ct_scsi_status = sts;
|
|
cto->ct_vpidx = vpidx;
|
|
cto->ct_flags = CT7_NOACK;
|
|
if (code & ECMD_TERMINATE) {
|
|
cto->ct_flags |= CT7_TERMINATE;
|
|
} else if (code & ECMD_SVALID) {
|
|
cto->ct_flags |= CT7_FLAG_MODE1 | CT7_SENDSTATUS;
|
|
cto->ct_scsi_status |= (FCP_SNSLEN_VALID << 8);
|
|
cto->rsp.m1.ct_resplen = cto->ct_senselen = min(16, MAXRESPLEN_24XX);
|
|
ISP_MEMZERO(cto->rsp.m1.ct_resp, sizeof (cto->rsp.m1.ct_resp));
|
|
cto->rsp.m1.ct_resp[0] = 0xf0;
|
|
cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf;
|
|
cto->rsp.m1.ct_resp[7] = 8;
|
|
cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff;
|
|
cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff;
|
|
} else {
|
|
cto->ct_flags |= CT7_FLAG_MODE1 | CT7_SENDSTATUS;
|
|
}
|
|
if (aep->at_cmnd.cdb_dl.sf.fcp_cmnd_dl) {
|
|
cto->ct_resid = aep->at_cmnd.cdb_dl.sf.fcp_cmnd_dl;
|
|
if (cto->ct_resid < 0) {
|
|
cto->ct_scsi_status |= (FCP_RESID_OVERFLOW << 8);
|
|
} else if (cto->ct_resid > 0) {
|
|
cto->ct_scsi_status |= (FCP_RESID_UNDERFLOW << 8);
|
|
}
|
|
}
|
|
cto->ct_syshandle = hdl;
|
|
} else if (IS_FC(isp)) {
|
|
at2_entry_t *aep;
|
|
ct2_entry_t *cto = &un._ctio2;
|
|
|
|
va_start(ap, isp);
|
|
aep = va_arg(ap, at2_entry_t *);
|
|
code = va_arg(ap, uint32_t);
|
|
hdl = va_arg(ap, uint32_t);
|
|
va_end(ap);
|
|
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: [RX_ID 0x%x] code %x", __func__, aep->at_rxid, code);
|
|
|
|
sts = code & 0xff;
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
if (ISP_CAP_SCCFW(isp) == 0) {
|
|
cto->ct_lun = aep->at_lun;
|
|
}
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
un._ctio2e.ct_iid = ((at2e_entry_t *)aep)->at_iid;
|
|
} else {
|
|
cto->ct_iid = aep->at_iid;
|
|
}
|
|
cto->ct_rxid = aep->at_rxid;
|
|
cto->rsp.m1.ct_scsi_status = sts;
|
|
cto->ct_flags = CT2_SENDSTATUS | CT2_NO_DATA | CT2_FLAG_MODE1;
|
|
if (hdl == 0) {
|
|
cto->ct_flags |= CT2_CCINCR;
|
|
}
|
|
if (aep->at_datalen) {
|
|
cto->ct_resid = aep->at_datalen;
|
|
cto->rsp.m1.ct_scsi_status |= CT2_DATA_UNDER;
|
|
}
|
|
if (sts == SCSI_CHECK && (code & ECMD_SVALID)) {
|
|
cto->rsp.m1.ct_resp[0] = 0xf0;
|
|
cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf;
|
|
cto->rsp.m1.ct_resp[7] = 8;
|
|
cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff;
|
|
cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff;
|
|
cto->rsp.m1.ct_senselen = 16;
|
|
cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
|
|
}
|
|
cto->ct_syshandle = hdl;
|
|
} else {
|
|
at_entry_t *aep;
|
|
ct_entry_t *cto = &un._ctio;
|
|
|
|
va_start(ap, isp);
|
|
aep = va_arg(ap, at_entry_t *);
|
|
code = va_arg(ap, uint32_t);
|
|
hdl = va_arg(ap, uint32_t);
|
|
va_end(ap);
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: [IID %d] code %x", __func__, aep->at_iid, code);
|
|
sts = code;
|
|
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
cto->ct_fwhandle = aep->at_handle;
|
|
cto->ct_iid = aep->at_iid;
|
|
cto->ct_tgt = aep->at_tgt;
|
|
cto->ct_lun = aep->at_lun;
|
|
cto->ct_tag_type = aep->at_tag_type;
|
|
cto->ct_tag_val = aep->at_tag_val;
|
|
if (aep->at_flags & AT_TQAE) {
|
|
cto->ct_flags |= CT_TQAE;
|
|
}
|
|
cto->ct_flags = CT_SENDSTATUS | CT_NO_DATA;
|
|
if (hdl == 0) {
|
|
cto->ct_flags |= CT_CCINCR;
|
|
}
|
|
cto->ct_scsi_status = sts;
|
|
cto->ct_syshandle = hdl;
|
|
}
|
|
return (isp_target_put_entry(isp, &un));
|
|
}
|
|
|
|
/*
|
|
* These are either broadcast events or specifically CTIO fast completion
|
|
*/
|
|
|
|
int
|
|
isp_target_async(ispsoftc_t *isp, int bus, int event)
|
|
{
|
|
isp_notify_t notify;
|
|
|
|
ISP_MEMZERO(¬ify, sizeof (isp_notify_t));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
notify.nt_nphdl = NIL_HANDLE;
|
|
notify.nt_sid = PORT_ANY;
|
|
notify.nt_did = PORT_ANY;
|
|
notify.nt_tgt = TGT_ANY;
|
|
notify.nt_channel = bus;
|
|
notify.nt_lun = LUN_ANY;
|
|
notify.nt_tagval = TAG_ANY;
|
|
notify.nt_tagval |= (((uint64_t)(isp->isp_serno++)) << 32);
|
|
|
|
switch (event) {
|
|
case ASYNC_LOOP_UP:
|
|
case ASYNC_PTPMODE:
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: LOOP UP", __func__);
|
|
notify.nt_ncode = NT_LINK_UP;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
case ASYNC_LOOP_DOWN:
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: LOOP DOWN", __func__);
|
|
notify.nt_ncode = NT_LINK_DOWN;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
case ASYNC_LIP_ERROR:
|
|
case ASYNC_LIP_F8:
|
|
case ASYNC_LIP_OCCURRED:
|
|
case ASYNC_LOOP_RESET:
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: LIP RESET", __func__);
|
|
notify.nt_ncode = NT_LIP_RESET;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
case ASYNC_BUS_RESET:
|
|
case ASYNC_TIMEOUT_RESET: /* XXX: where does this come from ? */
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: BUS RESET", __func__);
|
|
notify.nt_ncode = NT_BUS_RESET;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
case ASYNC_DEVICE_RESET:
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: DEVICE RESET", __func__);
|
|
notify.nt_ncode = NT_TARGET_RESET;
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
break;
|
|
case ASYNC_CTIO_DONE:
|
|
{
|
|
uint8_t storage[QENTRY_LEN];
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "%s: CTIO DONE", __func__);
|
|
memset(storage, 0, QENTRY_LEN);
|
|
if (IS_24XX(isp)) {
|
|
ct7_entry_t *ct = (ct7_entry_t *) storage;
|
|
ct->ct_header.rqs_entry_type = RQSTYPE_CTIO7;
|
|
ct->ct_nphdl = CT7_OK;
|
|
ct->ct_syshandle = bus;
|
|
ct->ct_flags = CT7_SENDSTATUS;
|
|
} else if (IS_FC(isp)) {
|
|
/* This should also suffice for 2K login code */
|
|
ct2_entry_t *ct = (ct2_entry_t *) storage;
|
|
ct->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
|
|
ct->ct_status = CT_OK;
|
|
ct->ct_syshandle = bus;
|
|
ct->ct_flags = CT2_SENDSTATUS|CT2_FASTPOST;
|
|
} else {
|
|
ct_entry_t *ct = (ct_entry_t *) storage;
|
|
ct->ct_header.rqs_entry_type = RQSTYPE_CTIO;
|
|
ct->ct_status = CT_OK;
|
|
ct->ct_syshandle = bus;
|
|
/* we skip fwhandle here */
|
|
ct->ct_fwhandle = 0;
|
|
ct->ct_flags = CT_SENDSTATUS;
|
|
}
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, storage);
|
|
break;
|
|
}
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "%s: unknown event 0x%x", __func__, event);
|
|
if (isp->isp_state == ISP_RUNSTATE) {
|
|
(void) isp_notify_ack(isp, NULL);
|
|
}
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Process a received message.
|
|
* The ISP firmware can handle most messages, there are only
|
|
* a few that we need to deal with:
|
|
* - abort: clean up the current command
|
|
* - abort tag and clear queue
|
|
*/
|
|
|
|
static void
|
|
isp_got_msg(ispsoftc_t *isp, in_entry_t *inp)
|
|
{
|
|
isp_notify_t notify;
|
|
uint8_t status = inp->in_status & ~QLTM_SVALID;
|
|
|
|
ISP_MEMZERO(¬ify, sizeof (notify));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
notify.nt_nphdl = GET_IID_VAL(inp->in_iid);
|
|
notify.nt_sid = PORT_ANY;
|
|
notify.nt_did = PORT_ANY;
|
|
notify.nt_channel = GET_BUS_VAL(inp->in_iid);
|
|
notify.nt_tgt = inp->in_tgt;
|
|
notify.nt_lun = inp->in_lun;
|
|
IN_MAKE_TAGID(notify.nt_tagval, inp);
|
|
notify.nt_tagval |= (((uint64_t)(isp->isp_serno++)) << 32);
|
|
notify.nt_lreserved = inp;
|
|
|
|
if (status == IN_IDE_RECEIVED || status == IN_MSG_RECEIVED) {
|
|
switch (inp->in_msg[0]) {
|
|
case MSG_ABORT:
|
|
notify.nt_ncode = NT_ABORT_TASK_SET;
|
|
break;
|
|
case MSG_BUS_DEV_RESET:
|
|
notify.nt_ncode = NT_TARGET_RESET;
|
|
break;
|
|
case MSG_ABORT_TAG:
|
|
notify.nt_ncode = NT_ABORT_TASK;
|
|
break;
|
|
case MSG_CLEAR_QUEUE:
|
|
notify.nt_ncode = NT_CLEAR_TASK_SET;
|
|
break;
|
|
case MSG_REL_RECOVERY:
|
|
notify.nt_ncode = NT_CLEAR_ACA;
|
|
break;
|
|
case MSG_TERM_IO_PROC:
|
|
notify.nt_ncode = NT_ABORT_TASK;
|
|
break;
|
|
case MSG_LUN_RESET:
|
|
notify.nt_ncode = NT_LUN_RESET;
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "%s: unhandled message 0x%x", __func__, inp->in_msg[0]);
|
|
(void) isp_notify_ack(isp, inp);
|
|
return;
|
|
}
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
} else {
|
|
isp_prt(isp, ISP_LOGERR, "%s: unknown immediate notify status 0x%x", __func__, inp->in_status);
|
|
(void) isp_notify_ack(isp, inp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Synthesize a message from the task management flags in a FCP_CMND_IU.
|
|
*/
|
|
static void
|
|
isp_got_msg_fc(ispsoftc_t *isp, in_fcentry_t *inp)
|
|
{
|
|
isp_notify_t notify;
|
|
static const char f1[] = "%s from N-port handle 0x%x lun %d seq 0x%x";
|
|
static const char f2[] = "unknown %s 0x%x lun %d N-Port handle 0x%x task flags 0x%x seq 0x%x\n";
|
|
uint16_t seqid, loopid;
|
|
|
|
ISP_MEMZERO(¬ify, sizeof (isp_notify_t));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
notify.nt_nphdl = ((in_fcentry_e_t *)inp)->in_iid;
|
|
loopid = ((in_fcentry_e_t *)inp)->in_iid;
|
|
seqid = ((in_fcentry_e_t *)inp)->in_seqid;
|
|
} else {
|
|
notify.nt_nphdl = inp->in_iid;
|
|
loopid = inp->in_iid;
|
|
seqid = inp->in_seqid;
|
|
}
|
|
notify.nt_sid = PORT_ANY;
|
|
notify.nt_did = PORT_ANY;
|
|
|
|
/* nt_tgt set in outer layers */
|
|
if (ISP_CAP_SCCFW(isp)) {
|
|
notify.nt_lun = inp->in_scclun;
|
|
} else {
|
|
notify.nt_lun = inp->in_lun;
|
|
}
|
|
notify.nt_tagval = seqid;
|
|
notify.nt_tagval |= (((uint64_t)(isp->isp_serno++)) << 32);
|
|
notify.nt_need_ack = 1;
|
|
notify.nt_lreserved = inp;
|
|
|
|
if (inp->in_status != IN_MSG_RECEIVED) {
|
|
isp_prt(isp, ISP_LOGINFO, f2, "immediate notify status", inp->in_status, notify.nt_lun, loopid, inp->in_task_flags, inp->in_seqid);
|
|
(void) isp_notify_ack(isp, inp);
|
|
return;
|
|
}
|
|
|
|
if (inp->in_task_flags & TASK_FLAGS_ABORT_TASK_SET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "ABORT TASK SET", loopid, notify.nt_lun, inp->in_seqid);
|
|
notify.nt_ncode = NT_ABORT_TASK_SET;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_TASK_SET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR TASK SET", loopid, notify.nt_lun, inp->in_seqid);
|
|
notify.nt_ncode = NT_CLEAR_TASK_SET;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_LUN_RESET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "LUN RESET", loopid, notify.nt_lun, inp->in_seqid);
|
|
notify.nt_ncode = NT_LUN_RESET;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_TARGET_RESET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "TARGET RESET", loopid, notify.nt_lun, inp->in_seqid);
|
|
notify.nt_ncode = NT_TARGET_RESET;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_ACA) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR ACA", loopid, notify.nt_lun, inp->in_seqid);
|
|
notify.nt_ncode = NT_CLEAR_ACA;
|
|
} else {
|
|
isp_prt(isp, ISP_LOGWARN, f2, "task flag", inp->in_status, notify.nt_lun, loopid, inp->in_task_flags, inp->in_seqid);
|
|
(void) isp_notify_ack(isp, inp);
|
|
return;
|
|
}
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
}
|
|
|
|
static void
|
|
isp_got_tmf_24xx(ispsoftc_t *isp, at7_entry_t *aep)
|
|
{
|
|
isp_notify_t notify;
|
|
static const char f1[] = "%s from PortID 0x%06x lun %d seq 0x%08x";
|
|
static const char f2[] = "unknown Task Flag 0x%x lun %d PortID 0x%x tag 0x%08x";
|
|
uint16_t chan;
|
|
uint32_t sid, did;
|
|
|
|
ISP_MEMZERO(¬ify, sizeof (isp_notify_t));
|
|
notify.nt_hba = isp;
|
|
notify.nt_wwn = INI_ANY;
|
|
notify.nt_lun = (aep->at_cmnd.fcp_cmnd_lun[0] << 8) | (aep->at_cmnd.fcp_cmnd_lun[1]);
|
|
notify.nt_tagval = aep->at_rxid;
|
|
notify.nt_tagval |= (((uint64_t)(isp->isp_serno++)) << 32);
|
|
notify.nt_lreserved = aep;
|
|
sid = (aep->at_hdr.s_id[0] << 16) | (aep->at_hdr.s_id[1] << 8) | (aep->at_hdr.s_id[2]);
|
|
|
|
/* Channel has to derived from D_ID */
|
|
did = (aep->at_hdr.d_id[0] << 16) | (aep->at_hdr.d_id[1] << 8) | aep->at_hdr.d_id[2];
|
|
for (chan = 0; chan < isp->isp_nchan; chan++) {
|
|
if (FCPARAM(isp, chan)->isp_portid == did) {
|
|
break;
|
|
}
|
|
}
|
|
if (chan == isp->isp_nchan) {
|
|
isp_prt(isp, ISP_LOGWARN, "%s: D_ID 0x%x not found on any channel", __func__, did);
|
|
/* just drop on the floor */
|
|
return;
|
|
}
|
|
notify.nt_nphdl = NIL_HANDLE; /* unknown here */
|
|
notify.nt_sid = sid;
|
|
notify.nt_did = did;
|
|
notify.nt_channel = chan;
|
|
if (aep->at_cmnd.fcp_cmnd_task_management & FCP_CMND_TMF_ABORT_TASK_SET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "ABORT TASK SET", sid, notify.nt_lun, aep->at_rxid);
|
|
notify.nt_ncode = NT_ABORT_TASK_SET;
|
|
} else if (aep->at_cmnd.fcp_cmnd_task_management & FCP_CMND_TMF_CLEAR_TASK_SET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR TASK SET", sid, notify.nt_lun, aep->at_rxid);
|
|
notify.nt_ncode = NT_CLEAR_TASK_SET;
|
|
} else if (aep->at_cmnd.fcp_cmnd_task_management & FCP_CMND_TMF_LUN_RESET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "LUN RESET", sid, notify.nt_lun, aep->at_rxid);
|
|
notify.nt_ncode = NT_LUN_RESET;
|
|
} else if (aep->at_cmnd.fcp_cmnd_task_management & FCP_CMND_TMF_TGT_RESET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "TARGET RESET", sid, notify.nt_lun, aep->at_rxid);
|
|
notify.nt_ncode = NT_TARGET_RESET;
|
|
} else if (aep->at_cmnd.fcp_cmnd_task_management & FCP_CMND_TMF_CLEAR_ACA) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR ACA", sid, notify.nt_lun, aep->at_rxid);
|
|
notify.nt_ncode = NT_CLEAR_ACA;
|
|
} else {
|
|
isp_prt(isp, ISP_LOGWARN, f2, aep->at_cmnd.fcp_cmnd_task_management, notify.nt_lun, sid, aep->at_rxid);
|
|
notify.nt_ncode = NT_UNKNOWN;
|
|
return;
|
|
}
|
|
isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
}
|
|
|
|
int
|
|
isp_notify_ack(ispsoftc_t *isp, void *arg)
|
|
{
|
|
char storage[QENTRY_LEN];
|
|
void *outp;
|
|
|
|
/*
|
|
* This is in case a Task Management Function ends up here.
|
|
*/
|
|
if (IS_24XX(isp) && arg != NULL && (((isphdr_t *)arg)->rqs_entry_type == RQSTYPE_ATIO)) {
|
|
at7_entry_t *aep = arg;
|
|
return (isp_endcmd(isp, aep, NIL_HANDLE, 0, 0, 0));
|
|
}
|
|
|
|
outp = isp_getrqentry(isp);
|
|
if (outp == NULL) {
|
|
isp_prt(isp, ISP_LOGWARN, rqo, __func__);
|
|
return (1);
|
|
}
|
|
|
|
ISP_MEMZERO(storage, QENTRY_LEN);
|
|
|
|
if (IS_24XX(isp)) {
|
|
na_fcentry_24xx_t *na = (na_fcentry_24xx_t *) storage;
|
|
if (arg) {
|
|
in_fcentry_24xx_t *in = arg;
|
|
na->na_nphdl = in->in_nphdl;
|
|
na->na_flags = in->in_flags & IN24XX_FLAG_PUREX_IOCB;
|
|
na->na_status = in->in_status;
|
|
na->na_status_subcode = in->in_status_subcode;
|
|
na->na_rxid = in->in_rxid;
|
|
na->na_oxid = in->in_oxid;
|
|
na->na_vpidx = in->in_vpidx;
|
|
if (in->in_status == IN24XX_SRR_RCVD) {
|
|
na->na_srr_rxid = in->in_srr_rxid;
|
|
na->na_srr_reloff_hi = in->in_srr_reloff_hi;
|
|
na->na_srr_reloff_lo = in->in_srr_reloff_lo;
|
|
na->na_srr_iu = in->in_srr_iu;
|
|
na->na_srr_flags = 1;
|
|
na->na_srr_reject_vunique = 0;
|
|
na->na_srr_reject_explanation = 1;
|
|
na->na_srr_reject_code = 1;
|
|
}
|
|
}
|
|
na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
|
|
na->na_header.rqs_entry_count = 1;
|
|
isp_put_notify_24xx_ack(isp, na, (na_fcentry_24xx_t *)outp);
|
|
} else if (IS_FC(isp)) {
|
|
na_fcentry_t *na = (na_fcentry_t *) storage;
|
|
int iid = 0;
|
|
|
|
if (arg) {
|
|
in_fcentry_t *inp = arg;
|
|
ISP_MEMCPY(storage, arg, sizeof (isphdr_t));
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
((na_fcentry_e_t *)na)->na_iid = ((in_fcentry_e_t *)inp)->in_iid;
|
|
iid = ((na_fcentry_e_t *)na)->na_iid;
|
|
} else {
|
|
na->na_iid = inp->in_iid;
|
|
iid = na->na_iid;
|
|
}
|
|
na->na_task_flags = inp->in_task_flags & TASK_FLAGS_RESERVED_MASK;
|
|
na->na_seqid = inp->in_seqid;
|
|
na->na_flags = NAFC_RCOUNT;
|
|
na->na_status = inp->in_status;
|
|
if (inp->in_status == IN_RESET) {
|
|
na->na_flags |= NAFC_RST_CLRD;
|
|
}
|
|
if (inp->in_status == IN_MSG_RECEIVED) {
|
|
na->na_flags |= NAFC_TVALID;
|
|
na->na_response = 0; /* XXX SUCCEEDED XXX */
|
|
}
|
|
} else {
|
|
na->na_flags = NAFC_RST_CLRD;
|
|
}
|
|
na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
|
|
na->na_header.rqs_entry_count = 1;
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
isp_put_notify_ack_fc_e(isp, (na_fcentry_e_t *) na, (na_fcentry_e_t *)outp);
|
|
} else {
|
|
isp_put_notify_ack_fc(isp, na, (na_fcentry_t *)outp);
|
|
}
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "notify ack loopid %u seqid %x flags %x tflags %x response %x", iid, na->na_seqid,
|
|
na->na_flags, na->na_task_flags, na->na_response);
|
|
} else {
|
|
na_entry_t *na = (na_entry_t *) storage;
|
|
if (arg) {
|
|
in_entry_t *inp = arg;
|
|
ISP_MEMCPY(storage, arg, sizeof (isphdr_t));
|
|
na->na_iid = inp->in_iid;
|
|
na->na_lun = inp->in_lun;
|
|
na->na_tgt = inp->in_tgt;
|
|
na->na_seqid = inp->in_seqid;
|
|
if (inp->in_status == IN_RESET) {
|
|
na->na_event = NA_RST_CLRD;
|
|
}
|
|
} else {
|
|
na->na_event = NA_RST_CLRD;
|
|
}
|
|
na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
|
|
na->na_header.rqs_entry_count = 1;
|
|
isp_put_notify_ack(isp, na, (na_entry_t *)outp);
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "notify ack loopid %u lun %u tgt %u seqid %x event %x", na->na_iid, na->na_lun, na->na_tgt, na->na_seqid, na->na_event);
|
|
}
|
|
ISP_TDQE(isp, "isp_notify_ack", isp->isp_reqidx, storage);
|
|
ISP_SYNC_REQUEST(isp);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
isp_acknak_abts(ispsoftc_t *isp, void *arg, int errno)
|
|
{
|
|
char storage[QENTRY_LEN];
|
|
uint16_t tmpw;
|
|
uint8_t tmpb;
|
|
abts_t *abts = arg;
|
|
abts_rsp_t *rsp = (abts_rsp_t *) storage;
|
|
void *outp;
|
|
|
|
if (!IS_24XX(isp)) {
|
|
isp_prt(isp, ISP_LOGERR, "%s: called for non-24XX card", __func__);
|
|
return (0);
|
|
}
|
|
|
|
if (abts->abts_header.rqs_entry_type != RQSTYPE_ABTS_RCVD) {
|
|
isp_prt(isp, ISP_LOGERR, "%s: called for non-ABTS entry (0x%x)", __func__, abts->abts_header.rqs_entry_type);
|
|
return (0);
|
|
}
|
|
|
|
outp = isp_getrqentry(isp);
|
|
if (outp == NULL) {
|
|
isp_prt(isp, ISP_LOGWARN, rqo, __func__);
|
|
return (1);
|
|
}
|
|
|
|
ISP_MEMCPY(rsp, abts, QENTRY_LEN);
|
|
rsp->abts_rsp_header.rqs_entry_type = RQSTYPE_ABTS_RSP;
|
|
|
|
/*
|
|
* Swap destination and source for response.
|
|
*/
|
|
rsp->abts_rsp_r_ctl = BA_ACC;
|
|
tmpw = rsp->abts_rsp_did_lo;
|
|
tmpb = rsp->abts_rsp_did_hi;
|
|
rsp->abts_rsp_did_lo = rsp->abts_rsp_sid_lo;
|
|
rsp->abts_rsp_did_hi = rsp->abts_rsp_sid_hi;
|
|
rsp->abts_rsp_sid_lo = tmpw;
|
|
rsp->abts_rsp_sid_hi = tmpb;
|
|
|
|
rsp->abts_rsp_f_ctl_hi ^= 0x80; /* invert Exchange Context */
|
|
rsp->abts_rsp_f_ctl_hi &= ~0x7f; /* clear Sequence Initiator and other bits */
|
|
rsp->abts_rsp_f_ctl_hi |= 0x10; /* abort the whole exchange */
|
|
rsp->abts_rsp_f_ctl_hi |= 0x8; /* last data frame of sequence */
|
|
rsp->abts_rsp_f_ctl_hi |= 0x1; /* transfer Sequence Initiative */
|
|
rsp->abts_rsp_f_ctl_lo = 0;
|
|
|
|
if (errno == 0) {
|
|
uint16_t rx_id, ox_id;
|
|
|
|
rx_id = rsp->abts_rsp_rx_id;
|
|
ox_id = rsp->abts_rsp_ox_id;
|
|
ISP_MEMZERO(&rsp->abts_rsp_payload.ba_acc, sizeof (rsp->abts_rsp_payload.ba_acc));
|
|
isp_prt(isp, ISP_LOGTINFO, "[0x%x] ABTS of 0x%x being BA_ACC'd", rsp->abts_rsp_rxid_abts, rsp->abts_rsp_rxid_task);
|
|
rsp->abts_rsp_payload.ba_acc.aborted_rx_id = rx_id;
|
|
rsp->abts_rsp_payload.ba_acc.aborted_ox_id = ox_id;
|
|
rsp->abts_rsp_payload.ba_acc.high_seq_cnt = 0xffff;
|
|
} else {
|
|
ISP_MEMZERO(&rsp->abts_rsp_payload.ba_rjt, sizeof (rsp->abts_rsp_payload.ba_acc));
|
|
switch (errno) {
|
|
case ENOMEM:
|
|
rsp->abts_rsp_payload.ba_rjt.reason = 5; /* Logical Busy */
|
|
break;
|
|
default:
|
|
rsp->abts_rsp_payload.ba_rjt.reason = 9; /* Unable to perform command request */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The caller will have set response values as appropriate
|
|
* in the ABTS structure just before calling us.
|
|
*/
|
|
isp_put_abts_rsp(isp, rsp, (abts_rsp_t *)outp);
|
|
ISP_TDQE(isp, "isp_acknak_abts", isp->isp_reqidx, storage);
|
|
ISP_SYNC_REQUEST(isp);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
isp_handle_atio(ispsoftc_t *isp, at_entry_t *aep)
|
|
{
|
|
int lun;
|
|
lun = aep->at_lun;
|
|
/*
|
|
* The firmware status (except for the QLTM_SVALID bit) indicates
|
|
* why this ATIO was sent to us.
|
|
*
|
|
* If QLTM_SVALID is set, the firware has recommended Sense Data.
|
|
*
|
|
* If the DISCONNECTS DISABLED bit is set in the flags field,
|
|
* we're still connected on the SCSI bus - i.e. the initiator
|
|
* did not set DiscPriv in the identify message. We don't care
|
|
* about this so it's ignored.
|
|
*/
|
|
|
|
switch (aep->at_status & ~QLTM_SVALID) {
|
|
case AT_PATH_INVALID:
|
|
/*
|
|
* ATIO rejected by the firmware due to disabled lun.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "rejected ATIO for disabled lun %d", lun);
|
|
break;
|
|
case AT_NOCAP:
|
|
/*
|
|
* Requested Capability not available
|
|
* We sent an ATIO that overflowed the firmware's
|
|
* command resource count.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "rejected ATIO for lun %d because of command count overflow", lun);
|
|
break;
|
|
|
|
case AT_BDR_MSG:
|
|
/*
|
|
* If we send an ATIO to the firmware to increment
|
|
* its command resource count, and the firmware is
|
|
* recovering from a Bus Device Reset, it returns
|
|
* the ATIO with this status. We set the command
|
|
* resource count in the Enable Lun entry and do
|
|
* not increment it. Therefore we should never get
|
|
* this status here.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, atiocope, lun, GET_BUS_VAL(aep->at_iid));
|
|
break;
|
|
|
|
case AT_CDB: /* Got a CDB */
|
|
case AT_PHASE_ERROR: /* Bus Phase Sequence Error */
|
|
/*
|
|
* Punt to platform specific layer.
|
|
*/
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
|
|
break;
|
|
|
|
case AT_RESET:
|
|
/*
|
|
* A bus reset came along and blew away this command. Why
|
|
* they do this in addition the async event code stuff,
|
|
* I dunno.
|
|
*
|
|
* Ignore it because the async event will clear things
|
|
* up for us.
|
|
*/
|
|
isp_prt(isp, ISP_LOGWARN, atior, lun, GET_IID_VAL(aep->at_iid), GET_BUS_VAL(aep->at_iid));
|
|
break;
|
|
|
|
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "Unknown ATIO status 0x%x from loopid %d for lun %d", aep->at_status, aep->at_iid, lun);
|
|
(void) isp_target_put_atio(isp, aep);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_atio2(ispsoftc_t *isp, at2_entry_t *aep)
|
|
{
|
|
int lun, iid;
|
|
|
|
if (ISP_CAP_SCCFW(isp)) {
|
|
lun = aep->at_scclun;
|
|
} else {
|
|
lun = aep->at_lun;
|
|
}
|
|
|
|
if (ISP_CAP_2KLOGIN(isp)) {
|
|
iid = ((at2e_entry_t *)aep)->at_iid;
|
|
} else {
|
|
iid = aep->at_iid;
|
|
}
|
|
|
|
/*
|
|
* The firmware status (except for the QLTM_SVALID bit) indicates
|
|
* why this ATIO was sent to us.
|
|
*
|
|
* If QLTM_SVALID is set, the firware has recommended Sense Data.
|
|
*
|
|
* If the DISCONNECTS DISABLED bit is set in the flags field,
|
|
* we're still connected on the SCSI bus - i.e. the initiator
|
|
* did not set DiscPriv in the identify message. We don't care
|
|
* about this so it's ignored.
|
|
*/
|
|
|
|
switch (aep->at_status & ~QLTM_SVALID) {
|
|
case AT_PATH_INVALID:
|
|
/*
|
|
* ATIO rejected by the firmware due to disabled lun.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "rejected ATIO2 for disabled lun %d", lun);
|
|
break;
|
|
case AT_NOCAP:
|
|
/*
|
|
* Requested Capability not available
|
|
* We sent an ATIO that overflowed the firmware's
|
|
* command resource count.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "rejected ATIO2 for lun %d- command count overflow", lun);
|
|
break;
|
|
|
|
case AT_BDR_MSG:
|
|
/*
|
|
* If we send an ATIO to the firmware to increment
|
|
* its command resource count, and the firmware is
|
|
* recovering from a Bus Device Reset, it returns
|
|
* the ATIO with this status. We set the command
|
|
* resource count in the Enable Lun entry and no
|
|
* not increment it. Therefore we should never get
|
|
* this status here.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, atiocope, lun, 0);
|
|
break;
|
|
|
|
case AT_CDB: /* Got a CDB */
|
|
/*
|
|
* Punt to platform specific layer.
|
|
*/
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
|
|
break;
|
|
|
|
case AT_RESET:
|
|
/*
|
|
* A bus reset came along an blew away this command. Why
|
|
* they do this in addition the async event code stuff,
|
|
* I dunno.
|
|
*
|
|
* Ignore it because the async event will clear things
|
|
* up for us.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, atior, lun, iid, 0);
|
|
break;
|
|
|
|
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "Unknown ATIO2 status 0x%x from loopid %d for lun %d", aep->at_status, iid, lun);
|
|
(void) isp_target_put_atio(isp, aep);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_ctio(ispsoftc_t *isp, ct_entry_t *ct)
|
|
{
|
|
void *xs;
|
|
int pl = ISP_LOGTDEBUG2;
|
|
char *fmsg = NULL;
|
|
|
|
if (ct->ct_syshandle) {
|
|
xs = isp_find_xs_tgt(isp, ct->ct_syshandle);
|
|
if (xs == NULL) {
|
|
pl = ISP_LOGALL;
|
|
}
|
|
} else {
|
|
xs = NULL;
|
|
}
|
|
|
|
switch (ct->ct_status & ~QLTM_SVALID) {
|
|
case CT_OK:
|
|
/*
|
|
* There are generally 3 possibilities as to why we'd get
|
|
* this condition:
|
|
* We disconnected after receiving a CDB.
|
|
* We sent or received data.
|
|
* We sent status & command complete.
|
|
*/
|
|
|
|
if (ct->ct_flags & CT_SENDSTATUS) {
|
|
break;
|
|
} else if ((ct->ct_flags & CT_DATAMASK) == CT_NO_DATA) {
|
|
/*
|
|
* Nothing to do in this case.
|
|
*/
|
|
isp_prt(isp, pl, "CTIO- iid %d disconnected OK", ct->ct_iid);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case CT_BDR_MSG:
|
|
/*
|
|
* Bus Device Reset message received or the SCSI Bus has
|
|
* been Reset; the firmware has gone to Bus Free.
|
|
*
|
|
* The firmware generates an async mailbox interrupt to
|
|
* notify us of this and returns outstanding CTIOs with this
|
|
* status. These CTIOs are handled in that same way as
|
|
* CT_ABORTED ones, so just fall through here.
|
|
*/
|
|
fmsg = "Bus Device Reset";
|
|
/*FALLTHROUGH*/
|
|
case CT_RESET:
|
|
if (fmsg == NULL)
|
|
fmsg = "Bus Reset";
|
|
/*FALLTHROUGH*/
|
|
case CT_ABORTED:
|
|
/*
|
|
* When an Abort message is received the firmware goes to
|
|
* Bus Free and returns all outstanding CTIOs with the status
|
|
* set, then sends us an Immediate Notify entry.
|
|
*/
|
|
if (fmsg == NULL)
|
|
fmsg = "ABORT TAG message sent by Initiator";
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "CTIO destroyed by %s", fmsg);
|
|
break;
|
|
|
|
case CT_INVAL:
|
|
/*
|
|
* CTIO rejected by the firmware due to disabled lun.
|
|
* "Cannot Happen".
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "Firmware rejected CTIO for disabled lun %d", ct->ct_lun);
|
|
break;
|
|
|
|
case CT_NOPATH:
|
|
/*
|
|
* CTIO rejected by the firmware due "no path for the
|
|
* nondisconnecting nexus specified". This means that
|
|
* we tried to access the bus while a non-disconnecting
|
|
* command is in process.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "Firmware rejected CTIO for bad nexus %d/%d/%d", ct->ct_iid, ct->ct_tgt, ct->ct_lun);
|
|
break;
|
|
|
|
case CT_RSELTMO:
|
|
fmsg = "Reselection";
|
|
/*FALLTHROUGH*/
|
|
case CT_TIMEOUT:
|
|
if (fmsg == NULL)
|
|
fmsg = "Command";
|
|
isp_prt(isp, ISP_LOGWARN, "Firmware timed out on %s", fmsg);
|
|
break;
|
|
|
|
case CT_PANIC:
|
|
if (fmsg == NULL)
|
|
fmsg = "Unrecoverable Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_ERR:
|
|
if (fmsg == NULL)
|
|
fmsg = "Completed with Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_PHASE_ERROR:
|
|
if (fmsg == NULL)
|
|
fmsg = "Phase Sequence Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_TERMINATED:
|
|
if (fmsg == NULL)
|
|
fmsg = "terminated by TERMINATE TRANSFER";
|
|
/*FALLTHROUGH*/
|
|
case CT_NOACK:
|
|
if (fmsg == NULL)
|
|
fmsg = "unacknowledged Immediate Notify pending";
|
|
isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg);
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "Unknown CTIO status 0x%x", ct->ct_status & ~QLTM_SVALID);
|
|
break;
|
|
}
|
|
|
|
if (xs == NULL) {
|
|
/*
|
|
* There may be more than one CTIO for a data transfer,
|
|
* or this may be a status CTIO we're not monitoring.
|
|
*
|
|
* The assumption is that they'll all be returned in the
|
|
* order we got them.
|
|
*/
|
|
if (ct->ct_syshandle == 0) {
|
|
if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
|
|
isp_prt(isp, pl, "intermediate CTIO completed ok");
|
|
} else {
|
|
isp_prt(isp, pl, "unmonitored CTIO completed ok");
|
|
}
|
|
} else {
|
|
isp_prt(isp, pl, "NO xs for CTIO (handle 0x%x) status 0x%x", ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
|
|
}
|
|
} else {
|
|
/*
|
|
* Final CTIO completed. Release DMA resources and
|
|
* notify platform dependent layers.
|
|
*/
|
|
if ((ct->ct_flags & CT_DATAMASK) != CT_NO_DATA) {
|
|
ISP_DMAFREE(isp, xs, ct->ct_syshandle);
|
|
}
|
|
isp_prt(isp, pl, "final CTIO complete");
|
|
/*
|
|
* The platform layer will destroy the handle if appropriate.
|
|
*/
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_ctio2(ispsoftc_t *isp, ct2_entry_t *ct)
|
|
{
|
|
void *xs;
|
|
int pl = ISP_LOGTDEBUG2;
|
|
char *fmsg = NULL;
|
|
|
|
if (ct->ct_syshandle) {
|
|
xs = isp_find_xs_tgt(isp, ct->ct_syshandle);
|
|
if (xs == NULL) {
|
|
pl = ISP_LOGALL;
|
|
}
|
|
} else {
|
|
xs = NULL;
|
|
}
|
|
|
|
switch (ct->ct_status & ~QLTM_SVALID) {
|
|
case CT_BUS_ERROR:
|
|
isp_prt(isp, ISP_LOGERR, "PCI DMA Bus Error");
|
|
/* FALL Through */
|
|
case CT_DATA_OVER:
|
|
case CT_DATA_UNDER:
|
|
case CT_OK:
|
|
/*
|
|
* There are generally 2 possibilities as to why we'd get
|
|
* this condition:
|
|
* We sent or received data.
|
|
* We sent status & command complete.
|
|
*/
|
|
|
|
break;
|
|
|
|
case CT_BDR_MSG:
|
|
/*
|
|
* Target Reset function received.
|
|
*
|
|
* The firmware generates an async mailbox interrupt to
|
|
* notify us of this and returns outstanding CTIOs with this
|
|
* status. These CTIOs are handled in that same way as
|
|
* CT_ABORTED ones, so just fall through here.
|
|
*/
|
|
fmsg = "TARGET RESET";
|
|
/*FALLTHROUGH*/
|
|
case CT_RESET:
|
|
if (fmsg == NULL)
|
|
fmsg = "LIP Reset";
|
|
/*FALLTHROUGH*/
|
|
case CT_ABORTED:
|
|
/*
|
|
* When an Abort message is received the firmware goes to
|
|
* Bus Free and returns all outstanding CTIOs with the status
|
|
* set, then sends us an Immediate Notify entry.
|
|
*/
|
|
if (fmsg == NULL) {
|
|
fmsg = "ABORT";
|
|
}
|
|
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "CTIO2 destroyed by %s: RX_ID=0x%x", fmsg, ct->ct_rxid);
|
|
break;
|
|
|
|
case CT_INVAL:
|
|
/*
|
|
* CTIO rejected by the firmware - invalid data direction.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "CTIO2 had wrong data direction");
|
|
break;
|
|
|
|
case CT_RSELTMO:
|
|
fmsg = "failure to reconnect to initiator";
|
|
/*FALLTHROUGH*/
|
|
case CT_TIMEOUT:
|
|
if (fmsg == NULL)
|
|
fmsg = "command";
|
|
isp_prt(isp, ISP_LOGWARN, "Firmware timed out on %s", fmsg);
|
|
break;
|
|
|
|
case CT_ERR:
|
|
fmsg = "Completed with Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_LOGOUT:
|
|
if (fmsg == NULL)
|
|
fmsg = "Port Logout";
|
|
/*FALLTHROUGH*/
|
|
case CT_PORTUNAVAIL:
|
|
if (fmsg == NULL)
|
|
fmsg = "Port not available";
|
|
/*FALLTHROUGH*/
|
|
case CT_PORTCHANGED:
|
|
if (fmsg == NULL)
|
|
fmsg = "Port Changed";
|
|
/*FALLTHROUGH*/
|
|
case CT_NOACK:
|
|
if (fmsg == NULL)
|
|
fmsg = "unacknowledged Immediate Notify pending";
|
|
isp_prt(isp, ISP_LOGWARN, "CTIO returned by f/w- %s", fmsg);
|
|
break;
|
|
|
|
case CT_INVRXID:
|
|
/*
|
|
* CTIO rejected by the firmware because an invalid RX_ID.
|
|
* Just print a message.
|
|
*/
|
|
isp_prt(isp, ISP_LOGWARN, "CTIO2 completed with Invalid RX_ID 0x%x", ct->ct_rxid);
|
|
break;
|
|
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "Unknown CTIO2 status 0x%x", ct->ct_status & ~QLTM_SVALID);
|
|
break;
|
|
}
|
|
|
|
if (xs == NULL) {
|
|
/*
|
|
* There may be more than one CTIO for a data transfer,
|
|
* or this may be a status CTIO we're not monitoring.
|
|
*
|
|
* The assumption is that they'll all be returned in the
|
|
* order we got them.
|
|
*/
|
|
if (ct->ct_syshandle == 0) {
|
|
if ((ct->ct_flags & CT2_SENDSTATUS) == 0) {
|
|
isp_prt(isp, pl, "intermediate CTIO completed ok");
|
|
} else {
|
|
isp_prt(isp, pl, "unmonitored CTIO completed ok");
|
|
}
|
|
} else {
|
|
isp_prt(isp, pl, "NO xs for CTIO (handle 0x%x) status 0x%x", ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
|
|
}
|
|
} else {
|
|
if ((ct->ct_flags & CT2_DATAMASK) != CT2_NO_DATA) {
|
|
ISP_DMAFREE(isp, xs, ct->ct_syshandle);
|
|
}
|
|
if (ct->ct_flags & CT2_SENDSTATUS) {
|
|
/*
|
|
* Sent status and command complete.
|
|
*
|
|
* We're now really done with this command, so we
|
|
* punt to the platform dependent layers because
|
|
* only there can we do the appropriate command
|
|
* complete thread synchronization.
|
|
*/
|
|
isp_prt(isp, pl, "status CTIO complete");
|
|
} else {
|
|
/*
|
|
* Final CTIO completed. Release DMA resources and
|
|
* notify platform dependent layers.
|
|
*/
|
|
isp_prt(isp, pl, "data CTIO complete");
|
|
}
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
|
|
/*
|
|
* The platform layer will destroy the handle if appropriate.
|
|
*/
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_ctio7(ispsoftc_t *isp, ct7_entry_t *ct)
|
|
{
|
|
void *xs;
|
|
int pl = ISP_LOGTDEBUG2;
|
|
char *fmsg = NULL;
|
|
|
|
if (ct->ct_syshandle) {
|
|
xs = isp_find_xs_tgt(isp, ct->ct_syshandle);
|
|
if (xs == NULL) {
|
|
pl = ISP_LOGALL;
|
|
}
|
|
} else {
|
|
xs = NULL;
|
|
}
|
|
|
|
switch (ct->ct_nphdl) {
|
|
case CT7_BUS_ERROR:
|
|
isp_prt(isp, ISP_LOGERR, "PCI DMA Bus Error");
|
|
/* FALL Through */
|
|
case CT7_DATA_OVER:
|
|
case CT7_DATA_UNDER:
|
|
case CT7_OK:
|
|
/*
|
|
* There are generally 2 possibilities as to why we'd get
|
|
* this condition:
|
|
* We sent or received data.
|
|
* We sent status & command complete.
|
|
*/
|
|
|
|
break;
|
|
|
|
case CT7_RESET:
|
|
if (fmsg == NULL) {
|
|
fmsg = "LIP Reset";
|
|
}
|
|
/*FALLTHROUGH*/
|
|
case CT7_ABORTED:
|
|
/*
|
|
* When an Abort message is received the firmware goes to
|
|
* Bus Free and returns all outstanding CTIOs with the status
|
|
* set, then sends us an Immediate Notify entry.
|
|
*/
|
|
if (fmsg == NULL) {
|
|
fmsg = "ABORT";
|
|
}
|
|
isp_prt(isp, ISP_LOGTDEBUG0, "CTIO7 destroyed by %s: RX_ID=0x%x", fmsg, ct->ct_rxid);
|
|
break;
|
|
|
|
case CT7_TIMEOUT:
|
|
if (fmsg == NULL) {
|
|
fmsg = "command";
|
|
}
|
|
isp_prt(isp, ISP_LOGWARN, "Firmware timed out on %s", fmsg);
|
|
break;
|
|
|
|
case CT7_ERR:
|
|
fmsg = "Completed with Error";
|
|
/*FALLTHROUGH*/
|
|
case CT7_LOGOUT:
|
|
if (fmsg == NULL) {
|
|
fmsg = "Port Logout";
|
|
}
|
|
/*FALLTHROUGH*/
|
|
case CT7_PORTUNAVAIL:
|
|
if (fmsg == NULL) {
|
|
fmsg = "Port not available";
|
|
}
|
|
/*FALLTHROUGH*/
|
|
case CT7_PORTCHANGED:
|
|
if (fmsg == NULL) {
|
|
fmsg = "Port Changed";
|
|
}
|
|
isp_prt(isp, ISP_LOGWARN, "CTIO returned by f/w- %s", fmsg);
|
|
break;
|
|
|
|
case CT7_INVRXID:
|
|
/*
|
|
* CTIO rejected by the firmware because an invalid RX_ID.
|
|
* Just print a message.
|
|
*/
|
|
isp_prt(isp, ISP_LOGWARN, "CTIO7 completed with Invalid RX_ID 0x%x", ct->ct_rxid);
|
|
break;
|
|
|
|
case CT7_REASSY_ERR:
|
|
isp_prt(isp, ISP_LOGWARN, "reassembly error");
|
|
break;
|
|
|
|
case CT7_SRR:
|
|
isp_prt(isp, ISP_LOGWARN, "SRR received");
|
|
break;
|
|
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "Unknown CTIO7 status 0x%x", ct->ct_nphdl);
|
|
break;
|
|
}
|
|
|
|
if (xs == NULL) {
|
|
/*
|
|
* There may be more than one CTIO for a data transfer,
|
|
* or this may be a status CTIO we're not monitoring.
|
|
*
|
|
* The assumption is that they'll all be returned in the
|
|
* order we got them.
|
|
*/
|
|
if (ct->ct_syshandle == 0) {
|
|
if (ct->ct_flags & CT7_TERMINATE) {
|
|
isp_prt(isp, ISP_LOGINFO, "termination of 0x%x complete", ct->ct_rxid);
|
|
} else if ((ct->ct_flags & CT7_SENDSTATUS) == 0) {
|
|
isp_prt(isp, pl, "intermediate CTIO completed ok");
|
|
} else {
|
|
isp_prt(isp, pl, "unmonitored CTIO completed ok");
|
|
}
|
|
} else {
|
|
isp_prt(isp, pl, "NO xs for CTIO (handle 0x%x) status 0x%x", ct->ct_syshandle, ct->ct_nphdl);
|
|
}
|
|
} else {
|
|
if ((ct->ct_flags & CT7_DATAMASK) != CT7_NO_DATA) {
|
|
ISP_DMAFREE(isp, xs, ct->ct_syshandle);
|
|
}
|
|
if (ct->ct_flags & CT7_SENDSTATUS) {
|
|
/*
|
|
* Sent status and command complete.
|
|
*
|
|
* We're now really done with this command, so we
|
|
* punt to the platform dependent layers because
|
|
* only there can we do the appropriate command
|
|
* complete thread synchronization.
|
|
*/
|
|
isp_prt(isp, pl, "status CTIO complete");
|
|
} else {
|
|
/*
|
|
* Final CTIO completed. Release DMA resources and
|
|
* notify platform dependent layers.
|
|
*/
|
|
isp_prt(isp, pl, "data CTIO complete");
|
|
}
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
|
|
/*
|
|
* The platform layer will destroy the handle if appropriate.
|
|
*/
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_24xx_inotify(ispsoftc_t *isp, in_fcentry_24xx_t *inot_24xx)
|
|
{
|
|
uint8_t ochan, chan, lochan, hichan;
|
|
|
|
/*
|
|
* Check to see whether we got a wildcard channel.
|
|
* If so, we have to iterate over all channels.
|
|
*/
|
|
ochan = chan = ISP_GET_VPIDX(isp, inot_24xx->in_vpidx);
|
|
if (chan == 0xff) {
|
|
lochan = 0;
|
|
hichan = isp->isp_nchan;
|
|
} else {
|
|
if (chan >= isp->isp_nchan) {
|
|
char buf[64];
|
|
ISP_SNPRINTF(buf, sizeof buf, "%s: bad channel %d for status 0x%x", __func__, chan, inot_24xx->in_status);
|
|
isp_print_bytes(isp, buf, QENTRY_LEN, inot_24xx);
|
|
(void) isp_notify_ack(isp, inot_24xx);
|
|
return;
|
|
}
|
|
lochan = chan;
|
|
hichan = chan + 1;
|
|
}
|
|
isp_prt(isp, ISP_LOGTDEBUG1, "%s: Immediate Notify Channels %d..%d status=0x%x seqid=0x%x", __func__, lochan, hichan-1, inot_24xx->in_status, inot_24xx->in_rxid);
|
|
for (chan = lochan; chan < hichan; chan++) {
|
|
switch (inot_24xx->in_status) {
|
|
case IN24XX_LIP_RESET:
|
|
case IN24XX_LINK_RESET:
|
|
case IN24XX_PORT_LOGOUT:
|
|
case IN24XX_PORT_CHANGED:
|
|
case IN24XX_LINK_FAILED:
|
|
case IN24XX_SRR_RCVD:
|
|
case IN24XX_ELS_RCVD:
|
|
inot_24xx->in_vpidx = chan;
|
|
isp_async(isp, ISPASYNC_TARGET_ACTION, inot_24xx);
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGINFO, "%s: unhandled status (0x%x) for chan %d", __func__, inot_24xx->in_status, chan);
|
|
(void) isp_notify_ack(isp, inot_24xx);
|
|
break;
|
|
}
|
|
}
|
|
inot_24xx->in_vpidx = ochan;
|
|
}
|
|
#endif
|