* emacs.c (main) [HAVE_PTHREAD && !SYSTEM_MALLOC && !DOUG_LEA_MALLOC]:
Do not clear _malloc_thread_enabled_p, undoing the previous change,
which did not work (see <http://bugs.gnu.org/14569#307>).
(main): Do not invoke malloc_enable_thread if (! CANNOT_DUMP
&& (!noninteractive || initialized)). This attempts to thread
the needle between the Scylla of FreeBSD and the Charybdis of Cygwin.
call of `occur-read-primary-args' to interactive spec.
* lisp/ibuffer.el (ibuffer-mode-map): Bind "M-s a C-o" to
`ibuffer-do-occur' like in buff-menu.el.
Fixes: debbugs:14673
`Buffer-menu-multi-occur'. Add it to the menu.
(Buffer-menu-mode): Document it in docstring.
(Buffer-menu-multi-occur): New command.
Fixes: debbugs:14673
* lisp/info.el (Info-find-node, Info-find-in-tag-table)
(Info-find-node-in-buffer, Info-find-node-2, Info-goto-node):
Add option for exact case matching of nodes.
* lisp/info-xref.el (info-xref): New custom group.
(info-xref-case-fold): New option.
(info-xref-goto-node-p): Pass info-xref-case-fold to Info-goto-node.
middle of block statement initially, lower the depth. Remove
FIXME comment, not longer valid. Remove middle of block statement
detection, no need to do that anymore since we've been using
`ruby-parse-region' here.
src/xdisp.c (IT_OVERFLOW_NEWLINE_INTO_FRINGE): Don't disallow
word-wrap, so that overflow-newline-into-fringe would work in
visual-line-mode.
(move_it_in_display_line_to): When the last scanned display
element fits exactly on the display line, and
overflow-newline-into-fringe is non-nil, but wrap_it is valid,
don't return MOVE_NEWLINE_OR_CR, but instead back up to the last
wrap point and return MOVE_LINE_CONTINUED. Fixes problems with
finding buffer position that corresponds to pixel coordinates,
e.g. in buffer_posn_from_coords.
2012-03-22 Lars Magne Ingebrigtsen <larsi@gnus.org>
* gnus.texi (Client-Side IMAP Splitting):
Note that `nnimap-inbox' now can be a list.
2013-06-05 David Engster <deng@randomsample.de>
* gnus-sum.el (gnus-update-marks): Do not remove empty 'unexist'
ranges, since `nnimap-retrieve-group-data-early' also uses it as a flag
to see whether the group was synced before.
2012-09-05 Martin Stjernholm <mast@lysator.liu.se>
* nnimap.el (nnimap-request-move-article): Decode the group name when
doing internal moves to avoid charset issues.
2012-09-05 Julien Danjou <julien@danjou.info>
* nnimap.el (nnimap-request-list):
Revert change that made listing synchronous.
(nnimap-get-responses): Restore.
2012-08-31 Dave Abrahams <dave@boostpro.com>
* nnimap.el (nnimap-change-group): Document result value.
* nnimap.el (nnimap-find-article-by-message-id):
Account for the fact that nnimap-change-group can return t.
2012-08-06 Julien Danjou <julien@danjou.info>
* nnimap.el (nnimap-request-head):
Resture to-buffer parameter, used by `nnimap-request-move-article'.
* nnimap.el (nnimap-request-head): Remove to-buffer argument.
* gnus-int.el (gnus-request-head): Remove to-buffer argument, only
supported by nnimap actually. Reverts previous change.
* gnus-int.el (gnus-request-head): Add an optional to-buffer parameter
to mimic `gnus-request-article' and enjoy backends the nn*-request-head
to-buffer argument that is already supported.
2012-07-24 Julien Danjou <julien@danjou.info>
* nnimap.el (nnimap-get-responses): Remove, unused.
2012-06-25 Julien Danjou <julien@danjou.info>
* nnimap.el (nnimap-request-articles-find-limit): Rename from
`nnimap-request-move-articles-find-limit' since we do not use it
only for move operations.
(nnimap-request-accept-article):
Use `nnimap-request-articles-find-limit' to limit search by message-id.
2012-06-19 Julien Danjou <julien@danjou.info>
* nnir.el (nnir-run-imap): Fix, use `nnimap-change-group'.
* nnimap.el (nnimap-log-buffer):
Check that `window-point-insertion-type' is boundp, since it's not
available in XEmacs.
2012-06-19 Michael Welsh Duggan <md5i@md5i.com>
* nnimap.el (nnimap-log-buffer):
Add this, setting `window-point-insertion-type' in the buffer to t.
(nnimap-log-command): Use nnimap-log-buffer.
2012-06-19 Julien Danjou <julien@danjou.info>
* nnimap.el (nnimap-find-article-by-message-id):
Add an optional limit argument to be able to limit the search.
(nnimap-request-move-article):
Use `nnimap-request-move-articles-find-limit'.
(nnimap-request-move-articles-find-limit):
Add this to limit the search by Message-Id after a message move.
(nnimap): Add defgroup.
2012-06-15 Julien Danjou <julien@danjou.info>
* nnimap.el (nnimap-find-article-by-message-id):
Use `nnimap-possibly-change-group' rather than its own EXAMINE call.
(nnimap-possibly-change-group): Add read-only argument.
(nnimap-request-list): Use nnimap-possibly-change-group rather than
issuing EXAMINE manually.
(nnimap-find-article-by-message-id):
Use `nnimap-possibly-change-group' with read-only argument.
(nnimap-change-group): Rename from `nnimap-possibly-change-group'.
We cannot possibly change because we need to be sure that it's either
read-write or read-only.
2012-06-10 Lars Magne Ingebrigtsen <larsi@gnus.org>
* gnus-sum.el (gnus-summary-insert-old-articles):
Don't include unexistent messages.
2012-04-10 Lars Magne Ingebrigtsen <larsi@gnus.org>
* gnus-start.el (gnus-clean-old-newsrc):
Remove totally bogus `unexists' entries.
(gnus-clean-old-newsrc): Fix last checkin.
* nnimap.el (nnimap-update-info):
None of the articles below the active low-water mark exist.
2012-03-27 Katsumi Yamaoka <yamaoka@jpl.org>
* nnimap.el (gnus-refer-thread-use-nnir): Silence the byte compiler.
2012-03-22 Sergio Martinez <samf0xb58@gmail.com> (tiny change)
* nnimap.el (nnimap-request-scan):
Allow `nnimap-inbox' to be a list of inboxes.
2012-03-10 Lars Magne Ingebrigtsen <larsi@gnus.org>
* gnus-group.el (gnus-group-expire-articles-1):
Don't try to expire messages that don't exist.
* gnus-sum.el (gnus-summary-expire-articles): Ditto.
2012-02-20 Lars Ingebrigtsen <larsi@gnus.org>
* gnus-start.el (gnus-clean-old-newsrc): Allow a FORCE parameter.
2012-02-15 Lars Ingebrigtsen <larsi@gnus.org>
* gnus-start.el (gnus-clean-old-newsrc):
Delete `unexist' from pre-Ma Gnus 0.3.
2012-02-15 Lars Ingebrigtsen <larsi@gnus.org>
* gnus-sum.el (gnus-summary-local-variables):
Make `gnus-newsgroup-unexist' into a local variable.
2012-02-11 Lars Ingebrigtsen <larsi@gnus.org>
* gnus-sum.el (gnus-adjust-marked-articles):
Add to `gnus-newsgroup-unexist'.
* gnus.el (gnus-article-mark-lists):
Add `unexist' to the list of marks.
(gnus-article-special-mark-lists):
Put the `unexist' in the special marks list instead.
* gnus-sum.el (gnus-articles-to-read): Don't include unexisting
articles in the list of articles to be selected.
* nnimap.el (nnimap-retrieve-group-data-early):
Query for unexisting articles.
(nnimap-update-info): Keep track of unexisting articles.
(nnimap-update-qresync-info): Ditto.
2012-02-01 Lars Ingebrigtsen <larsi@gnus.org>
* gnus-start.el (gnus-clean-old-newsrc): New function.
(gnus-read-newsrc-file): Use it.
It isn't portable C, and it's easy enough to avoid.
* alloc.c: Verify SAVE_FUNCPOINTER bits, too.
(make_save_value): Add support for SAVE_FUNCPOINTER.
* keymap.c (map_keymap_char_table_item, map_keymap_internal):
* print.c (print_object):
Distinguish function from object pointers.
* lisp.h (SAVE_FUNCPOINTER): New constant.
(SAVE_SLOT_BITS): Adjust to it.
(SAVE_TYPE_FUNCPTR_PTR_OBJ): New constant, replacing
SAVE_TYPE_PTR_PTR_OBJ. Change the only use.
(voidfuncptr): New typedef.
(struct Lisp_Save_Value): New member data[0].funcpointer.
(XSAVE_FUNCPOINTER): New function.
* Makefile.in (buildobj.h): Make it a sequence of strings each
followed by comma, rather than a single string. Put it into a
.tmp file in case there's an error while generating it.
(gl-stamp): Use .tmp for temp files.
(mostlyclean): Clean .tmp files.
* doc.c (buildobj): Move to just the routine that needs it.
It's now an array of strings, so processing is simpler.
I missed these instances of 'static inline' in an earlier sweep.
* ebrowse.c (putstr):
* etags.c (hash):
* make-docfile.c (put_char): No longer inline.
* etags.c (hash): Prefer int to unsigned when either will do.
Fixes: debbugs:12541
* emacs.c (malloc_enable_thread): Hoist extern decl to top level.
(main) [HAVE_PTHREAD && !SYSTEM_MALLOC && !DOUG_LEA_MALLOC]:
Invoke malloc_enable_thread even when not interactive.
Problem reported by Ken Brown in <http://bugs.gnu.org/14569#275>.
* process.c (init_process_emacs) [CYGWIN]: Tickle glib even
in this case, since the underlying bug has now been fixed.
(desktop-restore-frames): Rename from desktop-save-windows.
(desktop-restore-in-current-display): New customization option.
(desktop--excluded-frame-parameters): Add `font'.
(desktop--save-frames): Rename from desktop--save-windows.
(desktop--restore-in-this-display-p): New function.
(desktop--make-full-frame): Remove unwanted width/height from
full(width|height) frames.
(desktop--restore-frames): Rename from desktop--restore-windows.
Obey desktop-restore-current-display. Do not delete old frames or
select a new frame unless we were able to restore at least one frame.
restarts.
* remember.el (remember-data-file): Add :set callback to affect
notes buffer (if any).
(remember-notes): New command.
(remember-notes-buffer-name, bury-remember-notes-on-kill):
New defcustoms for the `remember-notes' function.
(remember-notes-save-and-bury-buffer): New command.
(remember-notes-mode-map): New variable.
(remember-mode): New minor mode.
(remember-notes--kill-buffer-query): New function.
* lisp/startup.el (initial-buffer-choice): Add notes to custom type.
* src/buffer.c (FKill_buffer): Run `kill-buffer-query-functions'
before checking whether buffer is modified. This lets
`kill-buffer-query-functions' cancel killing of the buffer or save
its content before `kill-buffer' asks user the "Buffer %s
modified; kill anyway?" question.
* remember.el (remember-append-to-file):
Don't mix `find-buffer-visiting' and `get-file-buffer'.
* lisp/files.el (find-file-noselect): Simplify conditional expression.
