1
0
mirror of https://git.savannah.gnu.org/git/emacs/org-mode.git synced 2024-12-24 10:38:41 +00:00
org-mode/README_maintainer

227 lines
9.0 KiB
Plaintext
Raw Normal View History

# -*- mode:org -*-
#+title: Maintainer tasks
2010-11-16 14:22:14 +00:00
#+startup: noindent
This document describes the tasks the Org-mode maintainer has to do
and how they are performed.
* Working with patchwork
John Wiegley is running a patchwork server that looks at the
emacs-orgmode mailing list and extracts patches. The maintainer and
his helpers should work through such patches, give feedback on them
and apply the ones which are good and done.
I have found that the best workflow for this is using the pw script by
Nate Case, with the modifications for Org-mode made by John Wiegley
and Carsten Dominik. The correct version of this script that should
be used with Org mode is distributed in the UTILITIES directory of the
Org mode distribution. Here is the basic workflow for this.
** Access to the patchwork server
If you want to work on patchwork patches, you need write access at the
patchwork server. You need to contact John Wiegley to get this
access.
There is a web interface to look at the patches and to change the
status of patches. This interface is self-explanatory. There is also
a command line script which can be very convenient to use.
** Testing patches
To start testing a patch, first assign it to yourself
: pw update -s "Under Review" -d DELEGATE-NAME NNN
where =NNN= is a patch number and =DELEGATE-NAME= is your user name on
the patchwork server.
The get the patch into a branch:
: pw branch NNN
This will create a local topic branch in your git repository with the
name =t/patchNNN=. You will also be switched to the branch so that
you can immediately start testing it. Quite often small amends need
to be made, or documentation has to be added. Also, many contributors
do not yet provide the proper ChangeLog-like entries in the commit
message for the patch. As a maintainer, you have two options here.
Either ask the contributor to make the changes and resubmit the patch,
or fix it yourself. In principle, asking to contributor to change the
patch until it is complete is the best route, because it will educate
the contributor and minimize the work for the maintainer. However,
sometimes it can be less hassle to fix things directly and commit the
changes to the same branch =t/patchNNN=.
If you ask the contributor to make the changes, the patch should be
marked on the patchwork server as "changes requested".
: pw update -s "Changed Requested" -m "What to change" NNN
2010-11-16 14:17:15 +00:00
This will send an email to the contributor and the mailing list with a
request for changes. The =-m= message should not be more than one
sentence and describe the requested changes. If you need to explain
in more detail, write a separate email to the contributor.
When a new version of the patch arrives, you mark the old one as
superseded
: pw update -s "Superseded" NNN
and start working at the new one.
** Merging a final patch
Once the patch has been iterated and is final (including the
ChangeLog-like entries in the commit message), it should be merged.
The assumption here is that the final version of the patch is given by
the HEAD state in the branch =t/patchNNN=. To merge, do this:
: pw merge -m "maintainer comment" NNN
2010-11-16 14:17:15 +00:00
This will merge the patch into master, switch back to master and send
an email to both contributor and mailing list stating that this change
has been accepted, along with the comment given in the =-m= message.
At some point you might then want to remove the topic branch
: git -d t/patchNNN
* Releases
** Main releases
The release number for main releases look like this: =7.13=
Main releases are made whenever Org is in a state where the feature
set is consistent and we feel that the features that are implemented
is something we want to support in the future.
A major release turns the current state of the master branch into a
release. The release process is a single make command:
: make release TAG=7.13
2010-10-23 06:18:06 +00:00
Before issuing this command, you should make sure that everything
during the process will work right, you can do so my running
: make testrelease TAG=7.13
When this fails, make sure to clean up. =git reset --hard= if
necessary, and check if there are unwanted files, directories, or
branches left over from the testing.
** Minor releases
The release number for minor releases look like this: =7.13.01=
Minor releases are small amends to main releases. Usually they fix
2010-10-16 05:19:00 +00:00
bugs discovered in a main release. Only the fix to the bug is
bundled into a release, without the main development work going on in
2010-11-16 14:17:15 +00:00
the master branch. Since the bug fix will also be needed in the
master branch, usually the fix is made in master and then
cherry-picked into maint. When this is done, a release is made from
maint with this command:
: make fixrelease TAG=7.13.01
2010-10-23 06:18:06 +00:00
** Between releases
While working on master between releases, I use something like
7.02trans as the version string. To set this version string in all
relevant files, use
: UTILITIES/set_version 7.02trans
and commit the result. Note that the above command does not change
the version string in the file from which Org's homepage is
generated. To change that as well, you would use a =--all= flag. TO
change only this file, use =--only=.
* Synchonization with Emacs
This is still a significant headache. Some hand work is needed here.
2010-11-16 14:17:15 +00:00
Emacs uses bzr, and while I see all the advantages this would have, I
2010-10-23 06:18:06 +00:00
cannot bring myself to switch away from git for my day-to-day work.
So the way I have been doing things with Emacs is this:
2010-10-23 06:18:06 +00:00
1. I do not update the version in Emacs too often. Just once every
few month - this is frequently enough for the Emacs release cycle.
2. I watch the Emacs diffs for changes made by the maintainers of
Emacs in the org-mode files in Emacs. Any changes that come up
there, I merge into the development version of Org-mode.
Occasionally I do not do this, if I do not agree with a change.
The changes go into Org /without/ a ChangeLog-like entry in the
commit message. The reason for this is that we will later generate
a ChangeLog file from our commit messages, and I do not want double
2010-10-23 06:18:06 +00:00
ChangeLog entries in the Emacs ChangeLog file.
2010-10-23 06:18:06 +00:00
3. When I have made a release (usually I wait for the minor releases
to stabilize), I *copy* org files into the Emacs repository. Yes,
I do not merge, I copy. This has been the source of some problems
in the past - but I have not had the patience to work out a better
mechanism, and I really dislike the idea that the version in Emacs
starts diverging from my own.
2010-10-23 06:18:06 +00:00
Careful: Copy /org.texi/ and /orgcard.tex/ into the right places,
and also copy the lisp files with *two exceptions*: Do *not* copy
/org-colview-xemacs.el/ and /org-install.el/. The former does not
belong in Emacs. And the latter would actually be harmful because
Emacs generates its own autoloads. The Emacs distribution contains
an empty org-install.el, so that users can have =(require
'org-install)= in .emacs with no ill effects. So if you were to
copy org-install.el, you would overwrite that empty placeholder
file.
2010-10-23 06:18:06 +00:00
4. Generate the ChangeLog entries
For this, I do in the org-mode git repository
: UTILITIES/make_emacs_changelog release_7.02.05..release_7.03.02
2010-10-23 06:18:06 +00:00
This will spit out ChangeLog entries (for the given commit range)
that need to go into the ChangeLog files in Emacs. Org-mode
contributes to 3 different ChangeLog files in Emacs:
: lisp/org/ChangeLog (for lisp changes)
: doc/misc/ChangeLog (for org.texi changes)
: etc/ChangeLog (for refcard changes)
When you run the =make_emacs_changelog= program, you will be
prompted for a date in ISO format YYYY-MM-DD, this date will be
used in the ChangeLog entries - Emacs wants these dates to be the
time when the change has been installed into Emacs, not the time
when we made the change in our own repository. You will also be
prompted for the kind of ChangeLog you want to make, possible
answers are =lisp=, =texi=, and =card=. The program will then
select the correct entries for the specified ChangeLog file. If
you don't like being prompted, you can give the date and type as
second and third command line arguments to =make_emacs_changelog=.
These entries need to be added to the ChangeLog files in Emacs.
You should, in the ChangeLog file, select the inserted region of
new entries and do =M-x fill-region=, so that the entries are
formatted correctly. I then do look through the entries quickly to
make sure they are formatted properly, that the email addresses
look right etc.
5. Commit the changes into the bzr repository and you are done. Emacs
developers often look throught the commit and make minor changes -
these need to be merged back into our own repo.
* Updating the list of hooks on Worg
The file org-configs/org-hooks.org contains a list of all hooks in
Org. This list has to be updated after hooks have been added or
removed. The perl script UTILITIES/list-hooks.pl creates the entire
section "Hooks and Function variables", including its level-one
headline. I guess babel code could be used to update this
automatically, but I have not implemented this - I have been doing
it by hand every few months.