1) gTAG - USB to JTAG interface
2) lightning_detector - a lightning detector
3) RF_Amp - schematics and associated materials for a SPICE model
4) TwoStageAmp - a two stage amplifier SPICE playpen
WWW: http://www.geda.seul.org
PR: ports/99564
Submitted by: Stanislav Sedov <ssedov@mbsd.msk.ru>
the Tcl/Tk scripting language. The project is open-source (BSD license)
and based upon the NG-Spice source code base with many improvements
Features and Improvements
- Fully Tcl scriptable - installs with 'package require spice' statement
- Hspice syntax (SpicePP).
- GUI interfaces, various (Tk).
- SpiceWish (BLT graph widget)
- BLT (tcl compatible) vectors for storage, manipulation and arithmetic
upon Spice waveforms.
- Xspice additions (Georgia Tech).
- Trigger upon waveform events.
- Spice 'simulator state' save and restore for rapid 'what-if' simulations
(no longer need to re-simulate from the beginning each time a
device value is changed).
Author: Stefan Jones <stefan.jones@multigig.com>
WWW: http://tclspice.sourceforge.net/
PR: ports/99399
Submitted by: Stanislav Sedov <ssedov@mbsd.msk.ru>
Those spaces used to hinder searching for the corresponding files
with portsearch -f '/FILENAME$' for obvious reasons.
Although currently portsearch removes those spaces itself remove
them anyway.
Inspired by: ports/94078
Approved by: portmgr (during freeze: krion, then kris advised to wait; at present: erwin)
This is a FEA program used in a classic FEM book. A complete (commercial)
version is available here:
<http://www.ce.berkeley.edu/~rlt/feap/>
The "personal version" is very limited, but it keeps the same format as
the complete (commercial) version and cad/netgen can produce files for it.
PR: ports/95210
Submitted by: Pedro F. Giffuni <giffunip (at) asme.org>
- Add an entry in ports/LEGAL;
- Clean up the port;
- Make pkg-descr look pretty and make some sligth adjustments to pkg-plist.
PR: 93879
Submitted by: Daniel Thiele <dthiele (at) gmx.net> (maintainer)
partitioning, static mapping, and sparse matrix block ordering.
Its purpose of Scotch is to apply graph theory, with a divide and conquer
approach, to scientific computing problems such as graph and mesh partitioning,
static mapping, and sparse matrix ordering, in application domains ranging from
structural mechanics to operating systems or bio-chemistry.
Note: there is an older tarball included in Aster's distfile, but I prefer
a separate distfile from the official site.
- Shared lib version and PORTREVISION bumb for all affected ports.
While I'm here:
- Remove USE_MESA knob where it was (35 ports).
It marked as depricated for 2 years.
PR: ports/90247
Submitted by: Ermal Lu?i <eri--@albabsd.org>
When I ported this I added amd64 to give the "benefit of
doubt" however I had the chance top test it but it doesn't
work, it coredumps.
PR: ports/91188
Submitted by: Pedro F. Giffuni <giffunip@asme.org>
Another version upgrade. The amd64 problem has been fixed,
both as a patch here and in the HEAD of the sf.net repository.
This has only been tested on 6.0/ia32 and 6.0/amd64, my 7
box is down and I don't have 4 or 5 anymore. :/
PR: ports/91037
Submitted by: Erik Greenwald <erik@smluc.org>
GPL Cver is a full 1995 P1364 Verilog standard HDL simulator.
It also implements some of the 2001 P1364 standard features
including all three PLI interfaces (tf_, acc_ and vpi_) as
defined in the 2001 Language Reference Manual (LRM).
Verilog is the name for both a language for describing
electronic hardware called a hardware description language
(HDL) and the name of the program that simulates HDL circuit
descriptions to verify that described circuits will function
correctly when the are constructed. Verilog is used only
for describing digital logic circuits. Other HDLs such as
Spice are used for describing analog circuits. There is an
IEEE standard named P1364 that standardizes the Verilog HDL
and the behavior of Verilog simulators. Verilog is officially
defined in the IEEE P1364 Language Reference Manual (LRM)
that can be purchased from IEEE. There are many good books
for learning that teach the Verilog HDL and/or that teach
digital circuit design using Verilog.
WWW: http://www.pragmatic-c.com/gpl-cver/
PR: ports/80968
Submitted by: Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
- Update to 27
- Use a static pkg-plist
- Pass maintainership to submitter
PR: ports/90818
Submitted by: Soeren Straarup <xride@x12.dk>
Submitted by: pointyhat (kris)
Pointy hat to: garga
diagrams and printed circuit board artwork.
Kicad is a set of four softwares and a project manager:
* Eeschema: Schematic entry.
* Pcbnew: Board editor.
* Gerbview: GERBER viewer (photoplotter documents).
* Cvpcb: footprint selector for components used in the circuit design.
* Kicad: project manager.
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
- Use DATADIR=${JAVASHAREDIR}/${PORTNAME} [1]
- Add 'java' category
- Use INSTALL_DATA rather than CP
- Use %%DATADIR%% in launcher scripts (already included in SUB_LIST by
bsd.port.mk)
- Pass JAVA_VERSION to javavmwrapper in launcher scripts
PR: 83979 [1]
Submitted by: Pedro F. Giffuni <giffunip@asme.org> [1]
the the cad/linux-gid port, but it doesn't adds a dependency to linux-gid,
since tochnog can be used standalone.
The right thing to do would be to add a slave port which installs the
plugins only. The slave port would have to depend upon linux-gid and
tochnog.
Since the linux-gid port installs now in X11BASE and tochnog installs in
LOCALBASE, we have a plist problem ATM too.
In light of the recent discussion about the right base directory for ports
which use X11 bits I decided to go the quick route until everything is
decided:
- move linux-gid back to LOCALBASE
- let tochnog still install the plugins
This reverts back to the status quo (a working tochnog/linux-gid). Someone
with a good asbestos suite may want to mark the tochnog port BROKEN.
Dependencies explained by: pfgshield-freebsd@yahoo.com
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.decracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.orgriggs@rrr.deUdo.Schweigert@Siemens.com
- The GUI is now based on gtk2 instead of Xaw
- Flags are stored symbolically in the .pcb file.
- As part of the switch to gtk2, the user customizable menu feature has
been temporarily broken. Hopefully this will be fixed by the next
snapshot. In addition, the loading of background images has also been
temporarily broken.
Submitted by: des
- install wrapper script in a plist safe way
- Mark IGNORE on platforms != i386 (dumps core)
PR: ports/78686
Approved by: portmgr (marcus), arved (mentor)
Perdo F. Giffuni (maintainer)
