callout_reset rather than calling callout_stop. This results in a few
lines of code duplication, but it provides a significant performance
improvement because it avoids recursing on callout_lock.
Requested by: rwatson
or multicast packet, we don't need to acquire the inpcb mutex
unless we are actually using inpcb fields other than the bound port
and address. Since we hold the pcbinfo lock already, these can't
change. Defer acquiring the inpcb mutex until we have a high
chance of a match. This avoids about 120 mutex operations per UDP
broadcast packet received on one of my work systems.
Reviewed by: sam
want a splash screen.
There seems to be some confusion in the syscons code as to the meaning of
the SC_KERNEL_CONSOLE flag. Its absence is sometimes interpreted to mean
"I am not the system console", and sometimes to mean "I am not the only
VGA console" (see the font loading code for an example of the latter).
Someone with better syscons fu than myself should take a closer look.
(that does not compile with !gcc). Moreover we get the benefit for all archs
that have a hand optimized in_cksum_skip().
Submitted by: yongari
Tested by: me (i386, extensivly), pf4freebsd ML (various)
the chunk will never be added to the list in that case. Use type mbr
for GPT nested MBRs and use type part for any partition we don't know
or care about. Since the subtype is 0, this should not cause confusion.
better check for 'adjacent'. The old code assumed that if two resources
were adjacent in the linked list that they were also adjacent range wise.
This is not true when a resource manager has to manage disparate regions.
For example, the current interrupt code on i386/amd64 will instruct
irq_rman to manage two disjoint regions: 0-1 and 3-15 for the non-APIC
case. If IRQs 1 and 3 were allocated and then released, the old code
would coalesce across the 1 to 3 boundary because the resources were
adjacent in the linked list thus adding 2 to the area of resources that
irq_rman managed as a side effect. The fix adds extra checks so that
adjacent unallocated resources are only merged with the resource being
freed if the start and end values of the resources also match up. The
patch also consolidates the checks for adjacent resources being allocated.
following behavior:
* Link devices return invalid status (_STA) values. The results are very
unreliable -- sometimes never present. Just ignore the status and pick
the best configuration from _PRS.
* Link devices return invalid current settings (_CRS). Even after setting
the link value, many systems still return a different setting for _CRS.
When setting an IRQ, don't bother to check _CRS to see if we succeeded.
Note that we still check _CRS before routing and this should be addressed
as well.
Since this is a sensitive area, leave the old behavior accessible via
uncommenting the define for ACPI_OLD_PCI_LINK at the top of the file. Once
this has been thoroughly tested, this option and the code it covers will
be removed.
Thanks to Len Brown at Intel for informing us of these issues as he worked
around them in Linux.
location (for the wake code). It should not be needed since we don't
map other pages at the same location and if there was an old mapping, it
would be restored by a fault. The old code had serious problems, namely
that it was restoring the new page it had just removed (not opage) and
it could only guess at the right protection (since there's no
pmap_extract_protect function). Thanks to Alan Cox for explaining much
of this to me.
Also, remove a commented-out initializecpu() call since it is not needed.
Restoring the cpu context is better than attempting to init from scratch.
Reviewed by: alc (earlier version)
have clear idea on boot2 BSS size and leaves portion of it not zeroed out.
btxcsu.s is in much better position for this job.
Obtained from: DragonflyBSD (with minor adjustments)
the submit and outbound daemon, else if sendmail_submit_enable=yes, don't
start the outbound daemon. Only one daemon should be started.
Also, do not rebuild database maps at boot time. The code didn't pay
attention to SENDMAIL_MAP_TYPE and assumed 'hash'. Also, admins may
not want maps automatically rebuilt just because the back end database
has changed. Finally, some maps are built with mode tools than just
makemap (e.g., using cidrexpand on the access text file before sending
it to makemap).
Noticed by: ache
Reviewed by: ache
Since HME doesn't compensate the checksum for UDP datagram which
can yield to 0x0, UDP transmit checksum offload is disabled by
default. The UDP Transmit checksum offload can be reactivated
by setting special link option link0 with ifconfig(8).
Approved by: jake (mentor)
Reviewed by: tmm
Tested by: Herve Boulouis <amon@sockar.homeip.net>
before grabbing BPF locks to see if there are any entries in order to
avoid the cost of locking if there aren't any. Avoids a mutex lock/
unlock for each packet received if there are no BPF listeners.
libc. The externally-visible effect of this is to add __isnanl() to
libm, which means that libm.so.2 can once again link against libc.so.4
when LD_BIND_NOW is set. This was broken by the addition of fdiml(),
which calls __isnanl().
o Remove the code that creates the boot directory on the EFI file
system after it has been mounted, as well as remove the code
that creates the symlink from /boot -> /efi/boot (*). As a result,
/boot will be extracted onto the root file system.
o Add a function efi_mountpoint() that returns the mount point of
the EFI file system or NULL if no EFI partition is created. This
function is used to both check whether there's an EFI file system
and to return what its mount point is.
o When there's no EFI file system, ask the user if this is what he
or she wants. Since we extract /boot onto the root file system,
we do not actually need an EFI file system for the installation to
work. Whether one wants to install without an EFI partition is
of course an entirely different question. We allow it...
o When we're done installing and need to fix up the various bits
and pieces, check if there's an EFI partition and if yes, move
/boot to /efi/boot and create a symlink /boot -> /efi/boot (*).
This is a much more reliable way to get /boot onto the EFI
partition than creating the symlink up front and hope its being
respected. It so happened that we never had the boot directory
end up on the EFI partition. We make the symlink relative.
(*) /efi is a place holder for the actual EFI mount point of course.
consumer and 'bio_pflags' which can be used by provider.
- Remove BIO_FLAG1 and BIO_FLAG2 flags. From now on new fields should be
used for internal flags.
- Update g_bio(9) manual page.
- Update some comments.
- Update GEOM_MIRROR, which was the only one using BIO_FLAGs.
Idea from: phk
Reviewed by: phk
instead of BD_ADDRs
- Convert BD_ADDRs in l2ping(8) output into the human readable names via
bt_gethostbyaddr(3)
- Introduce and document '-n' - numberic output option
Suggested by: Anil Madhavapeddy <anil at recoil dot org>
spin-wait code to use the same spin mutex (smp_tlb_mtx) as the TLB ipi
and spin-wait code snippets so that you can't get into the situation of
one CPU doing a TLB shootdown to another CPU that is doing a lazy pmap
shootdown each of which are waiting on each other. With this change, only
one of the CPUs would do an IPI and spin-wait at a time.
