1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/lib/libarchive/archive_entry.3

421 lines
14 KiB
Groff
Raw Normal View History

.\" Copyright (c) 2003-2007 Tim Kientzle
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd December 15, 2003
.Dt archive_entry 3
.Os
.Sh NAME
.Nm archive_entry_acl_add_entry ,
.Nm archive_entry_acl_add_entry_w ,
.Nm archive_entry_acl_clear ,
.Nm archive_entry_acl_count ,
.Nm archive_entry_acl_next ,
.Nm archive_entry_acl_next_w ,
.Nm archive_entry_acl_reset ,
.Nm archive_entry_acl_text_w ,
.Nm archive_entry_atime ,
.Nm archive_entry_atime_nsec ,
.Nm archive_entry_clear ,
.Nm archive_entry_clone ,
.Nm archive_entry_copy_fflags_text_w ,
.Nm archive_entry_copy_gname ,
.Nm archive_entry_copy_gname_w ,
.Nm archive_entry_copy_hardlink ,
.Nm archive_entry_copy_hardlink_w ,
.Nm archive_entry_copy_pathname_w ,
.Nm archive_entry_copy_stat ,
.Nm archive_entry_copy_symlink ,
.Nm archive_entry_copy_symlink_w ,
.Nm archive_entry_copy_uname ,
.Nm archive_entry_copy_uname_w ,
.Nm archive_entry_dev ,
.Nm archive_entry_devmajor ,
.Nm archive_entry_devminor ,
.Nm archive_entry_filetype ,
.Nm archive_entry_fflags ,
.Nm archive_entry_fflags_text ,
.Nm archive_entry_free ,
.Nm archive_entry_gid ,
.Nm archive_entry_gname ,
.Nm archive_entry_hardlink ,
.Nm archive_entry_ino ,
.Nm archive_entry_mode ,
.Nm archive_entry_mtime ,
.Nm archive_entry_mtime_nsec ,
.Nm archive_entry_nlink ,
.Nm archive_entry_new ,
.Nm archive_entry_pathname ,
.Nm archive_entry_pathname_w ,
.Nm archive_entry_rdev ,
.Nm archive_entry_rdevmajor ,
.Nm archive_entry_rdevminor ,
.Nm archive_entry_set_atime ,
.Nm archive_entry_set_ctime ,
.Nm archive_entry_set_dev ,
.Nm archive_entry_set_devmajor ,
.Nm archive_entry_set_devminor ,
.Nm archive_entry_set_filetype ,
.Nm archive_entry_set_fflags ,
.Nm archive_entry_set_gid ,
.Nm archive_entry_set_gname ,
.Nm archive_entry_set_hardlink ,
.Nm archive_entry_set_link ,
.Nm archive_entry_set_mode ,
2004-08-08 07:39:19 +00:00
.Nm archive_entry_set_mtime ,
.Nm archive_entry_set_pathname ,
.Nm archive_entry_set_rdevmajor ,
.Nm archive_entry_set_rdevminor ,
.Nm archive_entry_set_size ,
.Nm archive_entry_set_symlink ,
.Nm archive_entry_set_uid ,
.Nm archive_entry_set_uname ,
.Nm archive_entry_size ,
.Nm archive_entry_stat ,
.Nm archive_entry_symlink ,
.Nm archive_entry_uid ,
.Nm archive_entry_uname
.Nd functions for manipulating archive entry descriptions
.Sh SYNOPSIS
.In archive_entry.h
.Ft void
.Fo archive_entry_acl_add_entry
.Fa "struct archive_entry *"
.Fa "int type"
.Fa "int permset"
.Fa "int tag"
.Fa "int qual"
.Fa "const char *name"
.Fc
.Ft void
.Fo archive_entry_acl_add_entry_w
.Fa "struct archive_entry *"
.Fa "int type"
.Fa "int permset"
.Fa "int tag"
.Fa "int qual"
.Fa "const wchar_t *name"
.Fc
.Ft void
.Fn archive_entry_acl_clear "struct archive_entry *"
.Ft int
.Fn archive_entry_acl_count "struct archive_entry *" "int type"
.Ft int
.Fo archive_entry_acl_next
.Fa "struct archive_entry *"
.Fa "int want_type"
.Fa "int *type"
.Fa "int *permset"
.Fa "int *tag"
.Fa "int *qual"
.Fa "const char **name"
.Fc
.Ft int
.Fo archive_entry_acl_next_w
.Fa "struct archive_entry *"
.Fa "int want_type"
.Fa "int *type"
.Fa "int *permset"
.Fa "int *tag"
.Fa "int *qual"
.Fa "const wchar_t **name"
.Fc
2005-11-24 10:06:05 +00:00
.Ft int
.Fn archive_entry_acl_reset "struct archive_entry *" "int want_type"
.Ft const wchar_t *
.Fn archive_entry_acl_text_w "struct archive_entry *" "int flags"
.Ft time_t
.Fn archive_entry_atime "struct archive_entry *"
.Ft long
.Fn archive_entry_atime_nsec "struct archive_entry *"
2005-11-24 10:06:05 +00:00
.Ft "struct archive_entry *"
.Fn archive_entry_clear "struct archive_entry *"
.Ft struct archive_entry *
.Fn archive_entry_clone "struct archive_entry *"
.Ft const wchar_t *
.Fn archive_entry_copy_fflags_text_w "struct archive_entry *" "const wchar_t *"
.Ft void
.Fn archive_entry_copy_gname "struct archive_entry *" "const char *"
.Ft void
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Fn archive_entry_copy_gname_w "struct archive_entry *" "const wchar_t *"
.Ft void
.Fn archive_entry_copy_hardlink "struct archive_entry *" "const char *"
.Ft void
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Fn archive_entry_copy_hardlink_w "struct archive_entry *" "const wchar_t *"
.Ft void
.Fn archive_entry_copy_pathname_w "struct archive_entry *" "const wchar_t *"
.Ft void
2005-11-24 10:06:05 +00:00
.Fn archive_entry_copy_stat "struct archive_entry *" "const struct stat *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft void
.Fn archive_entry_copy_symlink "struct archive_entry *" "const char *"
.Ft void
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Fn archive_entry_copy_symlink_w "struct archive_entry *" "const wchar_t *"
.Ft void
.Fn archive_entry_copy_uname "struct archive_entry *" "const char *"
.Ft void
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Fn archive_entry_copy_uname_w "struct archive_entry *" "const wchar_t *"
.Ft dev_t
.Fn archive_entry_dev "struct archive_entry *"
.Ft dev_t
.Fn archive_entry_devmajor "struct archive_entry *"
.Ft dev_t
.Fn archive_entry_devminor "struct archive_entry *"
.Ft mode_t
.Fn archive_entry_filetype "struct archive_entry *"
.Ft void
.Fo archive_entry_fflags
.Fa "struct archive_entry *"
.Fa "unsigned long *set"
.Fa "unsigned long *clear"
.Fc
.Ft const char *
.Fn archive_entry_fflags_text "struct archive_entry *"
.Ft void
.Fn archive_entry_free "struct archive_entry *"
.Ft const char *
.Fn archive_entry_gname "struct archive_entry *"
.Ft const char *
.Fn archive_entry_hardlink "struct archive_entry *"
.Ft ino_t
.Fn archive_entry_ino "struct archive_entry *"
.Ft mode_t
.Fn archive_entry_mode "struct archive_entry *"
.Ft time_t
.Fn archive_entry_mtime "struct archive_entry *"
.Ft long
.Fn archive_entry_mtime_nsec "struct archive_entry *"
.Ft unsigned int
.Fn archive_entry_nlink "struct archive_entry *"
.Ft struct archive_entry *
.Fn archive_entry_new "void"
.Ft const char *
.Fn archive_entry_pathname "struct archive_entry *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft const wchar_t *
.Fn archive_entry_pathname_w "struct archive_entry *"
.Ft dev_t
.Fn archive_entry_rdev "struct archive_entry *"
.Ft dev_t
.Fn archive_entry_rdevmajor "struct archive_entry *"
.Ft dev_t
.Fn archive_entry_rdevminor "struct archive_entry *"
.Ft void
.Fn archive_entry_set_dev "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_devmajor "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_devminor "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_filetype "struct archive_entry *" "unsigned int"
.Ft void
.Fo archive_entry_set_fflags
.Fa "struct archive_entry *"
.Fa "unsigned long set"
.Fa "unsigned long clear"
.Fc
.Ft void
.Fn archive_entry_set_gid "struct archive_entry *" "gid_t"
.Ft void
.Fn archive_entry_set_gname "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_hardlink "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_ino "struct archive_entry *" "unsigned long"
.Ft void
.Fn archive_entry_set_link "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_mode "struct archive_entry *" "mode_t"
.Ft void
2004-08-08 07:39:19 +00:00
.Fn archive_entry_set_mtime "struct archive_entry *" "time_t" "long nanos"
.Ft void
.Fn archive_entry_set_nlink "struct archive_entry *" "unsigned int"
.Ft void
.Fn archive_entry_set_pathname "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_rdev "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_rdevmajor "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_rdevminor "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_size "struct archive_entry *" "int64_t"
.Ft void
.Fn archive_entry_set_symlink "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_uid "struct archive_entry *" "uid_t"
.Ft void
.Fn archive_entry_set_uname "struct archive_entry *" "const char *"
.Ft int64_t
.Fn archive_entry_size "struct archive_entry *"
.Ft const struct stat *
.Fn archive_entry_stat "struct archive_entry *"
.Ft const char *
.Fn archive_entry_symlink "struct archive_entry *"
.Ft const char *
.Fn archive_entry_uname "struct archive_entry *"
.Sh DESCRIPTION
These functions create and manipulate data objects that
represent entries within an archive.
You can think of a
.Tn struct archive_entry
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
as a heavy-duty version of
.Tn struct stat :
it includes everything from
.Tn struct stat
plus associated pathname, textual group and user names, etc.
These objects are used by
.Xr libarchive 3
to represent the metadata associated with a particular
entry in an archive.
.Ss Create and Destroy
There are functions to allocate, destroy, clear, and copy
.Va archive_entry
objects:
.Bl -tag -compact -width indent
.It Fn archive_entry_clear
Erases the object, resetting all internal fields to the
same state as a newly-created object.
This is provided to allow you to quickly recycle objects
without thrashing the heap.
.It Fn archive_entry_clone
A deep copy operation; all text fields are duplicated.
.It Fn archive_entry_free
Releases the
.Tn struct archive_entry
object.
.It Fn archive_entry_new
Allocate and return a blank
.Tn struct archive_entry
object.
.El
.Ss Set and Get Functions
Most of the functions here set or read entries in an object.
Such functions have one of the following forms:
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Bl -tag -compact -width indent
.It Fn archive_entry_set_XXXX
Stores the provided data in the object.
In particular, for strings, the pointer is stored,
not the referenced string.
.It Fn archive_entry_copy_XXXX
As above, except that the referenced data is copied
into the object.
.It Fn archive_entry_XXXX
Returns the specified data.
In the case of strings, a const-qualified pointer to
the string is returned.
.El
String data can be set or accessed as wide character strings
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
or normal
.Va char
strings.
The functions that use wide character strings are suffixed with
.Cm _w .
Note that these are different representations of the same data:
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
For example, if you store a narrow string and read the corresponding
wide string, the object will transparently convert formats
using the current locale.
Similarly, if you store a wide string and then store a
narrow string for the same data, the previously-set wide string will
be discarded in favor of the new data.
.Pp
There are a few set/get functions that merit additional description:
.Bl -tag -compact -width indent
.It Fn archive_entry_set_link
This function sets the symlink field if it is already set.
Otherwise, it sets the hardlink field.
.El
.Ss File Flags
File flags are transparently converted between a bitmap
representation and a textual format.
For example, if you set the bitmap and ask for text, the library
will build a canonical text format.
However, if you set a text format and request a text format,
you will get back the same text, even if it is ill-formed.
If you need to canonicalize a textual flags string, you should first set the
text form, then request the bitmap form, then use that to set the bitmap form.
Setting the bitmap format will clear the internal text representation
and force it to be reconstructed when you next request the text form.
.Pp
The bitmap format consists of two integers, one containing bits
that should be set, the other specifying bits that should be
cleared.
Bits not mentioned in either bitmap will be ignored.
Usually, the bitmap of bits to be cleared will be set to zero.
In unusual circumstances, you can force a fully-specified set
of file flags by setting the bitmap of flags to clear to the complement
of the bitmap of flags to set.
(This differs from
.Xr fflagstostr 3 ,
which only includes names for set bits.)
Converting a bitmap to a textual string is a platform-specific
operation; bits that are not meaningful on the current platform
will be ignored.
.Pp
The canonical text format is a comma-separated list of flag names.
The
.Fn archive_entry_copy_fflags_text_w
function parses the provided text and sets the internal bitmap values.
This is a platform-specific operation; names that are not meaningful
on the current platform will be ignored.
The function returns a pointer to the start of the first name that was not
recognized, or NULL if every name was recognized.
Note that every name--including names that follow an unrecognized name--will
be evaluated, and the bitmaps will be set to reflect every name that is
recognized.
(In particular, this differs from
.Xr strtofflags 3 ,
which stops parsing at the first unrecognized name.)
.Ss ACL Handling
XXX This needs serious help.
XXX
.Pp
An
.Dq Access Control List
(ACL) is a list of permissions that grant access to particular users or
groups beyond what would normally be provided by standard POSIX mode bits.
The ACL handling here addresses some deficiencies in the POSIX.1e draft 17 ACL
specification.
In particular, POSIX.1e draft 17 specifies several different formats, but
none of those formats include both textual user/group names and numeric
UIDs/GIDs.
.Pp
XXX explain ACL stuff XXX
.\" .Sh EXAMPLE
.\" .Sh RETURN VALUES
.\" .Sh ERRORS
.Sh SEE ALSO
.Xr archive 3
.Sh HISTORY
The
.Nm libarchive
library first appeared in
.Fx 5.3 .
.Sh AUTHORS
.An -nosplit
The
.Nm libarchive
library was written by
.An Tim Kientzle Aq kientzle@acm.org .
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.\" .Sh BUGS