Two distfiles (ccx_1.6.src.tar.bz2 cgx_1.6.all.tar.bz2)
are rerolled without changing filename.
Changes in ccx_1.6.src.tar.bz2
According to ccx_1.6/src/LOG-BOOK:
> 22 Feb 2006 - corrected an error in mafillsm.f
> 25 Feb 2006 - made a change in map3dto1d2d.f, arpack.c and arpackcs.c
> (rotational speed needed for stiffness matrix in
> frequency calculations)
Changes in cgx_1.6.all.tar.bz2
All are just minor fixes.
Spotted by: kris
'hostname nor servname provided, or not known', thus hopefully fix the
build of french/aster, which calls astk-serveur during its post-config.
Reported by: pointyhat via Kris
a graphical waveform viewer and a source level debugger. It also aims at
VHDL-93 compliancy. The project is at a very early development stage.
WWW: http://www.freehdl.seul.org/
PR: ports/104634
Submitted by: lon_kamikaze at gmx.de
- various manual updates
- update the INSTALL documentation
- fix a bug where pins turned into pure holes when an element
was smashed.
- use locale-independent strtod and dtostr functions to avoid problems
loading files saved in some locales.
- fixed various bugs which caused pcb to crash
- update the gtk status line after save/save as
- make the gerber file names be compatible with pre-HID versions
- split plated and unplated drill output
- fix various typos in menus and comments
- add a batch mode HID.
- fix drawing of box around text in the buffer
- various fixes and improvements to the trace optimizer and the
autorouter
- fix board flipping code
- fix rounding bug when creating list of drill sizes
- add support for > 8 copper layers
- avoid strict aliasing violations encountered with gcc4
- refactor code related to handling the filenames in the export
HID's
- fix layer group parsing code
- add the ability to user-configure mouse actions in the lesstif GUI.
- enable loaded netlists by default
- improve the positioning of the drill list in the postscript output
- various improvements to the configure script to improve robustness
and improve error messages when thing don't go well.
- add IPC style footprints for 01005 passives.
- added a Renumber() action which will renumber all reference designators
and produced an annotation file for backannotating to schematics.
- Draw via annulii on assembly drawings
- various other bug fixes and improvements.
many forms of circuit design, including:
- Custom IC layout (ASICs)
- Schematic drawing
- Hardware description language specifications
Author: Static Free Software & Sun Microsystems, Inc.
WWW: http://www.staticfreesoft.com/
PR: ports/100355
Submitted by: me (stas)
Approved by: sem (mentor)
simulation engines: GNU-Cap and Ng-Spice.
Current features:
Import gschem schematic files using gentlist.
Load and parse circuit description (net list) files.
Provides a GUI interface for GNU-Cap OP, DC, AC and Transient
analyses and generates appropriate simulator commands
based on user input.
Provides a GUI interface for Ng-Spice DC, AC and Transient
analyses and generates appropriate simulator commands
based on user input.
The raw output may be viewed for any processes initiated by gspiceui.
Formatting of simulator output so that it may be plotted using gwave.
WWW: http://www.geda.seul.org/tools/gspiceui/index.html
PR: ports/99357
Submitted by: Stanislav Sedov <ssedov at mbsd.msk.ru>
specified in high-level description language into ready-to-compile c code for
the API of spice simulators.
WWW: http://mot-adms.sourceforge.net/
PR: ports/101014
Submitted by: Stanislav Sedov <ssedov at mbsd.msk.ru>
working with superconducting Josephson junction circuits, yet the program
has the flexibility and power to meet the needs of other technologies.
Jspice3 is an adaptation of the Berkeley Spice3f4 program, with added
features. One added feature is a built-in graphical input front end for
schematic capture. While displayed, simulations can be run and data
plotted through this graphical interface.
While not as powerful or as pretty as the Xic graphical interface, it
holds its own in functionality.
A significantly enhanced output plotting capability is provided, and
Jspice3 has enhanced script interpretation capability.
WWW: http://www.wrcad.com/jspice3.html
PR: ports/93958
Submitted by: Pedro F. Giffuni
Pedro can't maintain this port anymore and Stanislav Sedov agree to maintiant it.
** 20060414
- This is the first snapshot of the new HID version of PCB. HID, which
stands for Human Interface Device is the abstraction created by
DJ Delorie which seperates the core PCB code from the graphical user
interface. In this release, two GUI HID's are supported, gtk and lesstif.
In addition, there are HID exporters for postscript and encapsulated
postscript, RS-274-X (gerber), bill of materials, centroid file, and
png/gif/jpeg. This represents a major restructuring of the code and
many months of work.
- PCB's actions (the commands which drive the core of the program and
may be directly accessed by the user) now have the documentation in-line
in the code and the actions reference section of the manual is
extracted from the in-line documentation. The goal it to provide more
complete and accurate documentation. As always the manual is still
a work in progress but it is getting more complete and up to date.
- Fixed a long standing segfault when saving connection data
- Fixed a DRC bug
- Fix some rounding issues when setting sizes. Hopefully this will address
the issue with 23.99 mil drills and related problems.
- The html manual is now in one file instead of many files
- The lesstif HID now supports loading of background images to help
recover a layout which may exist in hardcopy form only.
** 20060321
- Add internal support for more than 8 layers. By default PCB is still
compiled for 8 copper layers.
- Fixed several minor bugs in the GTK user interface including fixing
scrolling of the log window, fixed up some of the DRC reporting
and mm/mil units.
- Fixed several key bindings.
- Updated refcard.tex to reflect the current set of key bindings.
- Fixed some minor bugs which caused compilation problems on some
systems.
- Converted the QFN footprints to hi-res.
- Added documentation to the manual for the centroid file format and
the algorithm used for finding the centroid and rotation.
- Fixed a bug so that the initial layer named 'component' is actually
on the component side of the board and 'solder' is actually on the
solder side of the board.
- Fixed the pin order in the bourns trim pots (~bourns library)
- Added actions and a script to allow command line printing.
- Added IPC-7351 recommended footprints for 0201, 0402, etc passives.
- Fixed SME5 package.
- Fixed a bug which prevented disabling nets from the ratsnest
- Fixed a bug where clearances could be set 1 below the spacing
- Fixed clearline flag so that arcs also have this property.
- Speed up rtree searches and other autorouter speedups.
- Fixed a bug in computation of the closest polygon point.
- Use rtrees for polygon handling for speed improvements.
- Add a ChangePinName() action.
- Fix a bug which caused duplicate rats names when manually adding
rats lines.
- Added DRC checks for minimum drill diameter and minimum annular ring.
- Add a minimal glossary to the manual
- Fix the author name in the fab drawing
- Cause the crosshair to snap to pad ends instead of center for rat
drawing.
- Add "join" to SetFlag, ClrFlag and ChangeFlag.
- Added inline documentation for the pcb file syntax. The manual now
is up to date and correctly documents the file format. In addition
the inline documentation will make it much easier to maintain the
documentation.
- Remove some broken m4lib footprints
- Put the correct setting for the gschem footprint= attribute in []
in the library window for the m4 libraries.
Submitted by: Stanislav Sedov (ssedov at mbsd dot msk dot ru)
PR: ports/99942
This release has several notable enhancements, including the
addition of a new example geometry model of a toy vehicle. The DXF
converter received considerable attention with the addition of
support for most of the formerly unsupported 2D entities. Several
bugs were identified and fixed in mged, g2asc, g_diff, and asc-nmg.
Documentation was improved for dbupgrade and dxf-g, and a new g-var
tool was created to facilitate conversion of models for purposes
directly related to OpenGL display lists. Finally, the new archer
modeling tool received support for multi-select and cut-n-paste.
PR: ports/99819
Submitted by: maintainer
1) gTAG - USB to JTAG interface
2) lightning_detector - a lightning detector
3) RF_Amp - schematics and associated materials for a SPICE model
4) TwoStageAmp - a two stage amplifier SPICE playpen
WWW: http://www.geda.seul.org
PR: ports/99564
Submitted by: Stanislav Sedov <ssedov@mbsd.msk.ru>
the Tcl/Tk scripting language. The project is open-source (BSD license)
and based upon the NG-Spice source code base with many improvements
Features and Improvements
- Fully Tcl scriptable - installs with 'package require spice' statement
- Hspice syntax (SpicePP).
- GUI interfaces, various (Tk).
- SpiceWish (BLT graph widget)
- BLT (tcl compatible) vectors for storage, manipulation and arithmetic
upon Spice waveforms.
- Xspice additions (Georgia Tech).
- Trigger upon waveform events.
- Spice 'simulator state' save and restore for rapid 'what-if' simulations
(no longer need to re-simulate from the beginning each time a
device value is changed).
Author: Stefan Jones <stefan.jones@multigig.com>
WWW: http://tclspice.sourceforge.net/
PR: ports/99399
Submitted by: Stanislav Sedov <ssedov@mbsd.msk.ru>
Those spaces used to hinder searching for the corresponding files
with portsearch -f '/FILENAME$' for obvious reasons.
Although currently portsearch removes those spaces itself remove
them anyway.
Inspired by: ports/94078
Approved by: portmgr (during freeze: krion, then kris advised to wait; at present: erwin)
This is a FEA program used in a classic FEM book. A complete (commercial)
version is available here:
<http://www.ce.berkeley.edu/~rlt/feap/>
The "personal version" is very limited, but it keeps the same format as
the complete (commercial) version and cad/netgen can produce files for it.
PR: ports/95210
Submitted by: Pedro F. Giffuni <giffunip (at) asme.org>
- Add an entry in ports/LEGAL;
- Clean up the port;
- Make pkg-descr look pretty and make some sligth adjustments to pkg-plist.
PR: 93879
Submitted by: Daniel Thiele <dthiele (at) gmx.net> (maintainer)
partitioning, static mapping, and sparse matrix block ordering.
Its purpose of Scotch is to apply graph theory, with a divide and conquer
approach, to scientific computing problems such as graph and mesh partitioning,
static mapping, and sparse matrix ordering, in application domains ranging from
structural mechanics to operating systems or bio-chemistry.
Note: there is an older tarball included in Aster's distfile, but I prefer
a separate distfile from the official site.
- Shared lib version and PORTREVISION bumb for all affected ports.
While I'm here:
- Remove USE_MESA knob where it was (35 ports).
It marked as depricated for 2 years.
PR: ports/90247
Submitted by: Ermal Lu?i <eri--@albabsd.org>
When I ported this I added amd64 to give the "benefit of
doubt" however I had the chance top test it but it doesn't
work, it coredumps.
PR: ports/91188
Submitted by: Pedro F. Giffuni <giffunip@asme.org>
Another version upgrade. The amd64 problem has been fixed,
both as a patch here and in the HEAD of the sf.net repository.
This has only been tested on 6.0/ia32 and 6.0/amd64, my 7
box is down and I don't have 4 or 5 anymore. :/
PR: ports/91037
Submitted by: Erik Greenwald <erik@smluc.org>
GPL Cver is a full 1995 P1364 Verilog standard HDL simulator.
It also implements some of the 2001 P1364 standard features
including all three PLI interfaces (tf_, acc_ and vpi_) as
defined in the 2001 Language Reference Manual (LRM).
Verilog is the name for both a language for describing
electronic hardware called a hardware description language
(HDL) and the name of the program that simulates HDL circuit
descriptions to verify that described circuits will function
correctly when the are constructed. Verilog is used only
for describing digital logic circuits. Other HDLs such as
Spice are used for describing analog circuits. There is an
IEEE standard named P1364 that standardizes the Verilog HDL
and the behavior of Verilog simulators. Verilog is officially
defined in the IEEE P1364 Language Reference Manual (LRM)
that can be purchased from IEEE. There are many good books
for learning that teach the Verilog HDL and/or that teach
digital circuit design using Verilog.
WWW: http://www.pragmatic-c.com/gpl-cver/
PR: ports/80968
Submitted by: Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
- Update to 27
- Use a static pkg-plist
- Pass maintainership to submitter
PR: ports/90818
Submitted by: Soeren Straarup <xride@x12.dk>
Submitted by: pointyhat (kris)
Pointy hat to: garga
diagrams and printed circuit board artwork.
Kicad is a set of four softwares and a project manager:
* Eeschema: Schematic entry.
* Pcbnew: Board editor.
* Gerbview: GERBER viewer (photoplotter documents).
* Cvpcb: footprint selector for components used in the circuit design.
* Kicad: project manager.
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
- Use DATADIR=${JAVASHAREDIR}/${PORTNAME} [1]
- Add 'java' category
- Use INSTALL_DATA rather than CP
- Use %%DATADIR%% in launcher scripts (already included in SUB_LIST by
bsd.port.mk)
- Pass JAVA_VERSION to javavmwrapper in launcher scripts
PR: 83979 [1]
Submitted by: Pedro F. Giffuni <giffunip@asme.org> [1]
the the cad/linux-gid port, but it doesn't adds a dependency to linux-gid,
since tochnog can be used standalone.
The right thing to do would be to add a slave port which installs the
plugins only. The slave port would have to depend upon linux-gid and
tochnog.
Since the linux-gid port installs now in X11BASE and tochnog installs in
LOCALBASE, we have a plist problem ATM too.
In light of the recent discussion about the right base directory for ports
which use X11 bits I decided to go the quick route until everything is
decided:
- move linux-gid back to LOCALBASE
- let tochnog still install the plugins
This reverts back to the status quo (a working tochnog/linux-gid). Someone
with a good asbestos suite may want to mark the tochnog port BROKEN.
Dependencies explained by: pfgshield-freebsd@yahoo.com
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.decracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.orgriggs@rrr.deUdo.Schweigert@Siemens.com
- The GUI is now based on gtk2 instead of Xaw
- Flags are stored symbolically in the .pcb file.
- As part of the switch to gtk2, the user customizable menu feature has
been temporarily broken. Hopefully this will be fixed by the next
snapshot. In addition, the loading of background images has also been
temporarily broken.
Submitted by: des
- install wrapper script in a plist safe way
- Mark IGNORE on platforms != i386 (dumps core)
PR: ports/78686
Approved by: portmgr (marcus), arved (mentor)
Perdo F. Giffuni (maintainer)
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX=<value> specifies a dependency upon
emulators/linux_base-<value>, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portrevision of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas <scirocco@tasam.com> [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
