session in multiple threads w/o locking.. There was a single fpu
context shared per session, if multiple threads were using the session,
and both migrated away, they could corrupt each other's fpu context...
This patch adds a per cpu context and a lock to protect it...
It also tries to better address unloading of the aesni module...
The pause will be removed once the OpenCrypto Framework provides a
better method for draining callers into _newsession...
I first discovered the fpu context sharing issue w/ a flood ping over
an IPsec tunnel between two bhyve machines... The patch in D3015
was used to verify that this fix does fix the issue...
Reviewed by: gnn, kib (both earlier versions)
Differential Revision: https://reviews.freebsd.org/D3016
for timehands consumers, by using fences.
Ensure that the timehands->th_generation reset to zero is visible
before the data update is visible [*]. tc_setget() allowed data update
writes to become visible before generation (but not on TSO
architectures).
Remove tc_setgen(), tc_getgen() helpers, use atomics inline [**].
Noted by: alc [*]
Requested by: bde [**]
Reviewed by: alc, bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
seq_write_begin(), instead of the load_rmb/rbm_load functions. The
update does not need to be atomic due to the write lock owned.
Similarly, in seq_write_end(), update of *seqp needs not be atomic.
Only store must be atomic with release.
For seq_read(), the natural operation is the load acquire of the
sequence value, express this directly with atomic_load_acq_int()
instead of using custom partial fence implementation
atomic_load_rmb_int().
In seq_consistent, use atomic_thread_fence_acq() which provides the
desired semantic of ordering reads before fence before the re-reading
of *seqp, instead of custom atomic_rmb_load_int().
Reviewed by: alc, bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
provide a semantic defined by the C11 fences with corresponding
memory_order.
atomic_thread_fence_acq() gives r | r, w, where r and w are read and
write accesses, and | denotes the fence itself.
atomic_thread_fence_rel() is r, w | w.
atomic_thread_fence_acq_rel() is the combination of the acquire and
release in single operation. Note that reads after the acq+rel fence
could be made visible before writes preceeding the fence.
atomic_thread_fence_seq_cst() orders all accesses before/after the
fence, and the fence itself is globally ordered against other
sequentially consistent atomic operations.
Reviewed by: alc
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
However, I've observed the active queue scan stopping when there are
frequent free page shortages and the inactive queue is steadily refilled
by other mechanisms, such as the sequential access heuristic in vm_fault()
or madvise(2). To remedy this problem, record the time of the last active
queue scan, and always scan a number of pages proportional to the time
since the last scan, regardless of whether that last scan was a
timeout-triggered ("pass == 0") or free-page-shortage-triggered ("pass >
0") scan.
Also, on a timeout-triggered scan, allow a full scan of the active queue
when the system is short of inactive pages.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
jail.conf parameters. This flag disallows redefinition of the parameter.
"name" and/or "jid" are automatically defined in jail.conf by using
the jail names at the front of jail parameter definitions. However,
one could override them by using a variable with the same name like
$name = "foo". This confused the parser and could end up with SIGSEGV.
Note that this change also affects a case when all of parameters are
defined in the command line arguments, not in jail.conf. Specifically,
"jail -c name=j1 name=j2" no longer works. This should be harmless.
PR: 196574
Reviewed by: jamie
Differential Revision: https://reviews.freebsd.org/D3017
Start using the gcc sentinel attribute, which can be used to
mark varargs function that need a NULL pointer to mark argument
termination, like execl(3).
Relnotes: yes
Also, the changes made in r272451 and r272653 that were lost in the
merge of 4.6.2 (r276788) have been restored.
PR: 199568
Differential Revision: https://reviews.freebsd.org/D3007
Reviewed by: brooks, hiren
Approved by: jmallett (mentor)
MFC after: 1 month
On platforms which are fully IO-coherent, the map might be null.
We need to guarantee that all data is observable after the
sync operation is called. Add a memory barrier to ensure that on ARM.
Reviewed by: andrew, kib
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3012
in jail.conf. The following did not work correctly:
A="A_${B}_C_${D}"
B="BBBBB"
D="DDDD_${E}_FFFFF"
E="EEEEE"
PR: 189139
Reviewed by: jamie
Differential Revision: https://reviews.freebsd.org/D3018
to be negotiated, it could be a Kerberized mount. As such, filling
in the "principal" argument using the canonized host name makes sense.
If it is negotiated as AUTH_SYS, the "principal" argument is meaningless
but harmless.
Requested by: masato@itc.naist.jp
Tested by: masato@itc.naist.jp
PR: 201073
MFC after: 1 month
for a long time, quota(1) utility supported only PF_INET.
- Clean up confusing changes in f_mntfromname.
- Add an entry for rquotad with rpc/udp6 to inetd.conf.
PR: 194084
The number of available lock list entries for a thread is LOCK_CHILDCOUNT,
and each entry can record up to LOCK_NCHILDREN locks. When iterating over
the locks held by a thread, a bound on the loop index is therefore given
by LOCK_CHILDCOUNT * LOCK_NCHILDREN; WITNESS_COUNT is an unrelated
constant.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D2974
The UEFI loader on the 10.1 release install disk (disc1) modifies an
existing EFI_DEVICE_PATH_PROTOCOL instance in an apparent attempt to
truncate the device path. In doing so it creates an invalid device
path.
Perform the equivalent action without modification of structures
allocated by firmware.
PR: 197641
MFC After: 1 week
Submitted by: Chris Ruffin <chris.ruffin@intel.com>
Place sched_random nearer to where it's first used: moving the
code nearer to where it is used makes the code easier to read
and we can reduce the initial "#ifdef SMP" island.
Reword a little the comment and clean some whitespaces
while here.
The 6205 (Taylor Peak) in the Lenovo X230 works fine in 5GHz 11a and 11n HT20,
but not 11n HT40. The NIC goes RX deaf the moment HT40 is configured.
It's so RX deaf that it doesn't even hear beacons and the firmware sends
"BEACON MISS" events. That's pretty deaf.
I tried configuring up the HT40 flags in monitor mode and it worked - so
I assumed that doing the transition from 20 -> 40MHz channel configuration
when going auth->assoc (ie, after the NIC has been partially configured)
is a problem.
So for now, let's just always set them if they're available.
Tested:
* Intel 5300, STA mode, 5GHz HT/40 AP; 2GHz HT/20 AP
* Intel 6205, STA mode, 5GHz HT/40, HT20, 11a AP; 2GHz HT/20 AP
This was pointed out to me by coworkers trying to use FreeBSD-HEAD
in the office on their Thinkpad T420p laptops.
TODO:
* I don't like how the HT40 flags are configured - the whole interop/
protection config should be re-checked. Notably, I think curhtprotmode
is 0 in a lot of cases, which means "no interoperability" and i think
that's busted.
Sponsored by: Norse Corp, Inc.
