A separate mkdir rule is not needed, since MKDIR_P is thread-safe.
* Makefile.in (install-arch-dep): Ensure bindir exists.
Drop mkdir dependency.
(install-arch-indep): Ensure docdir, infodir, mandir exist.
(install-leim): Drop mkdir dependency.
(mkdir): Remove most directories, now made in relevant rules.
Remember to always call MKDIR_P and INSTALL_DATA from the top-level
directory, for the case in which we are falling back to build-aux/install-sh.
It would make life much easier if autoconf would use an absolute path
in this case.
* configure.in (etcdir): For a self-contained ns build,
set it to the appropriate values.
* Makefile.in (install-arch-dep): No need to move info/ any more.
* configure.in (ns_self_contained): New output variable.
* Makefile.in (ns_self_contained): New, set by configure.
(install-arch-dep): Use $ns_self_contained.
This is rather than installing it in one place then moving it.
* configure.in (archlibdir): Set it for self-contained ns builds.
(libexecdir): Don't expand it now (this is mainly cosmetic).
* Makefile.in (ns_appbindir, ns_appresdir):
Move them before things that may refer to them.
(install-arch-dep): No need to relocate self-contained ns libexec.
* lib-src/Makefile.in (ns_appbindir): New, set by configure.
* configure.in (AC_PROG_MKDIR_P): Call it, to set MKDIR_P.
(MKDEPDIR): Use $MKDIR_P.
* Makefile.in (MKDIR_P): New, set by configure.
(mkdir): Use $MKDIR_P.
* doc/emacs/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* doc/lispintro/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* doc/lispref/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* doc/misc/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* src/Makefile.in (MKDIR_P): New, set by configure.
* src/ns.mk (${ns_appdir}, ${ns_appbindir}Emacs): Use $MKDIR_P.
./lisp/simpl.ele never exists in the _build_ directory,
the Lisp files are always in the _source_ directory.
Even if they were not, it would be wrong to install just
*.el and *.elc, since there are subdirectories in lisp/.
Ref http://lists.gnu.org/archive/html/emacs-devel/2012-04/msg00354.html
* configure.in (INFO_EXT, INFO_OPTS): New output variables.
* doc/emacs/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(info, infoclean): Use $INFO_EXT.
($(infodir)/emacs$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/emacs/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(INFO_TARGETS): Use $INFO_EXT.
($(infodir)/emacs$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT, and -o.
* doc/lispintro/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(info, infoclean): Use $INFO_EXT.
(${infodir}/eintr$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/lispintro/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(INFO_TARGETS, clean): Use $INFO_EXT.
($(infodir)/eintr$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/lispref/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(info, infoclean): Use $INFO_EXT.
($(infodir)/elisp$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/lispref/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(info, maintainer-clean): Use $INFO_EXT.
($(infodir)/elisp$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/misc/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(INFO_TARGETS): Use $INFO_EXT.
Make all rules generating info files use $INFO_EXT, $INFO_OPT, and -o.
* doc/misc/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(INFO_TARGETS): Use $INFO_EXT.
Make all rules generating info files use $INFO_EXT, $INFO_OPT, and -o.
The sed '/ing directory/d' piece is to remove the annoying
"entering/leaving directory" messages that GNU make insists on
printing when called recursively. --no-print-directory isn't portable.
* Makefile.in (INFO_FILES): Remove variable.
(INFO_NONMISC): New variable.
(install-arch-indep, uninstall): Don't use $INFO_FILES.
* doc/misc/Makefile.in (echo-info): New phony target, used by top-level.
* info/dir (File):
* Makefile.in: Add emacs-gnutls to the info directory and the
INFO_FILES target.
* doc/misc/emacs-gnutls.texi: Add documentation for the GnuTLS integration.
* doc/misc/gnutls.texi: New file to explain the GnuTLS integration.
* doc/misc/Makefile.in: Add gnutls.texi to build.
I have been using this change for many months in my private copy
of Emacs, and have used it to find several bugs. It's mature
enough to publish now.
* Makefile.in (GNULIB_MODULES): Add warnings, manywarnings.
* configure.in: Support --enable-gcc-warnings, in the style of
other GNU packages such as coreutils.
(C_WARNINGS_SWITCH): Remove, replacing with...
(WARN_CFLAGS, GNULIB_WARN_CFLAGS): New variable.
(PKG_CHECK_MODULES, C_SWITCH_X_SITE): Use -isystem rather than -I,
when including system files with GCC.
* etc/NEWS: Mention --enable-gcc-warnings.
* lib/Makefile.am (AM_CFLAGS): New macro.
* m4/manywarnings.m4, m4/warnings.m4: New files, from gnulib.
* lib-src/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(BASE_CFLAGS): Use new macros rather than old.
* lwlib/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(ALL_CFLAGS): Use new macros rather than old.
* oldXMenu/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(ALL_CFLAGS): Use new macros rather than old.
* src/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(ALL_CFLAGS): Use new macros rather than old.
* src/process.c: Ignore -Wstrict-overflow to work around GCC bug 52904.
* src/regex.c: Ignore -Wstrict-overflow. If !emacs, also ignore
-Wunused-but-set-variable, -Wunused-function, -Wunused-macros,
-Wunused-result, -Wunused-variable. This should go away once
the Emacs and Gnulib regex code is merged.
(xmalloc, xrealloc): Now static.
Bug reported by Chong Yidong for SunOS 5.10 Generic_127111-11 sparc.
I cannot reproduce it on SunOS 5.10 Generic_141444-09 sparc but
possibly this is because Sun fixed the 'stat' bug in my version.
* Makefile.in (GNULIB_TOOL_FLAGS): Do not avoid the pathmax module.
* lib/pathmax.h, m4/pathmax.m4: New files, from gnulib.
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
These changes are based on gnulib version
4f11d6bebc3098c64ffde27079ab0d0cecfd0cdc dated 2011-10-07 20:59:10,
because Emacs is in feature freeze and we do not want to merge any
more-recent changes from gnulib.
* src/epaths.in (PATH_LOADSEARCH, PATH_DUMPLOADSEARCH, PATH_EXEC)
(PATH_DATA, PATH_DOC): Update the template values to be closer to
their typical values these days.
* Makefile.in, src/epaths.in: Comments.
* Makefile.in (cache_file, ENABLE_MAINTAINER_MODE, CONFIGUREFLAGS):
New macros.
(config.status, bootstrap): Use them to propagate configure flags
to sub-configures.
* configure.in (cache_file): AC_SUBST this, for Makefile.in.
Do not install arch-dependent files in the app bundle if
--disable-ns-self-contained is requested.
* configure.in (exec_prefix, libexecdir): Define relative to
ns_appbindir' only if configured for a self-contained app.
* Makefile.in (install-arch-dep): Test for the existence of
libexec in the Emacs.app bundle before executing commands.
Fixes: debbugs:1335
This clarifies and fixes some licensing issues raised by Glenn Morris
<http://lists.gnu.org/archive/html/bug-gnulib/2011-09/msg00397.html>.
It also merges the latest version of texinfo.tex and has some
MSVC-related changes that don't affect Emacs.
* Makefile.in (GNULIB_TOOL_FLAGS): Avoid msvc-inval, msvc-nothrow,
pathmax, and raise, since these are needed only to address
MSVC-related issues that Emacs doesn't have.
* doc/misc/texinfo.tex, lib/dup2.c, lib/gnulib.mk, lib/signal.in.h:
* lib/sigprocmask.c, lib/stat.c, lib/stdio.in.h, lib/sys_stat.in.h:
* lib/unistd.in.h, m4/dup2.m4, m4/getloadavg.m4, m4/gl-comp.m4:
* m4/include_next.m4, m4/signal_h.m4, m4/signalblocking.m4:
* m4/stdint.m4, m4/stdio_h.m4, m4/sys_stat_h.m4, m4/time_h.m4:
* m4/unistd_h.m4: Merge from gnulib.
* m4/largefile.m4: New file, so that Emacs does not mess up when
accessing files with large inode numbers in MacOS X 10.5 and later.
* m4/nocrash.m4: New file, to avoid triggering background debugger
and/or create core dumps during 'configure'.
* build-aux/move-if-change: Renamed from move-if-change.
* build-aux/snippet/arg-nonnull.h: Renamed from arg-nonnull.h.
* build-aux/snippet/c++defs.h: Renamed from c++defs.h.
* build-aux/snippet/warn-on-use.h: Renamed from warn-on-use.h.
* build-aux/snippet/_Noreturn.h: New file, for draft C1X _Noreturn.
* .bzrignore: The autogenerated files compile, config.guess,
config.sub, depcomp, install-sh, and missing are now in build-aux.
* Makefile.in (epaths-force, sync-from-gnulib):
move-if-change is now in build-aux.
(GNULIB_TOOL_FLAGS): Avoid threadlib; this is now a prerequisite
of gnulib's pthread_sigmask module, but Emacs doesn't need it.
(mkdir): install-sh is now in build-aux.
* config.bat: c++defs.h is now in build-aux/snippets.
* configure.in: Specify AC_CONFIG_AUX_DIR with build-aux (the
usual parameter).
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
* lib/makefile.w32-in (ARG_NONNULL_H): arg-nonnull.h moved
to build-aux/snippet.
* lib/pthread_sigmask.c, lib/stdlib.in.h, m4/extensions.m4:
* m4/getopt.m4, m4/gnulib-common.m4, m4/pthread_sigmask.m4:
Merge from gnuilib. This fixes porting bugs on Cygwin, Irix, and
Solaris, enables MacOS extensions, and enables nocrash during
'configure'.
* make-dist: Adjust to new build-aux and build-aux/snippit dirs.
* admin/notes/copyright: The files compile, config.guess, config.sub,
depcomp, install-sh, missing, and move-if-change are now in the
new build-aux subdirectory. The files arg-nonnull.h, c++defs.h,
and warn-on-use.h are now in build-aux/snippets. New file
build-aux/snippets/_Noreturn.h.
* leim/Makefile.in (install): install-sh is now in build-aux.
* lib-src/Makefile.in ($(DESTDIR)${archlibdir}): install-sh moved
to build-aux.
* msdos/sedlibmk.inp (CONFIG_CLEAN_VPATH_FILES): Adjust to snippet moves
from top level to build-aux/snippet.
* src/Makefile.in (gl-stamp): move-if-change is now in build-aux.
* Makefile.in (GNULIB_TOOL_FLAGS): Do not avoid sigprocmask.
* configure.in (AC_TYPE_UID_T): New dummy macro.
Configure gnulib after adjusting LIBS,
so that gnulib can assume the libraries in LIBS.
* lib/pthread_sigmask.c, lib/sigprocmask.c, m4/signalblocking.m4:
New files, automatically imported from gnulib.
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
* src/Makefile.in (LIB_PTHREAD_SIGMASK): New macro.
(LIBES): Use it.
* Makefile.in (GNULIB_MODULES): Add pthread_sigmask.
(GNULIB_TOOL_FLAGS): Avoid sigprocmask. Emacs does its own
implementation of 'sigprocmask' on Windows, and it assumes
'sigprocmask' on non-Windows hosts, so it doesn't need the
sigprocmask module.
* lib/signal.in.h, m4/pthread_sigmask.m4, m4/signal_h.m4:
New files, automatically imported from gnulib.
* lib/gnulib.mk, m4/gl-comp.m4: Automatically-imported update
due to the above changes.
* .bzrignore: Add lib/signal.h.
* Makefile.in (GNULIB_MODULES): Add dup2.
* configure.in: Do not check for dup2; gnulib does that now.
* lib/dup2.c, m4/dup2.m4: New files, from gnulib.
* src/sysdep.c (dup2) [!HAVE_DUP2]: Remove; gnulib now does this.
* .bzrignore: Add lib/alloca.h.
* Makefile.in (GNULIB_MODULES): Add alloca-opt.
* configure.in (AC_FUNC_ALLOCA): Remove almost all the alloca stuff,
as gnulib now does that for us. Put alloca check after gl_INIT.
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
* lib/alloca.in.h, m4/alloca.m4: New files, from gnulib.
* configure.in (OPT_MAKEFILES_IN): Remove.
(SUBDIR_MAKEFILES): New variable, passed to AC_CONFIG_FILES.
(SUBDIR_MAKEFILES_IN): New output variable.
* Makefile.in (OPT_MAKEFILES_IN): Remove.
(SUBDIR_MAKEFILES_IN): Let configure set it.
* configure.in (OPT_MAKEFILES_IN): Remove.
(SUBDIR_MAKEFILES): New variable, passed to AC_CONFIG_FILES.
(SUBDIR_MAKEFILES_IN): New output variable.
* Makefile.in (OPT_MAKEFILES_IN): Remove.
(SUBDIR_MAKEFILES_IN): Let configure set it.
* make-dist: Don't distribute test/.
* configure.in (OPT_MAKEFILES_IN): New output variable.
(AC_CONFIG_FILES): Conditionally include test/automated/Makefile.
* Makefile.in (OPT_MAKEFILES_IN): New, set by configure.
(SUBDIR_MAKEFILES_IN): Use $OPT_MAKEFILES_IN.
(check): Give an explicit error if test/ is not present.
fakemail: Remove dependency on ignore-value.
* Makefile.in (GNULIB_MODULES): Add stdio.
* lib/stdio.in.h, m4/stdio_h.m4: New files, automatically
imported from gnulib.
[lib-src/ChangeLog]
fakemail: Remove dependency on ignore-value.
This undoes some of the recent fakemail-related changes.
It is made possible due to recent changes to gnulib's stdio module.
* Makefile.in (fakemail${EXEEXT}): Do not depend on ignore-value.h.
* fakemail.c: Do not include ignore-value.h.
(put_line): Do not use ignore_value.
Work around some portability problems with symlinks.
* Makefile.in (GNULIB_MODULES): Add lstat, readlink, symlink.
* configure.in (lstat, HAVE_LSTAT): Remove special hack.
* lib/lstat.c, lib/readlink.c, lib/stat.c, lib/symlink.c:
* m4/dos.m4, m4/lstat.m4, m4/readlink.m4, m4/stat.m4, m4/symlink.m4:
New files, automatically generated from gnulib.
* aclocal.m4, configure, lib/Makefile.in, lib/gnulib.mk:
* lib/stdlib.in.h, m4/gl-comp.m4, m4/stdlib_h.m4: Regenerate.
2011-02-22 Paul Eggert <eggert@cs.ucla.edu>
[src/ChangeLog]
Work around some portability problems with symlinks.
* fileio.c (Frename_file, Fmake_symbolic_link, Ffile_symlink_p):
Simplify the code by assuming that the readlink and symlink calls
exist, even if they always fail on this host.
(Ffile_readable_p): Likewise, for fifos.
* config.in: Regenerate.
* Makefile.in (MAKEFILE_MODULES): Add crypto/md5.
* admin/notes/copyright: Remove src/md5.c and src/md5.h as
special cases.
* src/Makefile.in (base_obj): Remove md5.o, since this file
is in lib now.
* src/deps.mk (md5.o): Remove.
* aclocal.m4, configure, lib/Makefile.in, lib/gnulib.mk, m4/gl-comp.m4:
Regenerate.
* lib/md5.c: Regenerate. This renames the file from src/md5.c,
and adds some porting improvements from gnulib.
* lib/md5.h: Regenerate, likwise; rename from src/md5.h.
* m4/md5.m4: New file, from gnulib.
2011-02-18 Paul Eggert <eggert@cs.ucla.edu>
* Makefile.in (DOS_gnulib_comp.m4): Renamed from DOS-gnulib-comp.m4,
for portability to POSIX make. Reported by Bruno Haible.
(sync-from-gnulib): Copy gl-comp.m4 (if present) back to
gnulib-comp.m4 before running gnulib-tool, to prevent old gnulib
files from accumulating as garbage. Also reported by Bruno Haible.
This way, we don't have to assume that the maintainer has
the automake package installed. See
<http://lists.gnu.org/archive/html/emacs-devel/2011-01/msg00746.html>.
* .bzrignore: Remove aclocal.m4, undoing the previous change.
* Makefile.in (top_maintainer_clean): Do not remove aclocal.m4,
undoing the previous change.
* aclocal.m4: New file (actually, resurrected).
* Makefile.in (am--refresh): Mark as .PHONY.
(top_maintainer_clean): Don't remove lib/gnulib.mk m4/gnulib-cache.m4,
as they're not rebuilt unless you do a "make sync-from-gnulib"
and the former is needed for "configure".
(maintainer-clean): Don't recurse into lib, as "make bootstrap-clean"
has already removed lib/Makefile.
* Makefile.in, configure.in, doc/misc/Makefile.in, doc/misc/makefile.w32-in:
Add ERT. Make "make check" run tests in test/automated.
* doc/misc/ert.texi, lisp/emacs-lisp/ert.el, lisp/emacs-lisp/ert-x.el:
New files.
* test/automated: New directory.
* configure.in (HAVE_MAKEINFO): New output variable.
(MAKEINFO): Reset to "makeinfo" if not found.
* Makefile.in (install-arch-indep, info):
Replace MAKEINFO = off with HAVE_MAKEINFO = no.
* configure.in (--without-compress-info): New option.
(GZIP_INFO): New output variable.
* Makefile.in (GZIP_INFO): New, set by configure.
(install-arch-indep): Don't gzip info pages if GZIP_INFO is nil.
Handle man pages in the same way.
* etc/NEWS: Re-order installation section, and add new item.
* Makefile.in (install-arch-indep): Remove references to RCS, CVS,
and other files that no longer exist.
* leim/Makefile.in (install): Remove references to CVS-related files.
* lisp/Makefile.in (setwins, setwins_almost, setwins_for_subdirs):
Remove references to CVS, RCS and Old directories.
* src/Makefile.in (${ns_appdir}): Remove references to CVS-related files.
* Makefile.in (C_SWITCH_SYSTEM): Use @C_SWITCH_SYSTEM@ rather than
@c_switch_system@.
* oldXMenu/Makefile.in (C_SWITCH_SYSTEM, C_SWITCH_MACHINE): Use
@C_SWITCH_SYSTEM@, @C_SWITCH_MACHINE@ rather than
@c_switch_system@, @c_switch_machine@.
site-lisp and infodir. There may be non-Emacs files in here, and the
files supplied by Emacs are all handled explicitly already. (Bug#3800)
(mkdir): Set umask to world-readable before creating directories.
mkinstalldirs already checks if dirs exist, don't duplicate this test.
make it depend on all other */.in files.
(src/Makefile, src/config.stamp, lib-src/Makefile)
(doc/emacs/Makefile, doc/misc/Makefile, doc/lispref/Makefile)
(doc/lispintro/Makefile, oldXMenu/Makefile, lwlib/Makefile)
(leim/Makefile, lisp/Makefile): Remove those overlapping targets.
(leim, ${SUBDIR}, blessmail): Only depend on Makefile now.
* configure.in: Don't create src/config.stamp any more.
* Makefile.in (${lisp} ${SOME_MACHINE_LISP}, ../lisp/loaddefs.el):
Use $(BOOTSTRAPEMACS) rather than witness-emacs.
(bootstrap-emacs${EXEEXT}): Merge witness-emacs into it.
(witness-emacs): Remove.
(lisp, shortlisp): Move loaddefs.el earlier.
(mostlyclean): Forget about witness-emacs.
* Makefile.in (COMPILE_FIRST): Trim down and add autoload.el.
* src/Makefile.in (emacs${EXEEXT}): Link the new emacs to bootstrap-emacs.
(bootstrapclean): Remove.
(.el.elc): New rule.
(PRECOMP): New var.
(../lisp/subdirs.el): Remove.
(bootstrap-emacs${EXEEXT}): Remove subdirs.el and charpro.el dependency.
(witness-emacs): New target.
(mostlyclean): Remove witness-emacs as well.
(../lisp/loaddefs.el, ${lisp} ${SOME_MACHINE_LISP}):
Add witness-emacs dependency.
* lisp/loadup.el: Don't add emacs-<VERS> name when bootstrapping.
* lisp/Makefile.in (emacs-deps): Remove.
($(lisp)/cus-load.el, $(lisp)/finder-inf.el): Re-add.
(all): Use them.
(autogen-clean): Remove.
* Makefile.in (maybe_bootstrap, src/bootstrap-emacs${EXEEXT})
(bootstrap-build): Remove.
(top_bootclean): New var.
(top_distclean, bootstrap-clean): Use it.
(bootstrap): Don't recheck config. Make normally.
(bootstrap-clean): New target that keeps TAGS around.
(../lisp/subdirs.el, ../lisp/loaddefs.el): New targets.
(bootstrap-emacs${EXEEXT}): Depend on subdirs.el.
* lisp/Makefile.in (all): New target.
(bootstrap-prepare): Remove.
* Makefile.in (SUBDIR): Include `lisp'.
(lisp): Depend on `src'.
(top_distclean): Don't remove config.status.
(bootstrap-clean): New target.
(maintainer-clean): Use it.
(bootstrap): Use bootstrap-clean. Re-run config.status.
(src/bootstrap-emacs${EXEEXT}): New target.
(bootstrap-build): Use it. Don't use bootstrap-prepare because
src/Makefile now takes care of it.
(bootfast, bootstrap-clean-before, bootstrap-clean-before-fast): Remove.
(install-arch-indep): Without makeinfo, ignore any missing manuals.
(info-real): New target.
(info): Without makeinfo, do nothing, else call `info-real'.
(SUBDIR_MAKEFILES): Update for new doc/ directory layout.
(man/Makefile, lispref/Makefile, lispintro/Makefile): Rename and
update these targets for new doc/ directory layout.
(doc/misc/Makefile): New target.
(install-arch-indep): Use mansrcdir for new location of manpages.
(mostlyclean, clean, distclean, maintainer-clean, unlock)
(relock, info, dvi): Update targets for new doc/ directory layout.
(install-arch-indep, uninstall): Use $(INFO_FILES) to specify files to be
installed/uninstalled.
(uninstall): Invoke "$(INSTALL_INFO) --remove" to remove references to Info
files installed by Emacs.
