not able to trigger the issue with sample boards, some users seems
to suffer from freeze/lockup when system is booted without UTP cable
plugged in. I'm not sure whether this is BIOS issue or controller
bug. This change fixes AR8132 lockup issue seen on EEE PC.
Reported by: kmoore
Tested by: kmoore
These do something else in ksh: name=(...) is an array or compound variable
assignment and the others are extended patterns.
This is the last patch of the ones tested in the exp run.
Exp-run done by: pav (with some other sh(1) changes)
Apart from detecting breakage earlier or at all, this also fixes a segfault
in the testsuite. The "handling" of the breakage left an invalid internal
representation in some cases.
Examples:
echo a; do echo b
echo `) echo a`
echo `date; do do do`
Exp-run done by: pav (with some other sh(1) changes)
need locking as otherwise we may race against the other parts of the
MD code which expects a consistent state of these. While at it move
the resetting of the pmap before entering it in the TSB.
- Spell a 0 as TLB_CTX_KERNEL.
was incorrect as further down the road cons_probe() calls malloc() so the
former can't be called before init_heap() has succeed. Instead just exit
to the firmware in case init_heap() fails like OF_init() does when hitting
a problem as we're then likely running in a very broken environment where
hardly anything can be trusted to work.
subevalvar() incorrectly assumed that CTLESC bytes were present iff the
expansion was quoted. However, they are present iff various processing such
as word splitting is to be done later on.
Example:
v=@$e@$e@$e@
y="${v##*"$e"}"
echo "$y"
failed if $e contained the magic CTLESC byte.
Exp-run done by: pav (with some other sh(1) changes)
extra MACHINE_ARCH symlink for certain platforms (such as pc98). The
support for creating these symlinks was added to sys/conf/kern.post.mk in
changeset 152964. The intention of that commit was to remove this code
from config(8), but config(8) was never updated.
Approved by: imp
- Rename RES_BUS_SPACE_* into BUS_SPACE_* for consistency
- Trim out an unnecessary checking condition
Sponsored by: Sandvine Incorporated
Requested and reviewed by: jhb
flag. [1]
- Note that also fchflags(2) will return EPERM for attempts to set or
unset the SF_SNAPSHOT flag.
Submitted by: Garrett Cooper [1]
MFC after: 1 week
The code is inspired by NetBSD sh somewhat, but different because we
preserve the old Almquist/Bourne/Korn ability to have an unquoted part in a
quoted ${v+word}. For example, "${v-"*"}" expands to $v as a single field if
v is set, but generates filenames otherwise.
Note that this is the only place where we split text literally from the
script (the similar ${v=word} assigns to v and then expands $v). The parser
must now add additional markers to allow the expansion code to know whether
arbitrary characters in substitutions are quoted.
Example:
for i in ${$+a b c}; do echo $i; done
Exp-run done by: pav (with some other sh(1) changes)
NFSv4 client, since the call in ncl_inactive() might be missed
because VOP_INACTIVE() is not guaranteed to be called before
VOP_RECLAIM().
MFC after: 1 week
r198301 itself. It also broke the logic of not sending more than one
ARP request per second, that consequently lead to a potential problem
of flooding network with broadcast packets.
MFC after: 1 week
OF loader on systems where address cells and size cells are both 2 (the
Mambo simulator) and fix an error where cons_probe() was called before
init_heap() but used malloc() to set environment variables.
MFC after: 1 month
If double-quote state does not match, treat the '}' literally.
This ensures double-quote state remains the same before and after a
${v+-=?...} which helps with expand.c.
It makes things like
${foo+"\${bar}"}
which I have seen in the wild work as expected.
Exp-run done by: pav (with some other sh(1) changes)
- Sample CPU usage data from kern.cp_times, this makes for a far more
accurate and scheduler independent algorithm.
- Rip out the process list scraping that is no longer required.
- Don't update CPU usage sampling on every request, but every 15s
instead. This makes it impossible for an attacker to hide the CPU load
by triggering 4 samplings in short succession when the system is idle.
- After reaching the steady-state, the system will always report the
average CPU load of the last 60 sampled seconds.
- Untangling of call graph.
PR: kern/130222
Tested by: Julian Dunn <jdunn@aquezada.com>
Gustau Pérez <gperez@entel.upc.edu>
Jürgen Weiß <weiss@uni-mainz.de>
MFC after: 2 weeks
I'm unsure if some MIB standard states this must be the load average
for, eg. 300s, it looks like net-snmp isn't even bothering to implement
the CPU load reporting at all.
Changes:
Thu. April 1, 2010. guy@alum.mit.edu.
Summary for 4.1.1 tcpdump release
Fix build on systems with PF, such as FreeBSD and OpenBSD.
Don't blow up if a zero-length link-layer address is passed to
linkaddr_string().
Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu.
Summary for 4.1.0 tcpdump release
Fix printing of MAC addresses for VLAN frames with a length
field
Add some additional bounds checks and use the EXTRACT_ macros
more
Add a -b flag to print the AS number in BGP packets in ASDOT
notation rather than ASPLAIN notation
Add ICMPv6 RFC 5006 support
Decode the access flags in NFS access requests
Handle the new DLT_ for memory-mapped USB captures on Linux
Make the default snapshot (-s) the maximum
Print name of device (when -L is used)
Support for OpenSolaris (and SXCE build 125 and later)
Print new TCP flags
Add support for RPL DIO
Add support for TCP User Timeout (UTO)
Add support for non-standard Ethertypes used by 3com PPPoE gear
Add support for 802.11n and 802.11s
Add support for Transparent Ethernet Bridge ethertype in GRE
Add 4 byte AS support for BGP printer
Add support for the MDT SAFI 66 BG printer
Add basic IPv6 support to print-olsr
Add USB printer
Add printer for ForCES
Handle frames with an FCS
Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames
Fix TCP sequence number printing
Report 802.2 packets as 802.2 instead of 802.3
Don't include -L/usr/lib in LDFLAGS
On x86_64 Linux, look in lib64 directory too
Lots of code clean ups
Autoconf clean ups
Update testcases to make output changes
Fix compiling with/out smi (--with{,out}-smi)
Fix compiling without IPv6 support (--disable-ipv6)
Changes:
Thu. April 1, 2010. guy@alum.mit.edu.
Summary for 1.1.1 libpcap release
Update CHANGES to reflect more of the changes in 1.1.0.
Fix build on RHEL5.
Fix shared library build on AIX.
Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu.
Summary for 1.1.0 libpcap release
Add SocketCAN capture support
Add Myricom SNF API support
Update Endace DAG and ERF support
Add support for shared libraries on Solaris, HP-UX, and AIX
Build, install, and un-install shared libraries by default;
don't build/install shared libraries on platforms we don't support
Fix building from a directory other than the source directory
Fix compiler warnings and builds on some platforms
Update config.guess and config.sub
Support monitor mode on mac80211 devices on Linux
Fix USB memory-mapped capturing on Linux; it requires a new DLT_
value
On Linux, scan /sys/class/net for devices if we have it; scan
it, or /proc/net/dev if we don't have /sys/class/net, even if
we have getifaddrs(), as it'll find interfaces with no
addresses
Add limited support for reading pcap-ng files
Fix BPF driver-loading error handling on AIX
Support getting the full-length interface description on FreeBSD
In the lexical analyzer, free up any addrinfo structure we got back
from getaddrinfo().
Add support for BPF and libdlpi in OpenSolaris (and SXCE)
Hyphenate "link-layer" everywhere
Add /sys/kernel/debug/usb/usbmon to the list of usbmon locations
In pcap_read_linux_mmap(), if there are no frames available, call
poll() even if we're in non-blocking mode, so we pick up
errors, and check for the errors in question.
Note that poll() works on BPF devices is Snow Leopard
If an ENXIO or ENETDOWN is received, it may mean the device has
gone away. Deal with it.
For BPF, raise the default capture buffer size to from 32k to 512k
Support ps_ifdrop on Linux
Added a bunch of #ifdef directives to make wpcap.dll (WinPcap) compile
under cygwin.
Changes to Linux mmapped captures.
Fix bug where create_ring would fail for particular snaplen and
buffer size combinations
Update pcap-config so that it handles libpcap requiring
additional libraries
Add workaround for threadsafeness on Windows
Add missing mapping for DLT_ENC <-> LINKTYPE_ENC
DLT: Add DLT_CAN_SOCKETCAN
DLT: Add Solaris ipnet
Don't check for DLT_IPNET if it's not defined
Add link-layer types for Fibre Channel FC-2
Add link-layer types for Wireless HART
Add link-layer types for AOS
Add link-layer types for DECT
Autoconf fixes (AIX, HP-UX, OSF/1, Tru64 cleanups)
Install headers unconditionally, and include vlan.h/bluetooth.h if
enabled
Autoconf fixes+cleanup
Support enabling/disabling bluetooth (--{en,dis}able-bluetooth)
Support disabling SITA support (--without-sita)
Return -1 on failure to create packet ring (if supported but
creation failed)
Fix handling of 'any' device, so that it can be opened, and no longer
attempt to open it in Monitor mode
Add support for snapshot length for USB Memory-Mapped Interface
Fix configure and build on recent Linux kernels
Fix memory-mapped Linux capture to support pcap_next() and
pcap_next_ex()
Fixes for Linux USB capture
DLT: Add DLT_LINUX_EVDEV
DLT: Add DLT_GSMTAP_UM
DLT: Add DLT_GSMTAP_ABIS
when routing interrupts instead of cpu_apic_ids[0] since cpu_apic_ids[]
is only populated for multiple-CPU machines. This also matches what the
code does when SMP is not enabled.
PR: bin/151616
Tested by: "Damian S. Kolodziejczyk" damkol | gmail
Submitted by: avg
MFC after: 1 week
