servers, CCs, BCCs, HTML messages, and word wrap, and more. It can
send email via sendmail, PHP mail(), or with SMTP. Methods are based
on the popular AspEmail active server component.
WWW: http://sourceforge.net/projects/phpmailer
PR: ports/135071
Submitted by: Joe Horn <joehorn@gmail.com>
to link with CUPS, but it should now be possible to `make config'
and disable any link options that refer to CUPS libraries.
Approved by: doceng (hrs)
Noticed by: Stefan Thurner thurners at nicsys.de
Guido Falsi mad at madpilot.net [1],
Helge Oldach ports-ghostscript8-may09 at oldach.net [1]
[1] An almost identical patch was submitted to doceng.
programming and boundary-scan testing for embedded target devices. OpenOCD uses
a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1)
compliant taps on your target board. OpenOCD currently supports many types
of hardware dongles: USB based, parallel port based, and other standalone boxes
that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t),
ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and
Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged
via the GDB protocol. Flash writing is supported for external CFI compatible
NOR flashes (Intel and AMD/Spansion command set) and several internal flashes
(LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for
various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is
included.
WWW: http://openocd.berlios.de/
PR: 135094
Submitted by: CeDeROM <tomek.cedro@gmail.com>
continuous speech recognition (LVCSR) decoder software for
speech-related researchers and developers. Based on word N-gram and
triphone context-dependent HMM, it can perform almost real-time
decoding on most current PCs with small amount of memory.
WWW: http://julius.sourceforge.jp/en_index.php
PR: 135153
Submitted by: Simun Mikecin <numisemis@yahoo.com>
which is still not ported to the new usb stack yet. (qemu could really
use some help here, the author of the old usb host code is busy with
other stuff now...)
- No PORTREVISION bump since this is a build fix.
Those ports are intended to be used with 8-CURRENT at least
with SVN r192206.
If you want to switch to linux-f10 ports, please define at /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=f10
OVERRIDE_LINUX_NONBASE_PORTS=f10
An upgrading procedure is shown at /usr/ports/UPDATING, entries 20090401
and 20070327.
For the first time all tested linux ports work as expected(!):
. acroread8;
. google-earth;
. skype;
. seamonkey.
Many thanks for kernel folks who really did the main work
(and I wrote only some lines of ports).
There is a good chance that those ports may become a default
for 8.0-RELEASE. Please, test and report back to emulation@ ML.
