Trim the post and inline the AI disclaimer.
All checks were successful
build-staging Build build-staging has succeeded

Natter does not yet support noexport or the AI disclaimer page, so I've inlined this for now.
This commit is contained in:
Tom Alexander
2026-11-01 13:25:34 -05:00
parent fa72cbcb55
commit 8953e79464

View File

@@ -15,9 +15,11 @@ I purchased both cards and tested them in my Framework 13 AMD 7040 laptop to see
* AI Disclaimer
AI was not used for any part of this post. LLMs are a powerful tool that are rapidly changing the tech landscape. While I recognize their value, they have created an imbalance. In the past, each article/post took more effort to produce than it took to read. Today, an LLM can generate an infinite pile of posts before lunch. While low quality and high quality posts are possible both with and without LLMs, I have written every word of this post and every line of code without an LLM. Therefore this article took more effort to produce than it takes to read.
# TODO: Add support to natter for a specific AI disclaimer tag that could be rendered below the article title
# TODO: Add support for "page:" links similar to "post:" links in natter.
This article is at AI level: None. [[https://fizz.buzz/post_ai_levels][Click here to see what this means and why this matters]].
# This article is at AI level: None. [[https://fizz.buzz/post_ai_levels][Click here to see what this means and why this matters]].
* Conclusion
@@ -109,83 +111,6 @@ The MT7927 claims support for [[https://en.wikipedia.org/wiki/TDLS][T-DLS]] wher
I could not get T-DLS working between two machines both running an MT7927. I had to replace =iwd= with =wpa_supplicant= since =iwd= does not support =T-DLS=. I managed to get the two devices to establish a link, but once that link was established, all traffic between those two devices immediately stopped.
*** Mesh :noexport:
The QCNCM865 supports mesh but the MT7927 does not.
*** Beamformer :noexport:
The QCNCM865 supports SU Beamformer but the MT7927 does not.
*** Spatial Streams :noexport:
The QCNCM865 supports more spatial streams than the MT7927.
| | MT7927 | QCNCM865 |
|---------+--------+----------|
| 80 MHz | 1 | 7 |
| 160 MHz | 1 | 3 |
| 320 MHz | | 3 |
*** MU-MIMO :noexport:
The MT7927 supports MU-MIMO whereas the QCNCM865 does not.
*** Feedback :noexport:
The MT7927 supports feedback whereas the QCNCM865 does not.
*** Target Wake Time :noexport:
The QCNCM865 supports Broadcast TWT whereas the MT7927 does not.
*** Longer Than 16HE SIG-B OFDM Symbols :noexport:
The MT7927 supports Longer Than 16HE SIG-B OFDM Symbols but the QCNCM865 does not.
*** Restricted TWP :noexport:
The QCNCM865 supports Restricted TWP but the MT7927 does not.
*** Supported Commands :noexport:
The MT7927 supports a few more commands than the QCNCM865. Those commands being:
- =tdls_mgmt=
- =tdls_oper=
- =start_sched_scan=
- =set_sar_specs=
*** Software Interface Modes (can always be added) :noexport:
The MT7927 supports AP/VLAN but the QCNCM865 does not.
*** Other Features :noexport:
**** Only MT7927
Device supports active monitor (which will ACK incoming frames)
[ SET_SCAN_DWELL ]: scan dwell setting
[ BEACON_RATE_LEGACY ]: legacy beacon rate setting
[ BEACON_RATE_HT ]: HT beacon rate setting
[ BEACON_RATE_VHT ]: VHT beacon rate setting
[ AQL ]: Airtime Queue Limits (AQL)
**** Only QCNCM865
Device supports AP scan
Device can update TPC Report IE
Device supports static SMPS
Device supports dynamic SMPS
Maximum associated stations in AP mode: 512
[ UNSOL_BCAST_PROBE_RESP ]: unsolicated broadcast probe response
[ BSS_COLOR ]: BSS coloring support
[ PUNCT ]: preamble puncturing in AP mode
* Test Setup
My test setup consisted of a Framework 13 AMD 7040 laptop with each of the wifi cards, connecting to a [[https://techspecs.ui.com/unifi/wifi/u7-pro][Ubiquiti UniFi U7 Pro]].