* Makefile.in (epaths-force-w32): Simplify, assuming that the shell is
bash (as is the case in MSYS).
(msys_w32prefix_subst, msys_sed_sh_escape): Remove (no longer used).
* build-aux/msys-to-w32: simplify the initial over-engineered
interface, and the implementation.
* Makefile.in (epaths-force-w32): Update for the above.
* Makefile.in (AWK, srcdir_doc_info_dir_inputs, info_dir_inputs):
New macros.
(clean): Remove info-dir.*.
(info_dir_deps): Depend on make-info-dir too.
Fix bug with wildcards that weren't expanded.
(${srcdir}/info/dir): Make sure info directory exists.
Don't call pwd; just redirect make-info-dir's stdout to temp file.
* build-aux/make-info-dir: Send output to stdout.
Take input file names from args.
Fix a "FIXME inefficient looping" by using awk's associative arrays.
Basically, this rewrites the script from scratch, and speeds up
'make info/dir' from 2.6s to 0.07s on my platform.
* Makefile.in (ACLOCAL_INPUTS): Add all m4/*.m4 files.
* src/Makefile.in (top_srcdir): New var.
(ntsource, lispsource, ALL_CFLAGS, gl-stamp, emacs.res):
Use '$(top_srcdir)' instead of '$(srcdir)/..';
its expansion is a bit shorter.
(../config.status): Actually build config.status instead of
just complaining.
(ACLOCAL_INPUTS, AUTOCONF_INPUTS):
New macros, copied and relocated from ../Makefile.in.
($(top_srcdir)/aclocal.m4, $(top_srcdir)/configure, config.in)
(../config.status, Makefile): New dependencies and rules,
copied with relocation from ../Makefile.in. This should be more
likely to rebuild the build machinery properly if you do a 'make'
in the src directory.
* Makefile.in (src): No more need to pass BOOTSTRAPEMACS.
* src/Makefile.in (.el.elc): Replace suffix rule with pattern rule.
(%.elc): New pattern rule, with order-only prerequisite.
($(lisp)): No more need to depend on BOOTSTRAPEMACS.
($(lispsource)/loaddefs.el): Use an order-only prerequisite
in place of BOOTSTRAPEMACS.
Fixes: debbugs:2151
* Makefile.in (epaths-force): Don't allow ':' in directories whose
names go into a colon-separated path.
* configure.ac: Fail if submake fails.
Fixes: debbugs:17278
* Makefile.in: Use `make -C' rather than `cd && make' throughout.
* lib-src/Makefile.in (../lib/libgnu.a): Use `make -C' rather than `cd && make'.
* lisp/Makefile.in (leim, semantic): Use `make -C' rather than `cd && make'.
* lwlib/Makefile.in ($(globals_h)): Use `make -C' rather than `cd && make'.
* src/Makefile.in: Use `make -C' rather than `cd && make' throughout.
It's never been anything more than pointless complexity
* configure.ac (INFO_EXT, INFO_OPTS): Remove output variables.
* Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
* doc/emacs/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
* doc/lispintro/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
* doc/lispref/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
* doc/misc/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
Preserve ACLOCAL_PATH in later builds, so that by default it has
the same value as it did in the first build after initial checkout.
* Makefile.in (ACLOCAL_PATH): New macro.
($(srcdir)/aclocal.m4): Use it.
* configure.ac (ACLOCAL_PATH): AC_SUBST it.
* autogen.sh (env_space): New var.
Tell user what variables, if any, to pass to 'configure'.
All uses removed. This hack is no longer needed here
now that we can assume GNU Make's .PHONY feature works.
(bootstrap): No need to make 'info', since 'all' now implies 'info'.
Ref: http://debbugs.gnu.org/16717#45
If no-one objects, we can then start getting rid of some of the
convoluted Makefile hacks that exist to support non-GNU makes.
* configure.ac: Require GNU make.
(HAVE_GNU_MAKE): Remove.
* INSTALL, etc/NEWS, etc/PROBLEMS: Update for this change.
* Makefile.in: Comment.
* Makefile.in (install-info): Handle missing info/dir.
(info_dir_deps): New variable.
(${srcdir}/info/dir): Depend on .texi files rather than .info files.
(check-info): Update topics.
* build-aux/make-info-dir: Use .texi files rather than .info files.
Update topics.
* doc/lispintro/emacs-lisp-intro.texi:
* doc/lispref/elisp.texi:
Tweak dircategory (all the others use "Emacs" + lower-case).
* build-aux/dir_top: Move here from admin/.
* build-aux/make-info-dir: New script.
* Makefile.in (bootstrap-clean): Delete info/.
(info-dir, ${srcdir}/info/dir): New rules.
(info): Also make info-dir.
(check-info): Rename from check-info-dir.
Instead of info/dir entries, check @dircategory in info/*.info.
* make-dist: Use `info' rule rather than `info-real'.
No more info/COPYING (not even the right license for info/ files).
* info/: Remove from repository.
* admin/update_autogen (info_dir):
Use dir_top from build-aux/ rather than admin/.
* .bzrignore: Ignore info/ altogether.
* doc/emacs/Makefile.in: Comment.
This allows us to reuse much of the lisp build and installation machinery,
rather than duplicating it.
* Makefile.in (abs_builddir, leimdir): Remove.
(buildlisppath, SUBDIR, COPYDIR, COPYDESTS): No more leim directory.
(epaths-force-w32): No longer set BLD.
(leim): Remove.
(install-arch-indep): No longer run or install leim.
(mostlyclean, clean): No longer run leim rule.
(bootstrap-clean): Change leim target.
(maintainer-clean): Add leim.
(check-declare): Remove leim.
* README: Update for leim changes.
* configure.ac (leimdir): Remove.
(standardlisppath): No more leimdir.
* make-dist: Update for files from leim/ now being in lisp/leim/.
* doc/lispref/loading.texi (Library Search):
* doc/lispref/os.texi (Startup Summary): No more leim directory.
* leim/Makefile.in (leimdir): New variable.
(TIT_GB, TIT_BIG5, MISC, changed.tit, changed.misc)
(${leimdir}/leim-list.el, ${leimdir}/ja-dic/ja-dic.el):
Generate in $leimdir.
(all): Remove compilation, add ja-dic.
(leim-list.el): Now PHONY.
(setwins, compile-targets, compile-main, clean, mostlyclean)
(extraclean): Remove.
(bootstrap-clean): Delete all generated files.
* leim/README: Update for moved leim/ directory.
* leim/leim-ext.el (ucs-input-activate, hangul-input-method-activate):
Remove manual autoloads; now in loaddefs.el.
Disable byte-compile, version-control, autoloads in the output.
* lisp/Makefile.in (setwins_for_subdirs): Skip leim/ directory.
(compile-main): Depend on lisp/leim rule.
(leim): New rule.
* lisp/loadup.el: Move leim-list.el to leim/ subdirectory.
* lisp/startup.el (normal-top-level): No more leim directory.
* lisp/international/ja-dic-cnv.el (skkdic-convert):
Disable version-control and autoloads in output files.
* lisp/international/titdic-cnv.el (titdic-convert, miscdic-convert):
Disable version-control and autoloads in output files.
* lisp/leim/quail: Move here from ../leim.
* lisp/leim/quail/hangul.el (hangul-input-method-activate):
Add autoload cookie.
(generated-autoload-load-name): Set file-local value.
* lisp/leim/quail/uni-input.el (ucs-input-activate): Add autoload cookie.
(generated-autoload-load-name): Set file-local value.
* nt/README.W32:
* nt/addpm.c (env_vars):
* nt/epaths.nt (PATH_LOADSEARCH, PATH_DUMPLOADSEARCH):
* nt/paths.h (PATH_LOADSEARCH): No more leim directory.
* src/Makefile.in (leimdir): Now in lisp source directory.
($(leimdir)/leim-list.el): Just use ../leim .
* src/epaths.in (PATH_DUMPLOADSEARCH):
* src/lread.c (load_path_default):
* src/nsterm.m (ns_load_path): No more leim directory.
* .bzrignore: Update for relocated leim files.
(msys_w32prefix_subst): Rename from msys_prefix_subst.
Operate on w32prefixpattern.
(epaths-force-w32): Use build-aux/msys-to-w32.
* build-aux/msys-to-w32: New file.
Ref: http://lists.gnu.org/archive/html/emacs-devel/2013-10/msg00806.html
* autogen: Remove directory. Move update_autogen to admin/.
* autogen.sh: Remove reference to copy_autogen.
* GNUmakefile (configure):
* Makefile.in (bootstrap): Do not try to run copy_autogen.
* config.bat: Use msdos/autogen rather than autogen.
* admin/update_autogen: Move here from ../autogen.
(usage): Update. Remove -l, add -A.
(autogendir): New variable.
(ldefs_flag): Default to set.
(genfiles): Reduce to only ms-dos relevant files.
(main): Make checking autogen sources optional.
Make copying of autogen files optional.
* msdos/autogen/config.in:
* msdos/autogen/Makefile.in: Move here from ../autogen.
* nt/INSTALL: Remove reference to copy_autogen.
* nt/config.nt: Comment.
* Makefile.in (check): Depend on all.
* test/automated/Makefile.in (abs_top_builddir): Remove variable.
(EMACS): Use a relative file name.
(lisp-compile): Remove (assume it's up-to-date).
(compile-main): Do not run lisp-compile.
(check): Use --chdir.
