mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-14 10:09:48 +00:00
Code Issues Releases Activity
fcf43477b8
freebsd/sys/pci/if_wbreg.h

464 lines
14 KiB
C
Raw Blame History

/*-
* Copyright (c) 1997, 1998
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Winbond register definitions.
*/
#define WB_BUSCTL 0x00 /* bus control */
#define WB_TXSTART 0x04 /* tx start demand */
#define WB_RXSTART 0x08 /* rx start demand */
#define WB_RXADDR 0x0C /* rx descriptor list start addr */
#define WB_TXADDR 0x10 /* tx descriptor list start addr */
#define WB_ISR 0x14 /* interrupt status register */
#define WB_NETCFG 0x18 /* network config register */
#define WB_IMR 0x1C /* interrupt mask */
#define WB_FRAMESDISCARDED 0x20 /* # of discarded frames */
#define WB_SIO 0x24 /* MII and ROM/EEPROM access */
#define WB_BOOTROMADDR 0x28
#define WB_TIMER 0x2C /* general timer */
#define WB_CURRXCTL 0x30 /* current RX descriptor */
#define WB_CURRXBUF 0x34 /* current RX buffer */
#define WB_MAR0 0x38 /* multicast filter 0 */
#define WB_MAR1 0x3C /* multicast filter 1 */
#define WB_NODE0 0x40 /* station address 0 */
#define WB_NODE1 0x44 /* station address 1 */
#define WB_BOOTROMSIZE 0x48 /* boot ROM size */
#define WB_CURTXCTL 0x4C /* current TX descriptor */
#define WB_CURTXBUF 0x50 /* current TX buffer */
/*
* Bus control bits.
*/
#define WB_BUSCTL_RESET 0x00000001
#define WB_BUSCTL_ARBITRATION 0x00000002
#define WB_BUSCTL_SKIPLEN 0x0000007C
#define WB_BUSCTL_BUF_BIGENDIAN 0x00000080
#define WB_BUSCTL_BURSTLEN 0x00003F00
#define WB_BUSCTL_CACHEALIGN 0x0000C000
#define WB_BUSCTL_DES_BIGENDIAN 0x00100000
#define WB_BUSCTL_WAIT 0x00200000
#define WB_BUSCTL_MUSTBEONE 0x00400000
#define WB_SKIPLEN_1LONG 0x00000004
#define WB_SKIPLEN_2LONG 0x00000008
#define WB_SKIPLEN_3LONG 0x00000010
#define WB_SKIPLEN_4LONG 0x00000020
#define WB_SKIPLEN_5LONG 0x00000040
#define WB_CACHEALIGN_NONE 0x00000000
#define WB_CACHEALIGN_8LONG 0x00004000
#define WB_CACHEALIGN_16LONG 0x00008000
#define WB_CACHEALIGN_32LONG 0x0000C000
#define WB_BURSTLEN_USECA 0x00000000
#define WB_BURSTLEN_1LONG 0x00000100
#define WB_BURSTLEN_2LONG 0x00000200
#define WB_BURSTLEN_4LONG 0x00000400
#define WB_BURSTLEN_8LONG 0x00000800
#define WB_BURSTLEN_16LONG 0x00001000
#define WB_BURSTLEN_32LONG 0x00002000
#define WB_BUSCTL_CONFIG (WB_CACHEALIGN_8LONG|WB_SKIPLEN_3LONG| \
WB_BURSTLEN_8LONG)
/*
* Interrupt status bits.
*/
#define WB_ISR_TX_OK 0x00000001
#define WB_ISR_TX_IDLE 0x00000002
#define WB_ISR_TX_NOBUF 0x00000004
#define WB_ISR_RX_EARLY 0x00000008
#define WB_ISR_RX_ERR 0x00000010
#define WB_ISR_TX_UNDERRUN 0x00000020
#define WB_ISR_RX_OK 0x00000040
#define WB_ISR_RX_NOBUF 0x00000080
#define WB_ISR_RX_IDLE 0x00000100
#define WB_ISR_TX_EARLY 0x00000400
#define WB_ISR_TIMER_EXPIRED 0x00000800
#define WB_ISR_BUS_ERR 0x00002000
#define WB_ISR_ABNORMAL 0x00008000
#define WB_ISR_NORMAL 0x00010000
#define WB_ISR_RX_STATE 0x000E0000
#define WB_ISR_TX_STATE 0x00700000
#define WB_ISR_BUSERRTYPE 0x03800000
/*
* The RX_STATE and TX_STATE fields are not described anywhere in the
* Winbond datasheet, however it appears that the Winbond chip is an
* attempt at a DEC 'tulip' clone, hence the ISR register is identical
* to that of the tulip chip and we can steal the bit definitions from
* the tulip documentation.
*/
#define WB_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */
#define WB_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */
#define WB_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */
#define WB_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */
#define WB_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */
#define WB_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */
#define WB_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */
#define WB_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */
#define WB_TXSTATE_RESET 0x00000000 /* 000 - reset */
#define WB_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */
#define WB_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */
#define WB_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */
#define WB_TXSTATE_RSVD 0x00400000 /* 100 - reserved */
#define WB_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */
#define WB_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */
#define WB_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */
/*
* Network config bits.
*/
#define WB_NETCFG_RX_ON 0x00000002
#define WB_NETCFG_RX_ALLPHYS 0x00000008
#define WB_NETCFG_RX_MULTI 0x00000010
#define WB_NETCFG_RX_BROAD 0x00000020
#define WB_NETCFG_RX_RUNT 0x00000040
#define WB_NETCFG_RX_ERR 0x00000080
#define WB_NETCFG_FULLDUPLEX 0x00000200
#define WB_NETCFG_LOOPBACK 0x00000C00
#define WB_NETCFG_TX_ON 0x00002000
#define WB_NETCFG_TX_THRESH 0x001FC000
#define WB_NETCFG_RX_EARLYTHRSH 0x1FE00000
#define WB_NETCFG_100MBPS 0x20000000
#define WB_NETCFG_TX_EARLY_ON 0x40000000
#define WB_NETCFG_RX_EARLY_ON 0x80000000
/*
* The tx threshold can be adjusted in increments of 32 bytes.
*/
#define WB_TXTHRESH(x) ((x >> 5) << 14)
#define WB_TXTHRESH_CHUNK 32
#define WB_TXTHRESH_INIT 0 /*72*/
/*
* Interrupt mask bits.
*/
#define WB_IMR_TX_OK 0x00000001
#define WB_IMR_TX_IDLE 0x00000002
#define WB_IMR_TX_NOBUF 0x00000004
#define WB_IMR_RX_EARLY 0x00000008
#define WB_IMR_RX_ERR 0x00000010
#define WB_IMR_TX_UNDERRUN 0x00000020
#define WB_IMR_RX_OK 0x00000040
#define WB_IMR_RX_NOBUF 0x00000080
#define WB_IMR_RX_IDLE 0x00000100
#define WB_IMR_TX_EARLY 0x00000400
#define WB_IMR_TIMER_EXPIRED 0x00000800
#define WB_IMR_BUS_ERR 0x00002000
#define WB_IMR_ABNORMAL 0x00008000
#define WB_IMR_NORMAL 0x00010000
#define WB_INTRS \
(WB_IMR_RX_OK|WB_IMR_TX_OK|WB_IMR_RX_NOBUF|WB_IMR_RX_ERR| \
WB_IMR_TX_NOBUF|WB_IMR_TX_UNDERRUN|WB_IMR_BUS_ERR| \
WB_IMR_ABNORMAL|WB_IMR_NORMAL|WB_IMR_TX_EARLY)
/*
* Serial I/O (EEPROM/ROM) bits.
*/
#define WB_SIO_EE_CS 0x00000001 /* EEPROM chip select */
#define WB_SIO_EE_CLK 0x00000002 /* EEPROM clock */
#define WB_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */
#define WB_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */
#define WB_SIO_ROMDATA4 0x00000010
#define WB_SIO_ROMDATA5 0x00000020
#define WB_SIO_ROMDATA6 0x00000040
#define WB_SIO_ROMDATA7 0x00000080
#define WB_SIO_ROMCTL_WRITE 0x00000200
#define WB_SIO_ROMCTL_READ 0x00000400
#define WB_SIO_EESEL 0x00000800
#define WB_SIO_MII_CLK 0x00010000 /* MDIO clock */
#define WB_SIO_MII_DATAIN 0x00020000 /* MDIO data out */
#define WB_SIO_MII_DIR 0x00040000 /* MDIO dir */
#define WB_SIO_MII_DATAOUT 0x00080000 /* MDIO data in */
#define WB_EECMD_WRITE 0x140
#define WB_EECMD_READ 0x180
#define WB_EECMD_ERASE 0x1c0
/*
* Winbond TX/RX descriptor structure.
*/
struct wb_desc {
u_int32_t wb_status;
u_int32_t wb_ctl;
u_int32_t wb_ptr1;
u_int32_t wb_ptr2;
};
#define wb_data wb_ptr1
#define wb_next wb_ptr2
#define WB_RXSTAT_CRCERR 0x00000002
#define WB_RXSTAT_DRIBBLE 0x00000004
#define WB_RXSTAT_MIIERR 0x00000008
#define WB_RXSTAT_LATEEVENT 0x00000040
#define WB_RXSTAT_GIANT 0x00000080
#define WB_RXSTAT_LASTFRAG 0x00000100
#define WB_RXSTAT_FIRSTFRAG 0x00000200
#define WB_RXSTAT_MULTICAST 0x00000400
#define WB_RXSTAT_RUNT 0x00000800
#define WB_RXSTAT_RXTYPE 0x00003000
#define WB_RXSTAT_RXERR 0x00008000
#define WB_RXSTAT_RXLEN 0x3FFF0000
#define WB_RXSTAT_RXCMP 0x40000000
#define WB_RXSTAT_OWN 0x80000000
#define WB_RXBYTES(x) ((x & WB_RXSTAT_RXLEN) >> 16)
#define WB_RXSTAT (WB_RXSTAT_FIRSTFRAG|WB_RXSTAT_LASTFRAG|WB_RXSTAT_OWN)
#define WB_RXCTL_BUFLEN1 0x00000FFF
#define WB_RXCTL_BUFLEN2 0x00FFF000
#define WB_RXCTL_RLINK 0x01000000
#define WB_RXCTL_RLAST 0x02000000
#define WB_TXSTAT_DEFER 0x00000001
#define WB_TXSTAT_UNDERRUN 0x00000002
#define WB_TXSTAT_COLLCNT 0x00000078
#define WB_TXSTAT_SQE 0x00000080
#define WB_TXSTAT_ABORT 0x00000100
#define WB_TXSTAT_LATECOLL 0x00000200
#define WB_TXSTAT_NOCARRIER 0x00000400
#define WB_TXSTAT_CARRLOST 0x00000800
#define WB_TXSTAT_TXERR 0x00001000
#define WB_TXSTAT_OWN 0x80000000
#define WB_TXCTL_BUFLEN1 0x000007FF
#define WB_TXCTL_BUFLEN2 0x003FF800
#define WB_TXCTL_PAD 0x00800000
#define WB_TXCTL_TLINK 0x01000000
#define WB_TXCTL_TLAST 0x02000000
#define WB_TXCTL_NOCRC 0x08000000
#define WB_TXCTL_FIRSTFRAG 0x20000000
#define WB_TXCTL_LASTFRAG 0x40000000
#define WB_TXCTL_FINT 0x80000000
#define WB_MAXFRAGS 16
#define WB_RX_LIST_CNT 64
#define WB_TX_LIST_CNT 128
#define WB_MIN_FRAMELEN 60
#define ETHER_ALIGN 2
/*
* A transmit 'super descriptor' is actually WB_MAXFRAGS regular
* descriptors clumped together. The idea here is to emulate the
* multi-fragment descriptor layout found in devices such as the
* Texas Instruments ThunderLAN and 3Com boomerang and cylone chips.
* The advantage to using this scheme is that it avoids buffer copies.
* The disadvantage is that there's a certain amount of overhead due
* to the fact that each 'fragment' is 16 bytes long. In my tests,
* this limits top speed to about 10.5MB/sec. It should be more like
* 11.5MB/sec. However, the upshot is that you can achieve better
* results on slower machines: a Pentium 200 can pump out packets at
* same speed as a PII 400.
*/
struct wb_txdesc {
struct wb_desc wb_frag[WB_MAXFRAGS];
};
#define WB_TXNEXT(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_next
#define WB_TXSTATUS(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_status
#define WB_TXCTL(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_ctl
#define WB_TXDATA(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_data
#define WB_TXOWN(x) x->wb_ptr->wb_frag[0].wb_status
#define WB_UNSENT 0x1234
#define WB_BUFBYTES (1024 * sizeof(u_int32_t))
struct wb_buf {
u_int32_t wb_data[1024];
};
struct wb_list_data {
struct wb_buf wb_rxbufs[WB_RX_LIST_CNT];
struct wb_desc wb_rx_list[WB_RX_LIST_CNT];
struct wb_txdesc wb_tx_list[WB_TX_LIST_CNT];
};
struct wb_chain {
struct wb_txdesc *wb_ptr;
struct mbuf *wb_mbuf;
struct wb_chain *wb_nextdesc;
u_int8_t wb_lastdesc;
};
struct wb_chain_onefrag {
struct wb_desc *wb_ptr;
struct mbuf *wb_mbuf;
void *wb_buf;
struct wb_chain_onefrag *wb_nextdesc;
u_int8_t wb_rlast;
};
struct wb_chain_data {
u_int8_t wb_pad[WB_MIN_FRAMELEN];
struct wb_chain_onefrag wb_rx_chain[WB_RX_LIST_CNT];
struct wb_chain wb_tx_chain[WB_TX_LIST_CNT];
struct wb_chain_onefrag *wb_rx_head;
struct wb_chain *wb_tx_head;
struct wb_chain *wb_tx_tail;
struct wb_chain *wb_tx_free;
};
struct wb_type {
u_int16_t wb_vid;
u_int16_t wb_did;
char *wb_name;
};
struct wb_mii_frame {
u_int8_t mii_stdelim;
u_int8_t mii_opcode;
u_int8_t mii_phyaddr;
u_int8_t mii_regaddr;
u_int8_t mii_turnaround;
u_int16_t mii_data;
};
/*
* MII constants
*/
#define WB_MII_STARTDELIM 0x01
#define WB_MII_READOP 0x02
#define WB_MII_WRITEOP 0x01
#define WB_MII_TURNAROUND 0x02
struct wb_softc {
struct ifnet *wb_ifp; /* interface info */
device_t wb_miibus;
bus_space_handle_t wb_bhandle;
bus_space_tag_t wb_btag;
struct resource *wb_res;
struct resource *wb_irq;
void *wb_intrhand;
struct wb_type *wb_info; /* Winbond adapter info */
u_int8_t wb_type;
u_int16_t wb_txthresh;
int wb_cachesize;
caddr_t wb_ldata_ptr;
struct wb_list_data *wb_ldata;
struct wb_chain_data wb_cdata;
struct callout wb_stat_callout;
struct mtx wb_mtx;
};
#define WB_LOCK(_sc) mtx_lock(&(_sc)->wb_mtx)
#define WB_UNLOCK(_sc) mtx_unlock(&(_sc)->wb_mtx)
#define WB_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->wb_mtx, MA_OWNED)
/*
* register space access macros
*/
#define CSR_WRITE_4(sc, reg, val) \
bus_space_write_4(sc->wb_btag, sc->wb_bhandle, reg, val)
#define CSR_WRITE_2(sc, reg, val) \
bus_space_write_2(sc->wb_btag, sc->wb_bhandle, reg, val)
#define CSR_WRITE_1(sc, reg, val) \
bus_space_write_1(sc->wb_btag, sc->wb_bhandle, reg, val)
#define CSR_READ_4(sc, reg) \
bus_space_read_4(sc->wb_btag, sc->wb_bhandle, reg)
#define CSR_READ_2(sc, reg) \
bus_space_read_2(sc->wb_btag, sc->wb_bhandle, reg)
#define CSR_READ_1(sc, reg) \
bus_space_read_1(sc->wb_btag, sc->wb_bhandle, reg)
#define WB_TIMEOUT 1000
/*
* General constants that are fun to know.
*
* Winbond PCI vendor ID
*/
#define WB_VENDORID 0x1050
/*
* Winbond device IDs.
*/
#define WB_DEVICEID_840F 0x0840
/*
* Compex vendor ID.
*/
#define CP_VENDORID 0x11F6
/*
* Compex device IDs.
*/
#define CP_DEVICEID_RL100 0x2011
/*
* PCI low memory base and low I/O base register, and
* other PCI registers.
*/
#define WB_PCI_VENDOR_ID 0x00
#define WB_PCI_DEVICE_ID 0x02
#define WB_PCI_COMMAND 0x04
#define WB_PCI_STATUS 0x06
#define WB_PCI_CLASSCODE 0x09
#define WB_PCI_CACHELEN 0x0C
#define WB_PCI_LATENCY_TIMER 0x0D
#define WB_PCI_HEADER_TYPE 0x0E
#define WB_PCI_LOIO 0x10
#define WB_PCI_LOMEM 0x14
#define WB_PCI_BIOSROM 0x30
#define WB_PCI_INTLINE 0x3C
#define WB_PCI_INTPIN 0x3D
#define WB_PCI_MINGNT 0x3E
#define WB_PCI_MINLAT 0x0F
#define WB_PCI_RESETOPT 0x48
#define WB_PCI_EEPROM_DATA 0x4C
/* power management registers */
#define WB_PCI_CAPID 0xDC /* 8 bits */
#define WB_PCI_NEXTPTR 0xDD /* 8 bits */
#define WB_PCI_PWRMGMTCAP 0xDE /* 16 bits */
#define WB_PCI_PWRMGMTCTRL 0xE0 /* 16 bits */
#define WB_PSTATE_MASK 0x0003
#define WB_PSTATE_D0 0x0000
#define WB_PSTATE_D1 0x0002
#define WB_PSTATE_D2 0x0002
#define WB_PSTATE_D3 0x0003
#define WB_PME_EN 0x0010
#define WB_PME_STATUS 0x8000
Reference in New Issue View Git Blame Copy Permalink