a bugfix of clearing the On-Demand flag when going back to 100%. It
has been tested and works on an IBM R32. Note original work done by
Ted Unangst and sobomax@.
IRQ 0 and not an ExtINT pin. The MADT enumerators ignore the PC-AT flag
and ignore overrides that map IRQ 0 to pin 2 when this quirk is present.
- Add a block comment above the quirks to document each quirk so that we
can use more verbose descriptions quirks.
MFC after: 2 weeks
ACPI MADT only does if the PC-AT flag is set), then don't assume that pin 0
on the first I/O APIC is an ExtINT pin. Instead, assume that it is ISA
IRQ 0.
on the previous generation of Pentium-M processors (Banias). Support for
Dothan and later processors involves working with acpi_perf(4) to extract
information about supported states. This driver should work on MP systems
including HTT. It is experimental and may have a few bugs but has been
tested to not crash at least.
Thanks to Colin Percival for his initial work on this driver.
preliminary support for using the GCC-compatibility of ICC was committed
but couldn't be tested at that time due to problems with ICC itself. Since
ICC 8.1 it's possible to use its GCC-compatibility under FreeBSD and it
turned out that a typedef for __gnuc_va_list is required in that case.
Revert the part of rev. 1.8 which #ifdef'ed out __gnuc_va_list for ICC.
MFC after: 1 week
parent cpu device before passing it to pcpu_find(). Get the ivars from the
child, not parent cpu device. These bugs would cause a panic when
dereferencing the pcpu ivar, but weren't present in the acpi attachment
which it seems most people are using.
former is callable from user space and the latter from the kernel one. Make
kernel version take additional argument which tells if the respective call
should check for additional restrictions for sending signals to suid/sugid
applications or not.
Make all emulation layers using non-checked version, since signal numbers in
emulation layers can have different meaning that in native mode and such
protection can cause misbehaviour.
As a result remove LIBTHR from the signals allowed to be delivered to a
suid/sugid application.
Requested (sorta) by: rwatson
MFC after: 2 weeks
and wd80x3 support. Make the obscure ISA cards optional, and add
those options to NOTES on i386 (note: the ifdef around the whole code
is for module building). Tweak pc98 ed support to include wd80x3 too.
Add goo for alpha too.
The affected cards are the 3Com 3C503, HP LAN+ and SIC (whatever that
is). I couldn't find any of these for sale on ebay, so they are
untested. If you have one of these cards, and send it to me, I'll
ensure that you have no future problems with it...
Minor cleanups as well by using functions rather than cut and paste
code for some probing operations (where the function call overhead is
lost in the noise).
Remove use of kvtop, since they aren't required anymore. This driver
needs to get its memory mapped act together, however, and use bus
space. It doesn't right now.
This reduces the size of if_ed.ko from about 51k to 33k on my laptop.
which will help to debug hangs on boot.
- Remove 'U' from debug.watchdog sysctl definition, so if we set it to '-1'
it really shows '-1'.
- Fix comment.
Reviewed by: rwatson
rather than forwarding interrupts from the clock devices around using IPIs:
- Add an IDT vector that pushes a clock frame and calls
lapic_handle_timer().
- Add functions to program the local APIC timer including setting the
divisor, and setting up the timer to either down a periodic countdown
or one-shot countdown.
- Add a lapic_setup_clock() function that the BSP calls from
cpu_init_clocks() to setup the local APIC timer if it is going to be
used. The setup uses a one-shot countdown to calibrate the timer. We
then program the timer on each CPU to fire at a frequency of hz * 3.
stathz is defined as freq / 23 (hz * 3 / 23), and profhz is defined as
freq / 2 (hz * 3 / 2). This gives the clocks relatively prime divisors
while keeping a low LCM for the frequency of the clock interrupts.
Thanks to Peter Jeremy for suggesting this approach.
- Remove the hardclock and statclock forwarding code including the two
associated IPIs. The bitmap IPI handler has now effectively degenerated
to just IPI_AST.
- When the local APIC timer is used we don't turn the RTC on at all, but
we still enable interrupts on the ISA timer 0 (i8254) for timecounting
purposes.
the semantics in that the returned filename to use is now a kernel
pointer rather than a user space pointer. This required changing the
arguments to the CHECKALT*() macros some and changing the various system
calls that used pathnames to use the kern_foo() functions that can accept
kernel space filename pointers instead of calling the system call
directly.
- Use kern_open(), kern_access(), kern_execve(), kern_mkfifo(), kern_mknod(),
kern_setitimer(), kern_getrusage(), kern_utimes(), kern_unlink(),
kern_chdir(), kern_chmod(), kern_chown(), kern_symlink(), kern_readlink(),
kern_select(), kern_statfs(), kern_fstatfs(), kern_stat(), kern_lstat(),
kern_fstat().
- Drop the unused 'uap' argument from spx_open().
- Replace a stale duplication of vn_access() in xenix_access() lacking
recent additions such as MAC checks, etc. with a call to kern_access().
reboot. Safter the reboot the TCC is usually in the Automatic mode, in which
reading current performance level is likely to produce bogus results make sure
to switch it to the On-Demand mode and set to some known performance level.
Unfortunately there is no reliable way to check that TCC is in the Automatic
mode. Reading bit 4 of ACPI Thermal Monitor Control Register produces 0
regardless of the current mode.
MFC after: 1 week
uses the i8237 without trying to emulate the PC architecture move
the register definitions for the i8237 chip into the central include
file for the chip, except for the PC98 case which is magic.
Add new isa_dmatc() function which tells us as cheaply as possible
if the terminal count has been reached for a given channel.
devclass. As pointed out by dfr@, devclasses don't have to share the same
linkage if multiple drivers have the same name. Newbus should match the
devclasses based on name and allocate non-conflicting unit numbers.
millisecond it is calibrating. Suggested by jhb@ and bde@. Don't clobber
the tsc_freq with the new value since it isn't accurate enough for
timecounters and the timecounter system as a whole needs support for
changing rates before we do this. Subtract 0.5% from our measurement
to account for overhead in DELAY. Note that this interface is for
estimating the clockrate and needs to work well at runtime so doing a full
calibration including disabling interrupts for a second is not feasible.
interrupts, read from the interrupt status register to clear any pending
interrupts. Otherwise in some rare cases the RTC would never fire any
interrupts as it constantly thinks it has an interrupt pending.
PR: i386/17800
PR: kern/76776
Submitted by: Jose M. Alcaide jose at we dot lc dot ehu dot es
MFC after: 2 weeks
copies arguments into the kernel space and one that operates
completely in the kernel space;
o use kernel-only version of execve(2) to kill another stackgap in
linuxlator/i386.
Obtained from: DragonFlyBSD (partially)
MFC after: 2 weeks
i386_{get,set}_ioperm() and make those APIs visible in the kernel namespace;
o use i386_{get,set}_ldt() and i386_{get,set}_ioperm() instead of sysarch()
in the linuxlator, which allows to kill another two stackgaps.
MFC after: 2 weeks
interrupts that have a trigger mode of conforming. This fixes problems on
some older machines that still route PCI devices via ISA interrupts when
using an I/O APIC.
Tested by: Peter Trifonov pvtrifonov at mail dot ru
MFC after: 1 month
instead of burying that in the atpic(4) code as atpic(4) is not the only
user of elcr(4). Change the elcr(4) code to export a global elcr_found
variable that other code can check to see if a valid ELCR was found.
MFC after: 1 month
(calling a __dead2 function such as panic() at the end of a function), the
saved %eip on the stack will actually not be part of the function that
executed a call instruction but instead will be the first instruction of
the next function in the text. This happens with dblfault_handler() and
syscall() for example. Work around this in the one place it matters by
looking at the saved %eip - 1 to determine the calling function when we
check for "magic" frames.
MFC after: 2 weeks
interrupt is wired up to all the I/O APICs in the system. If the system
has only one I/O APIC, then just act as if the entry specified that APIC.
We still don't try to handle global entries in a system with multiple I/O
APICs.
Tested by: Peter Trifonov pvtrifonov at mail dot ru
MFC after: 1 week
- Fix the MP Table pci bridge drivers to not probe the configuration table
unless we actually have one. Machines using a default configuration do
not have such a table.
- Only allow default configuration types of 5 (ISA + PCI) and 6 (EISA +
PCI) as the others are not likely to work. Types 1 through 4 use an
external APIC (probably with 80486 processors) which we certainly do not
support, and type 7 uses an MCA bus which has not been tested with the
new MP Table code.
- Correct the fact that the single I/O APIC in a default configuration has
an ID of 2, not 0.
- Fix off by one errors in setting the bus types from the default_data[]
arrays for default configurations.
- Explicitly configure each of the 16 interrupt pins on the sole I/O APIC
when using a default configuration. This is especially helpful for type
6 (EISA + PCI) since the EISA interrupts need to have their polarity
programmed based on the values in the ELCR.
Much thanks to the submitter and tester who endured several rounds of
testing to get this fixed.
MFC after: 1 week
Tested by: Georg Schwarz georg dot schwarz at freenet dot de
cuts to the chase and fills in a provided s/g list. This is meant to optimize
out the cost of the callback since the callback doesn't serve much purpose for
mbufs since mbuf loads will never be deferred. This is just for amd64 and
i386 at the moment, other arches will be coming shortly.
from 4.x kernel config files. User's wishing to upgrade from 4.x to 6
will need to go through 5.x, or grab this script from there. These
scripts will remain in RELENG_5...
other comments. Clarify that the next two things needed for SMP are
two lines.
- Expand mii abbreviation to miibus for clarity in the USB ethernet
comment.
system from an AP at runtime (i.e., calling cpu_reset from ddb). Someday,
if we move to an NMI for stopping cpus instead, we can do away with this.
Requested by: jhb
though these aren't used yet.
- Add missing function prototypes for some static functions.
- Allow lvt_mode() to handle an LVT entry with a delivery mode of fixed.
- Consolidate code duplicated in lapic_init() and lapic_setup() to program
the spurious vector register of a local APIC in a static lapic_enable()
function.
- Dump the timer, thermal, error, and performance counter LVT entries
during lapic_dump().
- Program LVT pins (currently only LINT0 and LINT1) after the local
APIC has been software enabled via lapic_enable() since otherwise the
LVT programming will not be able to unmask LVT sources.
on entry and it assumes the responsibility for releasing the page queues
lock if it must sleep.
Remove a bogus comment from pmap_enter_quick().
Using the first change, modify vm_map_pmap_enter() so that the page queues
lock is acquired and released once, rather than each time that a page
is mapped.
Currently this is only used to initiailize the TPR to 0 during initial
setup.
- Reallocate vectors for the local APIC timer, error, and thermal LVT
entries. The timer entry is allocated from the top of the I/O interrupt
range reducing the number of vectors available for hardware interrupts
to 191. Linux happens to use the same exact vector for its timer
interrupt as well. If the timer vector shared the same priority queue
as the IPI handlers, then the frequency that the timer vector will
eventually be firing at can interact badly with the IPIs resulting in
the queue filling and the dreaded IPI stuck panics, hence it being located
at the top of the previous priority queue instead.
- Fixup various minor nits in comments.
In such cases, the busying of the page and the unlocking of the
containing object by vm_map_pmap_enter() and vm_fault_prefault() is
unnecessary overhead. To eliminate this overhead, this change
modifies pmap_enter_quick() so that it expects the object to be locked
on entry and it assumes the responsibility for busying the page and
unlocking the object if it must sleep. Note: alpha, amd64, i386 and
ia64 are the only implementations optimized by this change; arm,
powerpc, and sparc64 still conservatively busy the page and unlock the
object within every pmap_enter_quick() call.
Additionally, this change is the first case where we synchronize
access to the page's PG_BUSY flag and busy field using the containing
object's lock rather than the global page queues lock. (Modifications
to the page's PG_BUSY flag and busy field have asserted both locks for
several weeks, enabling an incremental transition.)
the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98
ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one
in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver.
I've tested this my PC-9821RaS40 with moused. I've not tested this on i386
because I have no InPort cards, or similar such things. NEC standardized
on bus mice very early, long before ps/2 mice ports apeared, so all PC-98
machines supported by FreeBSD/pc98 have bus mice, I believe.
Reviewed by: nyan-san
between object code generated without the flag but it makes sense and might
make a difference in the future.
PR: kern/53008
Submitted by: Jens Rehsack rehsack at liwing de
stepped the process to the system call), we need to clear the trap flag
from the new frame unless the debugger had set PF_FORK on the parent.
Otherwise, the child will receive a (likely unexpected) SIGTRAP when it
executes the first instruction after returning to userland.
Reviewed by: bde
MFC after: 3 days
as this may cause deadlocks.
This should fix kern/72123.
Discussed with: jhb
Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA
Izzet BESKARDES, Jens Binnewies, Karl Keusgen
Approved by: sam (mentor)
These devices should be probed first because they are at fixed
locations and cannot be turned off. ISA PNP devices, on the other
hand, can be turned off and often can be flexible in the resources
they use. Probe them last, as always.
actually is a property of the northbridge and applies to all PCI/PCI-X/PCIe
devices in the system, though only PCIe devices will respond to registers
higher than 256. This uses per-CPU pools of temporary mappings so that
the whole 256MB of configuration space doesn't have to be mapped all at
once. While the sf_buf API was considered for this, the fact that it
requires sleep locks and can return failure made it unsuitable for this use.
For now only the Intel Grantsdale and Lindenhurst (925 and 752x) chipsets are
supported. Since there doesn't appear to be a compatible way to determine
northbridge support, new chipsets will have to be explicitely added in the
future.
specified register, but a pointer to the in-memory representation of
that value. The reason for this is twofold:
1. Not all registers can be represented by a register_t. In particular
FP registers fall in that category. Passing the new register value
by reference instead of by value makes this point moot.
2. When we receive a G or P packet, both are for writing a register,
the packet will have the register value in target-byte order and
in the memory representation (modulo the fact that bytes are sent
as 2 printable hexadecimal numbers of course). We only need to
decode the packet to have a pointer to the register value.
This change fixes the bug of extracting the register value of the P
packet as a hexadecimal number instead of as a bit array. The quick
(and dirty) fix to bswap the register value in gdb_cpu_setreg() as
it has been added on i386 and amd64 can therefore be removed and has
in fact been that.
Tested on: alpha, amd64, i386, ia64, sparc64
Consolidate all of the bounce tests into the BUS_DMA_COULD_BOUNCE flag.
Allocate the bounce zone at either tag creation or map creation to help
avoid null-pointer derefs later on. Track total pages per zone so that
each zone can get a minimum allocation at tag creation time instead of
being defeated by mis-behaving tags that suck up the max amount.
i386 to dev/acpi_support. In theory, these devices could be found
other than in i386 machines only as amd64 becomes more popular. These
drivers don't appear to do anything i386 specific, so move them to
dev/acpi_support. Move config lines to files so that those
architectures that don't support kernel modules can build them into
the kernel. At the same time, rename acpi_snc to acpi_sony to follow
the lead of all the other specialty devices.
models of laptops, which are essentially the same as the normal
ones, as far as acpi_asus is concerned[1]
o Use the above as an excuse to reshuffle the mess I made of the
probe function when I originally wrote it.
Reported by: Soeren Larsen <soeren@whiteswan.dk>
of atomic_store_rel().
- Use the 80386 versions of atomic_load_acq() and atomic_store_rel() that
do not use serializing instructions on all UP kernels since a UP machine
does need to synchronize with other CPUs. This trims lots of cycles from
spin locks on UP kernels among other things.
Benchmarked by: rwatson
appropriate for different tag requirements. With the former global pool,
bounce pages might get allocated that are appropriate for one tag, but not
appropriate for another, but the system had no way to distinguish between them.
Now zones with distinct attributes are created to hold pages, and each tag
that requires bouncing is associated with a zone. New zones are created as
needed if no existing zones can meet the requirements of the tag. Stats for
each zone are tracked via the hw.busdma sysctl node.
This should help drivers that are failing with mysterious data corruption.
MFC After: 1 week
Change the spelling of the "catch" option to be consistent with the new
options. Implement the "no wait" option. An implementation of the "CPU
private" for i386 will be committed at a later date.
Expose some of the amd64-specific sysarch functions to allow alternative
implementations of the %fs/%gs code for TLS, threads, etc. USER_LDT does
not exist on the amd64 kernel, so we have to implement things other ways.
control the number of lines per page rather than a constant. The variable
can be examined and changed in ddb as '$lines'. Setting the variable to
0 will effectively turn off paging.
- Change db_putchar() to force out pending whitespace before outputting
newlines and carriage returns so that one can rub out content on the
current line via '\r \r' type strings.
- Change the simple pager to rub out the --More-- prompt explicitly when
the routine exits.
- Add some aliases to the simple pager to make it more compatible with
more(1): 'e' and 'j' do a single line. 'd' does half a page, and
'f' does a full page.
MFC after: 1 month
Inspired by: kris
the final set of traces -- someone with more busdma background
will probably want to review and expand this, as well as port to
other platforms. This tracing is sufficient to identify key
busdma events on i386, and in particular to draw attention to
bounce buffering events that may have a substantial performance
impact.
modes on a tty structure.
Both the ".init" and the current settings are initialized allowing
the function to be used both at attach and open time.
The function takes an argument to decide if echoing should be enabled.
Echoing should not be enabled for regular physical serial ports
unless they are consoles, in which case they should be configured
by ttyconsolemode() instead.
Use the new function throughout.
invalidate the TLB(s) if the old mapping wasn't used by the CPU. With
network interfaces that implement checksum off-loading, the old mapping is
almost never used by the CPU, only by the device driver for setting up the
DMA operation.
Reviewed by: tegge@
