This was a leftover from when we had both i386 a.out and ELF.
Reviewed by: kib, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2591
This removes one of the frequent causes of ABI breakage when new CPU
types are added to hwpmc(4).
Differential Revision: https://reviews.freebsd.org/D2586
Reviewed by: davide, emaste, gnn (earlier version)
MFC after: 2 weeks
and qone[f]() were marked as __inline, but their forward
declarations were not updated. Fix the forward declarations
to match the actual function declarations.
Requested by: bde
to handle per-thread information. Since our pthread_setspecific()
implementation calls calloc(3) to allocate per-thread specific data
storage, things get complicated.
Switch the allocator to use bare mmap(2). There is some loss of the
allocated page, since e.g. on amd64, PTHREAD_KEYS_MAX * sizeof(struct
pthread_specific_elem) is 3K (it actually spans whole page due to
padding), but I believe it is more acceptable than additional code for
specialized allocator().
The alternatives would either to make the specific data array be part of
the struct thread, or use internal bindings to call the libc malloc,
avoiding interposing.
Also do the style pass over the thr_spec.c, esp. simplify the
conditionals nesting by returning early when an error detected.
Remove trivial comments.
Found by: yuri@rawbw.com
PR: 200138
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Highlights:
- Fix man page markup, whitespace, and typos
- Fix sh_info of SHT_GROUP section to point to the correct string
- Improve validation in readelf and elfcopy/strip
- Handle DWARF 4's DW_AT_high_pc in addr2line
Sponsored by: The FreeBSD Foundation
The appropriate subdirectories are handled by lib/csu/Makefile. There's
no need to duplicate this logic in Makefile.inc1 and lib/Makefile.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2523
to handle the ARM conditional execution.
While here fix a bug found by this in the hard-float code, cc is the
opposite of cs. The former is used for 'less than' in floating-point code
and is executed when the C (carry) bit is clear, the latter is used when
greater than, equal, or unordered, and is executed when the C bit is set.
Introduce further adjustments to the renaming of libmd
symbols: make sure that we do not generate dangling weak
aliases, as this causes build failures on MIPS.
Tested by: sbruno
(Makefile.inc1): add dependency of xinstall on libmd to
avoid failure of parallel bootstrap.
(lib/libmd/*.h): do not redefine symbols if already
defined as macros (libcrypt uses the same sources internally,
redefining symbols with a prefix of its own).
Fixes build failures caused by previous change to libmd.
Reported by: ian
Pointy hat to: thomas
recv() and send()'s calls to recvfrom() and sendto() are much like
waitpid()'s call to wait4(), and likewise need not allow PLT interposing on
the called function.
Add a prefix to all symbols in libmd to avoid incompatibilites
with same-named, but not binary compatible, symbols from libcrypto.
Also introduce Weak aliases to avoid the need to rebuild dependent
binaries and a major version bump.
PR: 199119
Differential Revision: D2216
Reviewed by: roberto, delphij
MFC after: 2 weeks
Prior to this change both functions returned 0 for success, -1 for failure
and +1 to indicate that an exception was injected into the guest.
The numerical value of ERESTART also happens to be -1 so when these functions
returned -1 it had to be translated to a positive errno value to prevent the
VM_RUN ioctl from being inadvertently restarted. This made it easy to introduce
bugs when writing emulation code.
Fix this by adding an 'int *guest_fault' parameter and setting it to '1' if
an exception was delivered to the guest. The return value is 0 or EFAULT so
no additional translation is needed.
Reviewed by: tychon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D2428
as seek to teh last location saved will still work. This is needed for Samba
to be able to correctly handle delete requests from windows. This does not
completely fix seekdir when deletes are present but fixes the worst of the
problems. The real solution must involve some changes to the API for eh VFS
and getdirentries(2).
Obtained from: Panzura inc
MFC after: 1 week
Now when a lib is marked as PRIVATELIB it is renamed into libprivate$foo instead
of being installed in /usr/lib/private and playing with rpath.
Also allow to install headers for PRIVATELIBS in that case the headers will be
installed in /usr/include/private/$foo
Keep the headers under a private namespace to prevent third party build system
to easily find them to ensure they are only used on purpose.
This allows for non base applications to statically link against a library in
base which is linked to a privatelib
Treating PRIVATELIBS as regular libraries allows to push them into our current
compatX packages if needed.
While here finish promotion of libevent as PRIVATELIB
Install header for bsdstat and libucl
Differential Revision: https://reviews.freebsd.org/D2365
Reviewed by: brooks, des
Discussed with: imp
- Note that ftruncate(2) can operate on shared memory objects and cross
reference shm_open(2).
- Note that ftruncate(2) does not change the file position pointer (aka
seek pointer) of the file descriptor.
- ftruncate(2) will fail with EINVAL for all sorts of other fd types than
just sockets, so instead note that it fails for all but regular files and
shared memory objects.
- Note that ftruncate(2) also appeared in 4.2BSD along with truncate(2).
(Or at least the manpage for both appeared in 4.2, I did not check the
kernel code itself to see if either predated 4.2.)
PR: 199472 (2)
Submitted by: andrew@ugh.net.au (2)
MFC after: 1 week
domain, not a file descriptor. Use 'domain' instead of the original 'd'
for this argument to match socket(2).
PR: 199491
Reported by: sp55aa@qq.com
MFC after: 1 week
multiple values using the same key in a nvlist.
Approved by: pjd (mentor)
Obtained from: WHEEL Systems (http://www.wheelsystems.com)
Update man page.
Reviewed by: AllanJude
Approved by: pjd (mentor)
Change the nvlist_recv() function to take additional argument that
specifies flags expected on the received nvlist. Receiving a nvlist with
different set of flags than the ones we expect might lead to undefined
behaviour, which might be potentially dangerous.
Update consumers of this and related functions and update the tests.
Approved by: pjd (mentor)
Update man page for nvlist_unpack, nvlist_recv, nvlist_xfer, cap_recv_nvlist
and cap_xfer_nvlist.
Reviewed by: AllanJude
Approved by: pjd (mentor)
Add a manpage for it, assign the copyright to the OpenBSD project on it since it
is mostly copy/paste from OpenBSD manpage.
style(9) fixes
Differential Revision: https://reviews.freebsd.org/D2420
Reviewed by: kib
Those functions are problematic, because there is no way to report
memory allocation problems without complicating the API, so we can
either abort or potentially return invalid results. None of which is
acceptable.
In most cases the caller knows the size of the name, so he can allocate
buffer on the stack and use snprintf(3) to prepare the name.
After some discussion the conclusion is to removed those functions,
which also simplifies the API.
Discussed with: pjd, rstone
Approved by: pjd (mentor)
MACHINE_CPUARCH or MACHINE_ARCH, not MACHINE. The latter is for kernel
only things. Also, I think this should be unconditional since all our
architectures have long double support, but I don't have time to test
that thoroughly so just add a comment to that effect.
The conditional came from NetBSD, where only select architectures have this
header/support
All architectures on FreeBSD have the necessary support though, so the
conditional's completely unnecessary
make tinderbox done on all architectures (including arm64, where the issue
occurred before) this time
X-MFC with: r282057, r282092
MFC after: 6 days
Obtained from: https://github.com/Juniper/libxo/tree/0.3.2
Requested by: Phil Shafer <phil@juniper.net>
This import incorporates local change 279966.
Local change 276260 has been merged-in.
than 0 in MDXFileChunk when calculating the checksum
This edgecase can be triggered if the file is truncated while the checksum
is being calculated (i.e. the EOF is reached)
Differential Revision: https://reviews.freebsd.org/D2351 (patch by darius)
PR: 196694
Reviewed by: delphij, ngie
Submitted by: Daniel O'Connor <darius@dons.net.au>
Sponsored by: EMC / Isilon Storage Division
Fix a missing .h and change the recommended include for the POSIX2008 functions from xlocale.h to locale.h. Including xlocale.h is for legacy / Darwin compatibility so should not be encouraged.
This should be a non-functional change. A future change should
address the functional differences between these three and converge
on a single source.
Differential Revision: https://reviews.freebsd.org/D2058
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
* Add VCREAT flag to indicate when a new file is being created
* Add VVERIFY to indicate verification is required
* Both VCREAT and VVERIFY are only passed on the MAC method vnode_check_open
and are removed from the accmode after
* Add O_VERIFY flag to rtld open of objects
* Add 'v' flag to __sflags to set O_VERIFY flag.
Submitted by: Steve Kiernan <stevek@juniper.net>
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/27
Relnotes: yes
kernel, but keep explanation of the old ps_strings structure to make
it clear what sanity check tries to accomplish.
Noted by: Oliver Pinter <oliver.pinter@hardenedbsd.org>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This supports e500v1, e500v2, and e500mc. Tested only on e500v2, but the
performance counters are identical across all, with e500mc having some
additional events.
Relnotes: Yes
waitid() function is required to be cancellable by the standard. The
wait6() and ppoll() follow the other syscalls in their groups.
Reviewed by: jhb, jilles (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
SHA256 would make libarchive based application to give:
archive_read_extract(): Lzma library error: Corrupted input data
(Internally this is LZMA_DATA_ERR)
However, the libmd version of SHA256 is supposed to give same result
as the bundled version do, and xz(1) is not affected.
As a precaution, revert the SHA256 portion of r281316 for now until
we figure out why it breaks libarchive interoperability as we can't
yet rule out this change have introduced an ABI breakage.
While here fix missing link to libbsdxml for libmt
Fix overlinking in mt(1)
Make add an indirect libmt dependency on bsdxml to allow static linking if
needed
- Update xz to 5.2.1, where the most visible change is that it
fixed a compression-ratio regression in fast mode LZMA1 and
LZMA2 and used cpuset_getaffinity() for CPU cores detection.
- Make liblzma use the base system SHA256 implementation instead of
the bundled one.
- Additional annotation in config.h for FreeBSD specific tweaks.
- Refresh symbols in XZprivate_1.0 to reflect reality.
Relnotes: yes
MFC after: 1 month (TBD)
Other architectures do not use quad precision long double and don't need
these runtime support routines.
Differential Revision: https://reviews.freebsd.org/D2252
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
These are long integer (di_int/du_int) to quad precision floating point
conversions. They may be reworked based on upstream discussion. These
versions are here to support arm64 world builds.
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2174
This may be reworked based on upstream discussion. This version is here
to support arm64 world builds.
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2173
dependent functions have been implemented, but this is enough for world.
Differential Revision: https://reviews.freebsd.org/D2132
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
These are similar to the mips24k performance counters - some are
available on perfcnt0/3, some are available on perfcnt1/4.
However, the events aren't all the same.
* Add the events, named the same as from Linux oprofile.
* Verify they're the same as "MIPS32(R) 74KTM Processor Core Family
Software User's Manual"; Document Number: MD00519; Revision 01.05.
* Rename INSTRUCTIONS to something else, so it doesn't clash with
the alias INSTRUCTIONS. I'll try to tidy this up later; there
are a few other aliases to add and shuffle around.
Tested:
* QCA9558 SoC (AP135 board) - MIPS74Kc core (no FPU.)
* make universe; where it didn't fail for other reasons.
TODO:
* It'd be nice to support the four performance counters
in at least this hardware, rather than just two.
Reviewed by: bsdimp ("looks good; don't break world".)
When following symlinks, fts returned FTS_SLNONE when fstatat(flag=0)
failed, but a subsequent fstatat(flag=AT_SYMLINK_NOFOLLOW) succeeded. This
incorrectly triggered if a filename existed to be read from the directory,
was deleted before the fstatat(flag=0) and created again after the
fstatat(flag=0).
Fix this by only returning FTS_SLNONE if the result from
fstatat(flag=AT_SYMLINK_NOFOLLOW) is actually a symlink. If it is not a
symlink, treat it as if fstatat(flag=0) succeeded.
PR: 196724
Reported and tested by: pho
MFC after: 1 week
stage, just like for the regular world stage.
Reviewed by: rodrigc, imp, bapt, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D2187
Both .weak and .alias assembler directives only work when assembling
the file which defines the symbol.
Reported and tested by: andrew
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
%rdi, %rsi, etc are inadvertently bypassed along with the check to
see if the instruction needs to be repeated per the 'rep' prefix.
Add "MOVS" instruction support for the 'MMIO to MMIO' case.
Reviewed by: neel
Per Austin group issue #884, sh should not import IFS from the environment
but always set it to $' \t\n'. For wordexp(), however, it is documented and
useful for it to use IFS from the environment.
Since sh currently imports IFS from the environment, this change has no
functional effect.
MFC after: 1 week
Note that to cancel blocked kevent(2) call, changelist must be empty,
since we cannot cancel a call which already made changes to the
process state. And in reverse, call which only makes changes to the
kqueue state, without waiting for an event, is not cancellable. This
makes a natural usage model to migrate kqueue loop to support
cancellation, where existing single kevent(2) call must be split into
two: first uncancellable update of kqueue, then cancellable wait for
events.
Note that this is ABI-incompatible change, but it is believed that
there is no cancel-safe code that relies on kevent(2) not being a
cancellation point. Option to preserve the ABI would be to keep
kevent(2) as is, but add new call with flags to specify cancellation
behaviour, which only value seems to add complications.
Suggested and reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This fixes C++ libraries not implicitly linking in libc++. This is
generally not an issue because the final linking with the compiled binary
will involve CXX via PROG_CXX or other means. It is however
inconsistent with libraries implicitly linking in libc and problematic
for trying to build libraries with '-z defs' to ensure all direct
dependencies are linked in.
libatf-c++ is currently the only consumer of this new feature.
Differential Revision: https://reviews.freebsd.org/D2039
Reviewed by: imp
Discussed with: bapt
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Refactor float to integer conversion to share the same code.
80bit Intel/PPC long double is excluded due to lacking support
for the abstraction. Consistently provide saturation logic.
Extend to long double on 128bit IEEE extended platforms.
Initial patch with test cases from GuanHong Liu.
Reviewed by Steve Canon.
Differential Revision: http://reviews.llvm.org/D2804
Pull in r232107 from upstream compiler-rt trunk (by Ed Maste):
Use signed int implementation for __fixint
Requested by: emaste
redzone below the stack pointer for scratch space and requires
interrupt and signal frames to avoid overwriting it. However, EFI uses
the Windows ABI which does not support this. As a result, interrupt
handlers in EFI push their interrupt frames directly on top of the
stack pointer. If the compiler used the red zone in a function in the
EFI loader, then a device interrupt that occurred while that function
was running could trash its local variables. In practice this happens
fairly reliable when using gzipfs as an interrupt during decompression
can trash the local variables in the inflate_table() function
resulting in corrupted output or hangs.
Fix this by disabling the redzone for amd64 EFI binaries. This
requires building not only the loader but any libraries used by the
loader without redzone support.
Thanks to Jilles for pointing me at the redzone once I found the stack
corruption.
Differential Revision: https://reviews.freebsd.org/D2054
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Cisco Systems, Inc.
should raise a divide-by-zero floating point exception for x = +-0
and an invalid floating point exception for x < 0 including x = -Inf.
Update the code to raise the exception and update the documentation
with hopefully better description of the behavior.
Reviewed by: bde (code only)
The MEM_UOPS_RETIRED actually work the same way as the Sandy
Bridge counters, but the counters were documented in a different
way and that seemed to cause the Ivy Bridge counters to be
implemented incorrectly. Use the same counter definitions as
Sandy Bridge. While I'm here, rename the counters to match
what's documented in the datasheet.
Differential Revision: https://reviews.freebsd.org/D1590
MFC after: 1 month
Sponsored by: Sandvine Inc.
On Sandy Bridge and later, to count branch-related events you
have to or together a mask indicating the type of branch
instruction to count (e.g. direct jump, branch, etc) and a bits
indicating whether to count taken and not-taken branches. The
current counter definitions where defining this bits individually,
so the counters never worked and always just counted 0.
Fix the counter definitions to instead contain the proper
combination of masks. Also update the man pages to reflect the
new counters.
Differential Revision: https://reviews.freebsd.org/D1587
MFC after: 1 month
Sponsored by: Sandvine Inc.
confusion, the _setjmp.S in libstand was never being used and was instead
being shadowed by the libc version. Since the libc version now uses FPRs,
it caused loader to crash.
This should also save and restore non-volatile Altivec registers, but that
needs to wait on solving two problems:
1. Adding the nonvolatile vector registers means we need 5 more than _JBLEN
entries in jmp_buf on 32-bit targets (64-bit is OK).
2. Need to figure out how to determine if saving/restoring vector regs
is supported on the current CPU from userland.
MFC after: 1 month
When a gpiobus child is added, use its name to identify the mapped pin
names.
Make the respective changes to libgpio.
Add a new '-n' flag to gpioctl(8) to set the pin name.
Differential Revision: https://reviews.freebsd.org/D2002
Reviewed by: rpaulo
Requested by: many
Implement a small enhancement to the original qsort implementation:
If the data is 32 bit aligned we can side-step the long type
version and use int instead.
The change brings a modest but significant improvement in
32 bit workloads.
Relnotes: yes
PR: 135718
Taken from: ache
As it turns out, the density code for DAT-160 (0x48) is the same
as for SDLT220. Since the SDLT values are already in the table,
we will leave them in place.
Thanks to Harald Schmalzbauer for confirming the DAT-72 density code.
lib/libmt/mtlib.c:
Add DAT-72 density code, and commented out DAT-160 density
code. Explain why DAT-160 is commented out. Add notes
explaining where the bpi values for these formats came from.
usr.bin/mt/mt.1:
Add DAT-72 density code, and add a note explaining that
the SDLTTapeI(110) density code (0x48) is the same as
DAT-160.
Sponsored by: Spectra Logic
MFC after: 3 weeks
