is deasserted. Prior to this change each assertion on a level triggered irq
pin resulted in two interrupts being delivered to the CPU.
Differential Revision: https://reviews.freebsd.org/D1310
Reviewed by: tychon
MFC after: 1 week
sheet, RX filter should be disabled before programming.
Previously it was clearing wrong bits so RX filter was not
disabled in RX filter configuration.
Reported by: brad@OpenBSD.org
Plug a memory leak in libzfs. In zfs_iter_bookmarks, an nvlist is allocated
before calling lzc_get_bookmarks, which allocates the nvlist again (and
overwrites the pointer to previously allocated list).
Illumos issue:
5427 memory leak in libzfs when doing rollback
MFC after: 2 weeks
Convert ARC flags to use enum. Previously, public flags are defined in
arc.h and private flags are defined in arc.c which can lead to confusion
and programming errors.
Consistently use 'hdr' (when referencing arc_buf_hdr_t) instead of 'buf'
or 'ab' because arc_buf_t are often named 'buf' as well.
Illumos issue:
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
MFC after: 2 weeks
Calculate the segment's memory size (p_memsz) using the virtual
addresses, not the file offsets. Otherwise padding preceeding SHT_NOBITS
sections may be excluded from the calculation, resulting in a segment
that is too small.
PR: 195653
Sponsored by: The FreeBSD Foundation
Prior to this change the build could fail as follows, if gperf is not
available (or fails):
- make(1) stops due to the gperf error, but an empty target file
(cfns.h) is still created
- the empty cfns.h is newer than the source cfns.gperf so it is not
regenerated on subsequent builds
- the gcc build fails (undefined reference to libc_name_p)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
the orphaned descendants. Base of the API is modelled after the same
feature from the DragonFlyBSD.
Requested by: bapt
Reviewed by: jilles (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Reviewed by: Michael Tsymbalyuk <mtzaurus@gmail.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Jan Kryl <jan.kryl@nexenta.com>
illumos/illumos-gate@b7070b7dbc
5370 consistent arc_buf_hdr_t naming scheme
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@7adb730b58
Remove "dbuf phys" db->db_data pointer aliases.
Use function accessors that cast db->db_data to the appropriate
"phys" type, removing the need for clients of the dmu buf user
API to keep properly typed pointer aliases to db->db_data in order
to conveniently access their data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
In zap_leaf() and zap_leaf_byteswap, now that the pointer alias
field l_phys has been removed, use the db_data field in an on
stack dmu_buf_t to point to the leaf's phys data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
Remove the db_user_data_ptr_ptr field from dbuf and all logic
to maintain it.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dnode.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dbuf.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
Modify the DMU buf user API to remove the ability to specify
a db_data aliasing pointer (db_user_data_ptr_ptr).
cddl/contrib/opensolaris/cmd/zdb/zdb.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_diff.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_send.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_traverse.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_tx.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_bookmark.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deadlist.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deleg.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_destroy.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_pool.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_scan.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_synctask.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_userhold.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_history.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Create and use the new "phys data" accessor functions
dsl_dir_phys(), dsl_dataset_phys(), zap_m_phys(),
zap_f_phys(), and zap_leaf_phys().
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Remove now unused "phys pointer" aliases to db->db_data
from clients of the DMU buf user API.
Illumos issue:
5314 Remove "dbuf phys" db->db_data pointer aliases in ZFS
MFC after: 2 weeks
In addition to r273158, make the code in spa_sync() that checks if the
current TXG is a no-op TXG less fragile.
Illumos issue:
5347 idle pool may run itself out of space
MFC after: 2 weeks
Add a loader tunable, vfs.zfs.arc_meta_min, which controls how much metadata
ZFS should keep in ARC at minimum.
In arc_evict(), when doing recycle, take more factors into account by
applying the following policy:
1. If no evictable data, evict metadata;
2. If no evictable metadata, evict data;
3. If we hit arc_meta_limit, evict metadata;
4. If we haven't hit arc_meta_min, evict data;
5* (Illumos only, not present in new FreeBSD code, yet) evict the oldest
cached element from data and metadata.
(FreeBSD) evict the data type specified by caller, which is the
existing behavior.
Note that because of our splitted locks (implemented in r205231 to improve
scalability by reducing lock contention), implementing the fifth Illumos
behavior will not be cheap, so for now just implement the 1-4 and fall back
to current behavior for 5.
Illumos issue:
5368 ARC should cache more metadata
MFC after: 2 months (assuming we didn't found better solution)
Commands like 'export -p', 'set' and 'trap', and tracing enabled via 'set
-x' generate output suitable as shell input by adding quotes as necessary.
If there are control characters other than newline or invalid UTF-8
sequences, use $'...' and \OOO to display them safely.
The resulting output is not parsable by a strict POSIX.1-2008 shell but sh
from FreeBSD 9.0 and newer and many other shells can parse it.
Implement vaarg lowering for ppc32. Lowering of scalars and
aggregates is supported. Complex numbers are not.
This adds va_args support for PowerPC (32 bit) to clang.
Reviewed by: jhibbits
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1308
A _NEW flag passed to _init_flags() to avoid check for double-init.
Differential Revision: https://reviews.freebsd.org/D1208
Reviewed by: jhb, wblock
MFC after: 1 Month
Expose arc_meta_limit, et al via kstats.
Note that as a result, vfs.zfs.arc_meta_used is removed.
The existing vfs.zfs.arc_meta_limit sysctl/tunable is retained
with a SYSCTL_PROC wrapper.
Illumos ZFS issues:
3561 arc_meta_limit should be exposed via kstats
Relnotes: yes
MFC after: 2 weeks
feature is to quisce the system before suspend.
Stop is implemented by reusing the thread_single(9) with the special
mode SINGLE_ALLPROC. SINGLE_ALLPROC differs from the existing
single-threading modes by allowing (requiring) caller to operate on
other process. Interruptible sleeps for !TDF_SBDRY threads are
suspended like SIGSTOP does it, instead of aborting the sleep, like
SINGLE_NO_EXIT, to avoid spurious EINTRs on resume.
Provide debugging sysctl debug.stop_all_proc, which causes total stop
and suspends syncer, while waiting for variable reset for resume. It
is used for debugging; should be removed after the real use of the
interface is added.
In collaboration with: pho
Discussed with: avg
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
filesystem specified VFCF_SBDRY flag, i.e. for NFS.
There are two issues with the sleeps. First, applications may get
unexpected EINTR from the disk i/o syscalls. Second, interruptible
sleep allows the stop of the process, and since mount point is
referenced while thread sleeps, unmount cannot free mount point
structure' memory, blocking unmount indefinitely.
Even for NFS, it is probably only reasonable to enable PCATCH for intr
mounts, but this information is currently not available at VFS level.
Reported and tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
creating delayed write buffers belonging to the reclaimed vnode. Put
the buffer cleanup code after inactivation.
Add asserts that ensure that buffer queues are empty and add BO_DEAD
flag for bufobj to check that no buffers are added after the cleanup.
BO_DEAD is only used by INVARIANTS-enabled kernels.
Reported and tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Verify that the block pointer is structurally valid, before attempting to
read it in. It can only be invalid in the case of a ZFS bug, but this
change will help identify such bugs in a more transparent way, by
panic'ing with a relevant message, rather than indexing off the end of an
array or something.
Illumos issue:
5349 verify that block pointer is plausible before reading
MFC after: 2 weeks
Port Illumos 'zfs allow' examples update. While I'm there also fix
a typo.
Illumos issue:
4181 zfs(1m): 'zfs allow' examples in the man page are outdated
MFC after: 2 weeks
Reduce scrub activities when system there is enough dirty data, namely when
dirty data is more than zfs_vdev_async_write_active_min_dirty_percent (once
we start to increase the number of concurrent async writes).
While there also correct rounding error which would make scrub end up
pausing for (zfs_txg_timeout + 1) seconds instead of the desired
zfs_txg_timeout seconds.
Illumos issue:
5351 scrub goes for an extra second each txg
5352 scrub should pause when there is some dirty data
MFC after: 2 weeks
If zio_checksum_error() returns other than ECKSUM (e.g. EINVAL), it does not
fill in the "zio_bad_cksum_t *info" parameter. Caller should not attempt to
use it in this case.
Illumos issue:
5348 zio_checksum_error() only fills in info if ECKSUM
MFC after: 2 weeks
If a dnode has a spill block and there is an error while accessing
a data block then traverse_dnode() loses information about that error
and returns a status of visiting the spill block.
This issue is discovered by Spectra Logic.
Illumos issue:
5311 traverse_dnode may report success when it should not
Original author: gibbs
MFC after: 2 weeks
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
