* vc.el (vc-next-action): Pass t as NOQUERY argument to
vc-resynch-window here too. This means that all uses of
vc-resynch-window pass t; I'm going to wait until I understand the
situation better before I rip out the NOQUERY argument
altogether.
* vc.el (vc-revert-buffer1): Try to preserve the position of mark
as well as point.
(vc-position-context, vc-find-position-by-context): New functions
to help with that, made out of the old innards of vc-revert-buffer1.
xmakefile. Instead, include it in getloadavg.c, which is the only
place that uses LOAD_AVE_CVT, which is the only reason
<sys/param.h> was here in the first place.
* config.sub: Added machines and operating systems for Emacs
ports, since Emacs now uses config.sub for its configuration.
New manufacturers recognized not to be operating systems: High
Level Hardware (highlevel, defaults to using BSD), Gould
(gould, defaults to System V), Commodore (cbm, defaults to
amigados), National Semiconductor (ns, defaults to Genix), and
Masscomp (masscomp, defaults to RTU).
Recognize the NS1600 (ns16k) and the Clipper (clipper) as
processors.
Recognize these processors with default manufacturers: the
Cydra (cydra) from Cydrome (cydrome), the XPS100 (xps100) from
Honeywell (honeywell), and the Orion (orion) and Orion 1/05
(orion105) from High Level Hardware (highlevel).
If the ISC operating system is given with a version number,
don't kill it and set it to 2.2; just have it default to 2.2
if omitted.
Make Irix SGI's default operating system, not SYSV.
Make BSD Encore's default, so it applies for all Encore
machines, not just the umax and mmax abbreviations.
All of Encore's machines use BSD, not just the ns32k-based
ones. Make it the manufacturer's default.
Make it possible to specify an operating system for a Gould
machine. Make sysv the manufacturer's default, so it applies
when we specify the manufacturer as well as when we omit it.
Add Uniplus (uniplus), Iris (iris), Xenix (xenix), and RTU
(rtu) as recognized operating system names.
Change the usage and help messages.
* configure: Initialize window_system, not indow_system.
* configure: Report which window system, compiler, and signal
handler return type we decide to use.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* vip.el (vip-delete-char, vip-delete-backward-char, ex-delete):
Don't pass nil as a fourth argument to vip-append-to-register; it
takes only three.
(vip-mark-point, ex-mark): Pass required second argument to
point-to-register.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* terminal.el (te-escape-extended-command-unread): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* sun-mouse.el (mouse-second-hit): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* simula.el (simula-electric-label): Same.
* simula.el (simula-calculate-indent): Call backward-word with the
appropriate argument.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* replace.el (perform-replace): Same.
argument instead of implementing it ourselves.
(rectangle-coerce-tab): No longer used; deleted.
* rect.el (open-rectangle): Leave point at the upper corner of the
rectangle just opened, in imitation of open-line. Fix doc typo.
(open-rectangle-line): Use skip-chars-backward's LIM argument to
leave spaces before the line segment's beginning undisturbed.
* rect.el: Provide 'rect.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* mlsupport.el (push-back-character): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* map-ynp.el (map-y-or-n-p): Same.
with \newline; this file is loaded in loaddefs.el, and doesn't
need to follow that convention.
* lpr.el (lpr-command): Add dgux-unix to the list of systems which
want "lp".
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* isearch-mode.el (isearch-update, isearch-unread): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* info.el (Info-summary): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* gnus.el (gnus-Subject-next-article): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* fortran.el (fortran-abbrev-start, fortran-window-create-momentarily):
Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* emerge.el (emerge-show-file-name): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* electric.el (Electric-command-loop): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* ehelp.el (electric-help-command-loop): Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* ebuff-menu.el (electric-buffer-list, Electric-buffer-menu-exit):
Same.
* vip.el (vip-escape-to-emacs, vip-prefix-arg-value,
vip-prefix-arg-com): Use unread-command-event instead of
unread-command-char; respect its new semantics.
* comint.el (comint-dynamic-list-completions): Same.
(free_bloc): This can now be simplified.
* ralloc.c (r_alloc_sbrk): When we allocate new space for the
malloc heap, zero it out even if we don't have any blocs in the
free list.
Added VMS changes from Roland Roberts.
* process.c (read_process_output): Save, widen, insert the process
output, and then restore the restriction if inserting text outside
the visible region.
* process.c (Fstart_process): Establish an unwind-protect to
remove PROC from the process list if an error occurs while
starting it.
(start_process_unwind): New function to help with that.
(create_process): There's no need to explicitly call
remove_process if the fork fails; the record_unwind_protect in
Fstart_process will take care of it.
* process.c (wait_reading_process_input): Test the C preprocessor
symbol "ultrix", not "__ultrix__" to see if we should ignore
ENOMEM errors from select.
* process.c (process_send_signal): On systems which have both
the TIOCGETC and TCGETA ioctls, just use the former.
* s/bsd4-2.h, s/bsd4-3.h: #define SIGNALS_VIA_CHARACTERS.
* process.c (process_send_signal): Put all the code for sending
signals via characters in a #ifdef SIGNALS_VIA_CHARACTERS. Decide
whether to use the Berkeley-style or SYSV-style ioctls by seeing
which ioctl commands are #defined.
* process.c (process_send_signal): Doc fix.
unread_command_char to unread_command_event.
* minibuf.c (read_minibuf): If get_minibuffer gives the
new minibuffer a nil default directory, find another buffer with a
better default directory and use that one's instead.
(Fread_char, Fread_char_exclusive): Don't signal an
error for or throw away switch-frame events; instead, put them off
until after we've found a character we can respond to.
Rename unread_command_char to unread_command_event; it has
subtly different semantics now, and we should use
`make-obsolete-variable' to warn people.
* lread.c (Fread_char): Change reference.
