1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
freebsd/sys/dev/e1000/e1000_ich8lan.h
Jack F Vogel 8ec87fc514 Update to igb and em:
em revision 7.0.0:
	- Using driver devclass, seperate legacy (pre-pcie) code
	  into a seperate source file. This will at least help
	  protect against regression issues. It compiles along
	  with em, and is transparent to end use, devices in each
	  appear to be 'emX'. When using em in a modular form this
	  also allows the legacy stuff to be defined out.
	- Add tx and rx rings as in igb, in the 82574 this becomes
	  actual multiqueue for the first time (2 queues) while in
	  other PCIE adapters its just make code cleaner.
	- Add RX mbuf handling logic that matches igb, this will
	  eliminate packet drops due to temporary mbuf shortage.

igb revision 1.9.3:
	- Following the ixgbe code, use a new approach in what
	  was called 'get_buf', the routine now has been made
	  independent of rxeof, it now does the update to the
	  engine TDT register, this design allows temporary
	  mbuf resources to become non-critical, not requiring
	  a packet to be discarded, instead it just returns and
	  does not increment the tail pointer.
	- With the above change it was also unnecessary to keep
	  'spare' maps around, since we do not have the discard
	  issue.
	- Performance tweaks and improvements to the code also.

MFC in a week
2010-03-29 23:36:34 +00:00

207 lines
9.0 KiB
C

/******************************************************************************
Copyright (c) 2001-2010, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
/*$FreeBSD$*/
#ifndef _E1000_ICH8LAN_H_
#define _E1000_ICH8LAN_H_
#define ICH_FLASH_GFPREG 0x0000
#define ICH_FLASH_HSFSTS 0x0004
#define ICH_FLASH_HSFCTL 0x0006
#define ICH_FLASH_FADDR 0x0008
#define ICH_FLASH_FDATA0 0x0010
/* Requires up to 10 seconds when MNG might be accessing part. */
#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000
#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000
#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000
#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
#define ICH_CYCLE_READ 0
#define ICH_CYCLE_WRITE 2
#define ICH_CYCLE_ERASE 3
#define FLASH_GFPREG_BASE_MASK 0x1FFF
#define FLASH_SECTOR_ADDR_SHIFT 12
#define ICH_FLASH_SEG_SIZE_256 256
#define ICH_FLASH_SEG_SIZE_4K 4096
#define ICH_FLASH_SEG_SIZE_8K 8192
#define ICH_FLASH_SEG_SIZE_64K 65536
#define ICH_FLASH_SECTOR_SIZE 4096
#define ICH_FLASH_REG_MAPSIZE 0x00A0
#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */
#define E1000_ICH_FWSM_DISSW 0x10000000 /* FW Disables SW Writes */
/* FW established a valid mode */
#define E1000_ICH_FWSM_FW_VALID 0x00008000
#define E1000_ICH_MNG_IAMT_MODE 0x2
#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
(ID_LED_OFF1_OFF2 << 8) | \
(ID_LED_OFF1_ON2 << 4) | \
(ID_LED_DEF1_DEF2))
#define E1000_ICH_NVM_SIG_WORD 0x13
#define E1000_ICH_NVM_SIG_MASK 0xC000
#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
#define E1000_ICH_NVM_SIG_VALUE 0x80
#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
#define E1000_FEXTNVM_SW_CONFIG 1
#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M */
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
#define E1000_ICH_RAR_ENTRIES 7
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
((reg) & MAX_PHY_REG_ADDRESS))
#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */
#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */
#define IGP3_CAPABILITY PHY_REG(776, 19) /* Capability */
#define IGP3_PM_CTRL PHY_REG(769, 20) /* Power Management Control */
#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002
#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
#define IGP3_PM_CTRL_FORCE_PWR_DOWN 0x0020
/* PHY Wakeup Registers and defines */
#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
#define HV_SCC_UPPER PHY_REG(778, 16) /* Single Collision Count */
#define HV_SCC_LOWER PHY_REG(778, 17)
#define HV_ECOL_UPPER PHY_REG(778, 18) /* Excessive Collision Count */
#define HV_ECOL_LOWER PHY_REG(778, 19)
#define HV_MCC_UPPER PHY_REG(778, 20) /* Multiple Collision Count */
#define HV_MCC_LOWER PHY_REG(778, 21)
#define HV_LATECOL_UPPER PHY_REG(778, 23) /* Late Collision Count */
#define HV_LATECOL_LOWER PHY_REG(778, 24)
#define HV_COLC_UPPER PHY_REG(778, 25) /* Collision Count */
#define HV_COLC_LOWER PHY_REG(778, 26)
#define HV_DC_UPPER PHY_REG(778, 27) /* Defer Count */
#define HV_DC_LOWER PHY_REG(778, 28)
#define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */
#define HV_TNCRS_LOWER PHY_REG(778, 30)
#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
/* SMBus Address Phy Register */
#define HV_SMB_ADDR PHY_REG(768, 26)
#define HV_SMB_ADDR_PEC_EN 0x0200
#define HV_SMB_ADDR_VALID 0x0080
/* Strapping Option Register - RO */
#define E1000_STRAP 0x0000C
#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
/* OEM Bits Phy Register */
#define HV_OEM_BITS PHY_REG(768, 25)
#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
#define LCD_CFG_PHY_ADDR_BIT 0x0020 /* Phy address bit from LCD Config word */
/* KMRN Mode Control */
#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
#define HV_KMRN_MDIO_SLOW 0x0400
/* PHY Power Management Control */
#define HV_PM_CTRL PHY_REG(770, 17)
#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
/*
* Additional interrupts need to be handled for ICH family:
* DSW = The FW changed the status of the DISSW bit in FWSM
* PHYINT = The LAN connected device generates an interrupt
* EPRST = Manageability reset event
*/
#define IMS_ICH_ENABLE_MASK (\
E1000_IMS_DSW | \
E1000_IMS_PHYINT | \
E1000_IMS_EPRST)
/* Additional interrupt register bit definitions */
#define E1000_ICR_LSECPNC 0x00004000 /* PN threshold - client */
#define E1000_IMS_LSECPNC E1000_ICR_LSECPNC /* PN threshold - client */
#define E1000_ICS_LSECPNC E1000_ICR_LSECPNC /* PN threshold - client */
/* Security Processing bit Indication */
#define E1000_RXDEXT_LINKSEC_STATUS_LSECH 0x01000000
#define E1000_RXDEXT_LINKSEC_ERROR_BIT_MASK 0x60000000
#define E1000_RXDEXT_LINKSEC_ERROR_NO_SA_MATCH 0x20000000
#define E1000_RXDEXT_LINKSEC_ERROR_REPLAY_ERROR 0x40000000
#define E1000_RXDEXT_LINKSEC_ERROR_BAD_SIG 0x60000000
void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
bool state);
void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
void e1000_disable_gig_wol_ich8lan(struct e1000_hw *hw);
s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_config);
s32 e1000_hv_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
#endif