the the cad/linux-gid port, but it doesn't adds a dependency to linux-gid,
since tochnog can be used standalone.
The right thing to do would be to add a slave port which installs the
plugins only. The slave port would have to depend upon linux-gid and
tochnog.
Since the linux-gid port installs now in X11BASE and tochnog installs in
LOCALBASE, we have a plist problem ATM too.
In light of the recent discussion about the right base directory for ports
which use X11 bits I decided to go the quick route until everything is
decided:
- move linux-gid back to LOCALBASE
- let tochnog still install the plugins
This reverts back to the status quo (a working tochnog/linux-gid). Someone
with a good asbestos suite may want to mark the tochnog port BROKEN.
Dependencies explained by: pfgshield-freebsd@yahoo.com
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.decracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.orgriggs@rrr.deUdo.Schweigert@Siemens.com
- The GUI is now based on gtk2 instead of Xaw
- Flags are stored symbolically in the .pcb file.
- As part of the switch to gtk2, the user customizable menu feature has
been temporarily broken. Hopefully this will be fixed by the next
snapshot. In addition, the loading of background images has also been
temporarily broken.
Submitted by: des
- install wrapper script in a plist safe way
- Mark IGNORE on platforms != i386 (dumps core)
PR: ports/78686
Approved by: portmgr (marcus), arved (mentor)
Perdo F. Giffuni (maintainer)
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX=<value> specifies a dependency upon
emulators/linux_base-<value>, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portrevision of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas <scirocco@tasam.com> [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
deskutils/drivel is the only port that has pkg-plist change, so bump the
PORTREVISION. The rest else should be no function change, but just remove the
patches to allow gnomehack takes care of it. Keep in mind, I only touch those
ports that already have gnomehack.
Reviewed by: pav and marcus
since the documentation was written. Fix the port so that it emits
an error message rather than getting a segmentation violation if the
old syntax is used.
portable libraries for VLSI design. It includes a VHDL compiler
and simulator, logic synthesis tools, automatic place and route
tools, and portable CMOS libraries.
Approved by: linimon (mentor)
- GUI support with GTK and GTKGLExt
- New triangulation routine
- Interactive refinement of mesh
- Importing DXF files natively
- Eigensolver for Wave Equation type problems
Minor port cleanup.
PR: 65471
Submitted by: Sarod Yatawatta (maintainer)
Approved by: linimon (mentor)
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
See http://www.ribbonsoft.com/qcad_doc_changelog.html for changes
can save ACAD R12 .DXF Files now
- Finish elimination of PORTREVISION (Many thanks to Tilman Linneweh)
- Add interim patch for compilation
- Change MAINTAINER to my address to faster getting future errlogs
Submitted by: Tilman Linneweh <arved@FreeBSD.org> (part.)
ftp://icarus.com/pub/eda/verilog/snapshots/verilog-20031202.txt:
Combination 64bit/32bit runtime support now works fully on AMD64
systems; wait on lists of named events now works; there is no
longer a common iverilog.conf, instead there are target specific
foo.conf files with a new and cleaner format; 64bit values are more
portably handled; several synthesis bugs related to the control inputs
of flip-flops have been fixed.
Committer is marking this BROKEN on 4.x while we investigate install
problems. It works on 5.x only for now.
PR: ports/60162
Submitted by: Joachim Strombergson <watchman@ludd.luth.se> (maintainer)
- french/eficas from 1.4 to 1.5;
- cad/metis-edf from 3 to 3.1;
- cad/astk-serveur & cad/astk-client from 1.0.14 to 1.0.21;
- french/homard from 5.5 to 6.2;
. don't install Homard automatically with Aster; like Gibi, Homard
depends on french/aster: this is more compliant with the licenses,
and it will be possible to build packages for Aster.
PR: 59312 59881
Submitted By: Thierry Thomas <thierry@pompo.net>
- minor update to 2.0.1.2
- add dependancy to bash (needed by build process)
- use {SH} instead of hardcoded sh
- delete repo copied but not used cad/qcad2
Approved by: marcus (re)
- Add LOCALBASE to path to allow building with gcc from ports
PR: ports/58867, ports/59140
Submitted by: Fritz Heinrichmeyer <Fritz.Heinrichmeyer@FernUni-Hagen.de>
DoubleF <doublef@tele-kom.ru>
Approved by: adamw (mentor)
- Use EXAMPLESDIR/DATADIR macros in pkg-plist
- Give maintainership to Joachim Stroembergson <watchman@ludd.luth.se>
While I'm here:
- Always install examples (i.e. NOPORTDOCS is for docs)
PR: 58300
Submitted by: Clement Laforet <sheepkiller@cultdeadsheep.org>
for gcc3.3, 10 months of updates are included:
- Rework expression parsing and elaboration to accomodate real/realtime
values and expressions.
- Calculate delay statement delays using elaborated expressions instead
of pre-elaborated expression trees.
- Implement the wait statement behaviorally instead of as nets.
- Support event names as expression elements.
- Fix configuration errors, spelling errors, clarification of certain
objects.
See internal revision logs in each file for more elaboration.
of each port on bento and for recent fixes. Unfortunately at some point I
got confused and switched to the wrong list :-) As a result I picked up a
number of ports that were fixed a while ago. Sorry for the false alarm,
maintainers.
Pointy hat to: kris
Comparing the old distfile from ftp.freebsd.org and the new one
from sourceforge revealled a lot of documentation and code updates,
which none looked suspicious.
From the PR:
Fixed a bug in truss graphics code for all versions. Also,
the pre-compiled binary package slffeabin.tgz for is now
compiled using dynamic Mesa libraries rather than static.
RP: ports/57337
Submitted by: Mark Linimon <linimon@lonesome.com>
1) This is a common tarball with french/aster: the tarball has
been rerolled to fix a bug in ASTK for Linux, but they did not
upgrade the version. Our ASTK is not impacted by this change.
The full story, in french, is here:
<http://www.code-aster.org/forum/read.php?f=11&;i=326&t=326>.
2) Since I was testing this upgrade, I have found a bug from the
previous commit: the patch patch-lib::ASTK::astkrc::outils does
not belong to files, but to files.client => bumping PORTREVISION.
PR: ports/56288
Submitted by: Thierry Thomas <thierry@pompo.net>
This patch allows the admin of the machine to choose either
print/ghostscript-gnu or print/ghostscript-afp1
PR: ports/54918
Submitted by: Jens Rehsack <rehsack@liwing.de>
1) cad/astk-serveur has been switched from tcl/tk 83 to 84 (see
Message-ID: <200308170148.h7H1m91d025773@repoman.freebsd.org>)
=> we have to bump the client's PORTREVISION to chase this upgrade.
2) Since I'm there, I have defined Gmsh & Grace in the tools config.
Note: this is missing from the original tarball, and should be fixed
within the next release.
PR: ports/55707
Submitted by: Thierry Thomas <thierry@pompo.net>
A did some minor cleanup of the port, hopefully this will
work on gcc-3.3. I suggest this port is moved to the science
category, along with freefem and femlab.
PR: ports/54964
Submitted by: Pedro F. Giffuni <giffunip@yahoo.com>
port can be maintained: previously there were multifile patches and several
patches for the same file, now it is a lot cleaner.
2. I also merged a memory leak fix and some fixes from
spice3f5-spaghetti.
4. MFB and removed GNUREADLINE support
5. honor CFLAGS and CC.
6. Add documentation.
7. Maho didn't change the name of port spice to spice3.
because spice4 might :) appear in the future. version number
should be listed on *only* PORTVERSION.
8. drom maintainership
PR: 54603
Submitted by: "Pedro F. Giffuni" <giffunip@yahoo.com>
tochnog is a free finite element program with many features which is
distributed under GPL. TOCHNOG accepts free format input.
Boundary conditions can be imposed at geometrical entities,
as well as nodes and elements.
PR: 52088
Submitted by: Pedro F. Giffuni <giffunip@yahoo.com>
fixed the spooles port
b) there are three (small) missing patches from the experimental
tree that are not in the files dir.
Submitted by: "Pedro F. Giffuni" <giffunip@yahoo.com>
Reviewed by: maho
other changes to make the program easier to configure and use.
b. Drop the maintainership.
PR: 53603
Submitted by: Pedro F. Giffuni <giffunip@yahoo.com>
A free CAD system and high level development tool for
Engineering. It's a very interesting port for some branches
of engineering.
PR: ports/52202
Submitted by: Pedro F. Giffuni <giffunip@yahoo.com>
1. ports/math/spooles uses threading, so add pthread explicitly
for 5.1-BETA we don't ever need it.
2. _toupper should be a macro version of subset of toupper.
See the difference between ctype.h of 5.1-BETA and 4-STABLE.
However, I don't see the reason why it cgx uses _toupper (thread safety?).
Pointed out by: kris
The new install routine installs directories without user
access bits set.
PR: ports/48184
Submitted by: Thomas E. Zander <riggs@mugiri-in-au.dyndns.tv>
