1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-10-19 02:29:40 +00:00
Commit Graph

247217 Commits

Author SHA1 Message Date
Bjoern A. Zeeb
1459a8eb24 Run netoptions startup script in vnet jails.
People use rc.conf inside vnet jails to configure networking setups.
Presumably because some sysctl were not virtualised up until r356527 the
script was not run for vnet jails leaving the rc.conf options without
effect for non-obvious reasons.  Run the netoptions startup script also
for VNET jails now to make the rc.conf options work.

PR:		243193
MFC after:	2 weeks
2020-01-08 23:34:50 +00:00
Bjoern A. Zeeb
334fc5822b vnet: virtualise more network stack sysctls.
Virtualise tcp_always_keepalive, TCP and UDP log_in_vain.  All three are
set in the netoptions startup script, which we would love to run for VNETs
as well [1].

While virtualising the log_in_vain sysctls seems pointles at first for as
long as the kernel message buffer is not virtualised, it at least allows
an administrator to debug the base system or an individual jail if needed
without turning the logging on for all jails running on a system.

PR:		243193 [1]
MFC after:	2 weeks
2020-01-08 23:30:26 +00:00
Ian Lepore
e371a9e6cc Remove some trailing whitespace; no functional changes. 2020-01-08 23:06:13 +00:00
Ian Lepore
ca16c2b8de Split the code to find and add iicbus children out to its own function.
Move the decision to take an early exit from that function after adding
children based on FDT data into the #ifdef FDT block, so that it doesn't
offend coverity's notion of how the code should be written.  (What's the
point of compilers optimizing away dead code if static analyzers won't
let you use the feature in conjuction with an #ifdef block?)

Reported by:	coverity via vangyzen@
2020-01-08 23:03:47 +00:00
Vincenzo Maffione
332eff95e3 bhyve: add wrapper for debug printf statements
Add printf() wrapper to use CR/CRLF terminators depending on whether
stdio is mapped to a tty open in raw mode.
Try to use the wrapper everywhere.
For now we leave the custom DPRINTF/WPRINTF defined by device
models, but we may remove them in the future.

Reviewed by:	grehan, jhb
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D22657
2020-01-08 22:55:22 +00:00
Ian Lepore
a5910414d4 Change some KASSERT to device_printf + return EINVAL. There's no need to
bring the whole kernel down due to a configuration error detected when a
module is loaded, it suffices to just not attach the device.
2020-01-08 22:48:14 +00:00
Ian Lepore
b29fdcf8b3 Init sc->maxbus to -1, not 0. It represents the highest array index that
has a non-NULL child bus stored in it, so the "none" value can't be zero
since that's a valid array index.  Also, when adding all possible buses
because there is no specific per-bus config, there's no need to reset
sc->maxbus on each loop iteration, it can be set once after the loop.
2020-01-08 22:45:32 +00:00
John Baldwin
ec212149ad Remove no-longer-used function prototype.
Reported by:	amd64-gcc
2020-01-08 22:16:26 +00:00
Ian Lepore
d9b35549d4 Ensure any reserved gpio pins get released if an early exit is taken
from the attach function.
2020-01-08 22:06:31 +00:00
Ed Maste
305f30cc29 Retire build support for GCC's DWARF unwinder
As of r356514 LLVM's libunwind is used as the DWARF unwinder on all
supported CPU architectures, and GCC and its libraries will be removed
soon.  Retire the build infrastructure for GCC's unwinder; from here
if there are any unwinder bugs (on any arch) the path forward is to fix
LLVM's libunwind.
2020-01-08 21:07:55 +00:00
Ed Maste
7c88377010 Remove prereq lib support for GNU unwinder
LLVM's libunwind is used for all archs, as of r356514.  As GCC 4.2.1
will soon be removed, and with it the GNU unwinder, start simplifying
the prereq/startup lib logic in Makefile.inc1.  From here if there are
any unwinder bugs (on any arch) the path foward is to fix LLVM's
libunwind.
2020-01-08 20:56:30 +00:00
Ed Maste
3b957e38ef src.opts.mk: Remove sparc64 LLVM_LIBUNWIND BROKEN_OPTIONS
After r356513 it should build.
2020-01-08 20:51:07 +00:00
Ed Maste
b05bd0b93b src.opts.mk: enable LLVM_UNWIND by default for all archs
Only sparc64 did not enable LLVM_LIBUNWIND. After r356513 LLVM_LIBUNWIND
should at least build on sparc64. The old DWARF unwinder will be removed
along with GCC 4.2.1 in the near future, so switch sparc64 to use LLVM's
unwinder in advance of the removal.  Someone with access to the obsolete
sparc64 hardware supported by FreeBSD will have to test, and investigate
any failures. I will gladly help, but I don't have any suitable hardware
myself.

PR:		233405
2020-01-08 20:45:18 +00:00
Ed Maste
7cf3f9952d libunwind: untested attempt to fix sparc64 build
sparc64 is the only architecture currently using the DWARF unwinder from
GCC 4.2.1.  Old GCC and related libraries are being removed soon; absent
other changes sparc64 would be left with no unwinder when that happens.

Instead, commit these changes which should at least allow the LLVM
unwinder to build.  Someone with access to the obolete sparc64 hardware
supported by FreeBSD will need to test the result.

PR:		233405
Submitted by:	cem
2020-01-08 20:37:03 +00:00
Kyle Evans
f10405323a posixshm: implement posix_fallocate(2)
Linux expects to be able to use posix_fallocate(2) on a memfd. Other places
would use this with shm_open(2) to act as a smarter ftruncate(2).

Test has been added to go along with this.

Reviewed by:	kib (earlier version)
Differential Revision:	https://reviews.freebsd.org/D23042
2020-01-08 19:08:44 +00:00
Kyle Evans
7ce4072267 Bump __FreeBSD_version after r356510
linuxkpi kmod would need to rebuilt at a minimum; fileops layout has
changed.
2020-01-08 19:06:22 +00:00
Kyle Evans
2856d85ecb posix_fallocate: push vnop implementation into the fileop layer
This opens the door for other descriptor types to implement
posix_fallocate(2) as needed.

Reviewed by:	kib, bcr (manpages)
Differential Revision:	https://reviews.freebsd.org/D23042
2020-01-08 19:05:32 +00:00
John Baldwin
f57d4d4641 Remove unneeded cdevsw methods and D_NEEDGIANT.
Reviewed by:	kib
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D23079
2020-01-08 19:05:23 +00:00
John Baldwin
efb7929173 Use falloc_noinstall + finstall for crypto file descriptors.
Reviewed by:	cem, kib
MFC after:	1 week
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D23078
2020-01-08 19:03:24 +00:00
John Baldwin
d2cdaed130 Add a reference count to cryptodev sessions.
This prevents use-after-free races with crypto requests (which may
sleep) and CIOCFSESSION as well as races from current CIOCFSESSION
requests.

admbugs:	949
Reported by:	Yuval Kanarenstein <yuvalk@ssd-disclosure.com>
Reviewed by:	cem
MFC after:	1 week
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D23077
2020-01-08 18:59:23 +00:00
Alexander Motin
b2cdfb72f4 Fix copy-paste bug in HMB free code.
MFC after:	2 weeks
X-MFC-with:	r356474
2020-01-08 18:26:23 +00:00
Ed Maste
4cee74df63 src.conf.5: regen after r356423 and r356499
riscv now using Clang/lld, riscv64sf reenabled, and googletest adjusted
to avoid only the affected fuse test on mips
2020-01-08 17:54:44 +00:00
John Baldwin
79f5991559 Add -mno-relax to CFLAGS in bsd.prog/lib.mk instead of bsd.cpu.mk.
bsd.cpu.mk is included by bsd.init.mk before bsd.linker.mk, so it
was always setting the flag since LINKER_FEATURES wasn't defined.

Reported by:	mhorne
Reviewed by:	imp, mhorne
Sponsored by:	DARPA
Differential Revision:	https://reviews.freebsd.org/D23076
2020-01-08 17:49:34 +00:00
Konstantin Belousov
f26c30a5f3 rtld: fix after r356300
binpath local was changed from char array to a char pointer, update
strlcpy/strlcat uses.

Reported by:	Coverity through vangyzen
CID:	1412239 and 1412240
Reviewed by:	emaste, imp, vangyzen
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Differential revision:	https://reviews.freebsd.org/D23090
2020-01-08 17:37:20 +00:00
John Baldwin
778b62251c Add notes for MAKE_OBSOLETE_GCC going away and riscv switching to clang/lld. 2020-01-08 17:31:54 +00:00
John Baldwin
8d1df20821 Remove a mention of MAKE_OBSOLETE_GCC.
This should have been included in r356452.
2020-01-08 17:31:18 +00:00
John Baldwin
e48503fffd Use clang and lld as the default toolchain for RISCV.
- Enable clang and lld as system toolchains.
- Don't use external GCC for universe by default.
- Re-enable riscv64sf since it builds fine with clang + lld.

Reviewed by:	emaste, mhorne
Relnotes:	yes
Sponsored by:	DARPA
Differential Revision:	https://reviews.freebsd.org/D23089
2020-01-08 17:25:59 +00:00
Mark Johnston
f8091e2c8f linprocfs: Fix some bugs in the maps file implementation.
- Export the offset into the backing object, not the object size.
- Fix a bug where we would print the previous entry's "offset" when a
  map_entry has no object.
- Try to identify shared mappings.  Linux prints "s" when the mapping
  "may be shared".  This attempt is not perfect, for example, we print
  "p" for anonymous memory that may be shared via
  minherit(INHERIT_SHARE).

PR:		240992
Reviewed by:	kib
MFC after:	1 week
MFC note:	no OBJ_ANON in stable/12
Differential Revision:	https://reviews.freebsd.org/D23062
2020-01-08 16:57:08 +00:00
Maxim Konovalov
4a3c7e6718 o Spell "Redundancy" and "Remember" correctly.
PR:		243187
Submitted by:	mikael.urankar@gmail.com (partially)
2020-01-08 14:01:15 +00:00
Emmanuel Vadot
650a41c6d0 regulator: fix regnode_method_get_voltage
This method is supposed to write the voltage into uvolt
and return an errno compatible value.

Reviewed by:	mmel
Differential Revision:	https://reviews.freebsd.org/D23006
2020-01-08 11:30:42 +00:00
Emmanuel Vadot
546652fbe3 rk805: Add regnode_status method
This allow consumers to check if the regulator is enable or not.

Reviewed by:	mmel
Differential Revision:	https://reviews.freebsd.org/D23005
2020-01-08 11:30:03 +00:00
Emmanuel Vadot
d194b63134 rk808: Add min/max for the switch regulators
The two switch regulator are always 3.0V.
Add a special case in get_voltage that if min=max we directly
return the value without calculating it.

Reviewed by:	mmel
Differential Revision:	https://reviews.freebsd.org/D23004
2020-01-08 11:29:22 +00:00
Kristof Provost
29bfe2102d vtnet: Pre-allocate debugnet data immediately
Don't wait until the vtnet_debugnet_init() call happens, because at that
point we might already have allocated something from
vtnet_tx_header_zone.

Some systems showed this panic:

        vtnet0: link state changed to UP
        panic: keg vtnet_tx_hdr initialization after use.
        cpuid = 5
        time = 1578427700
        KDB: stack backtrace:
        db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe004db427f0
        vpanic() at vpanic+0x17e/frame 0xfffffe004db42850
        panic() at panic+0x43/frame 0xfffffe004db428b0
        uma_zone_reserve() at uma_zone_reserve+0xf6/frame 0xfffffe004db428f0
        vtnet_debugnet_init() at vtnet_debugnet_init+0x77/frame 0xfffffe004db42930
        debugnet_any_ifnet_update() at debugnet_any_ifnet_update+0x42/frame 0xfffffe004db42980
        do_link_state_change() at do_link_state_change+0x1b3/frame 0xfffffe004db429d0
        taskqueue_run_locked() at taskqueue_run_locked+0x178/frame 0xfffffe004db42a30
        taskqueue_run() at taskqueue_run+0x4d/frame 0xfffffe004db42a50
        ithread_loop() at ithread_loop+0x1d6/frame 0xfffffe004db42ab0
        fork_exit() at fork_exit+0x80/frame 0xfffffe004db42af0
        fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe004db42af0
        --- trap 0, rip = 0, rsp = 0, rbp = 0 ---
        KDB: enter: panic
        [ thread pid 12 tid 100011 ]
        Stopped at      kdb_enter+0x37: movq    $0,0x1084eb6(%rip)
        db>

Reviewed by:	cem, markj
Differential Revision:	https://reviews.freebsd.org/D23073
2020-01-08 10:06:32 +00:00
Michal Meloun
2138e99bf5 Switch 32-bit arm back to LLVM libunwind.
Actual LLVM libunwind passed all testing without issues, switch back to it.

PR:	233664
2020-01-08 07:25:37 +00:00
Alexander Motin
6de4e458fa Minor adjustments to r356474 and r356480.
Reported by:	jkim, imp
MFC after:	2 weeks
X-MFC-with:	r356474
2020-01-07 23:29:54 +00:00
John Baldwin
f39b4f8899 Work around lld's inability to handle undefined weak symbols on risc-v.
lld on RISC-V is not yet able to handle undefined weak symbols for
non-PIC code in the code model (medany/medium) used by the RISC-V
kernel.

Both GCC and clang emit an auipc / addi pair of instructions to
generate an address relative to the current PC with a 31-bit offset.
Undefined weak symbols need to have an address of 0, but the kernel
runs with PC values much greater than 2^31, so there is no way to
construct a NULL pointer as a PC-relative value.  The bfd linker
rewrites the instruction pair to use lui / addi with values of 0 to
force a NULL pointer address.  (There are similar cases for 'ld'
becoming auipc / ld that bfd rewrites to lui / ld with an address of
0.)

To work around this, compile the kernel with -fPIE when using lld.
This does not make the kernel position-independent, but it does
force the compiler to indirect address lookups through GOT entries
(so auipc / ld against a GOT entry to fetch the address).  This
adds extra memory indirections for global symbols, so should be
disabled once lld is finally fixed.

A few 'la' instructions in locore that depend on PC-relative
addressing to load physical addresses before paging is enabled have to
use auipc / addi and not indirect via GOT entries, so change those to
use 'lla' which always uses auipc / addi for both PIC and non-PIC.

Submitted by:	jrtc27
Sponsored by:	DARPA
Differential Revision:	https://reviews.freebsd.org/D23064
2020-01-07 23:18:31 +00:00
Alexander Motin
1c7dd40e58 Increate HMB limit from 1% to 5%.
SSD capacity in laptops is growing faster then RAM size, so my original
guess seems too low on second thought.  Hopefully nobody will build large
array of those crappy SSDs.

MFC after:	2 weeks
X-MFC-with:	356474
2020-01-07 23:10:38 +00:00
Brandon Bergren
6f5bc35d94 [PowerPC] Fix libllvmminimal build when building from powerpc64 ELFv1.
When bootstrapping on powerpc64 ELFv1, it is necessary to use binutils
ld.bfd from ports for the bootstrap, as this is the only modern linker for
ELFv1 host tools.

As binutils ld.bfd is rather strict in its handling of undefined symbols,
it is necessary to pull in Support/Atomic.cpp to avoid an undefined symbol.

Reviewed by:	dim, emaste
Sponsored by:	Tag1 Consulting, Inc.
Differential Revision:	https://reviews.freebsd.org/D23072
2020-01-07 22:45:02 +00:00
John Baldwin
0840c1db16 Don't fail universe kernel stage for TARGET_ARCHes without a kernel config.
This fixes a regression in r356418 where the entire universe would
fail early due to an undefined make target when a given TARGET_ARCH
had no associated kernel configs.  This is true for all of the
hard-float mips TARGET_ARCHes currently.

Pointy hat to:	me
Reviewed by:	emaste
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D23071
2020-01-07 21:56:28 +00:00
Mark Johnston
938acb0869 Use a deterministic hash for USDT symbol names.
Previously libdtrace used ftok(3), which hashes the inode number of the
input object file.  To increase reproducibility of builds that embed
USDT probes, include a hash of the object file path in the symbol name
instead.

Reported and tested by:	bdrewery
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2020-01-07 21:56:20 +00:00
Mark Johnston
accd6aa25e libjail: Handle an error from reallocarray() when trimming the buffer.
There is no API guarantee that realloc() will not fail when the buffer
is shrinking.  Handle it by simply returning the untrimmed buffer.
While this is unlikely to ever happen in practice, it seems worth
handling just to silence static analyzer warnings.

PR:		243106
Submitted by:	Hans Christian Woithe <chwoithe@yahoo.com>
MFC after:	1 week
2020-01-07 21:44:27 +00:00
Gleb Smirnoff
e9edde4110 Fix a typo - passing wrong mbuf pointer to needs_udp_csum(). Will
trigger panic only on a kernel with RATELIMIT.

Submitted by:	rrs
2020-01-07 21:29:42 +00:00
Alexander Motin
67abaee9fc Add Host Memory Buffer support to nvme(4).
This allows cheapest DRAM-less NVMe SSDs to use some of host RAM (about
1MB per 1GB on the devices I have) for its metadata cache, significantly
improving random I/O performance.  Device reports minimal and preferable
size of the buffer.  The code limits it to 1% of physical RAM by default.
If the buffer can not be allocated or below minimal size, the device will
just have to work without it.

MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	iXsystems, Inc.
2020-01-07 21:17:11 +00:00
Alexander V. Chernikov
e02d3fe70c Fix rtsock route message generation for interface addresses.
Reviewed by:	olivier
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D22974
2020-01-07 21:16:30 +00:00
Ian Lepore
9a1d4b0012 Add #ifdef option-test wrappers around another call to an arm/unwind.c
function which is only compiled-in with certain options.

Why is it always the most trivial part of a big commit that takes 3 tries
to get right?
2020-01-07 21:13:34 +00:00
Mateusz Guzik
a9a047bc87 vfs: handle doomed vnodes in vdefer_inactive
vgone dooms the vnode while keeping VI_OWEINACT set and then drops the
interlock.

vputx can pick up the interlock and pass it to vdefer_inactive since the
flag is set.

The race is harmless, just don't defer anything as vgone will take care of it.

Reported by:	pho
2020-01-07 20:24:21 +00:00
Kyle Evans
241972461f Remove gcclibs libssp build glue
r356356 started providing libssp based on ^/lib/libc/secure and disconnected
this version from the build. This one did formally provide runtime support
for _FORTIFY_SOURCE, but FreeBSD lacks the build support that would have
been needed to take advantage of it.

MFC after:	never
2020-01-07 19:49:31 +00:00
Ed Maste
ee92463aca Do not define TCPOUTFLAGS in rack_bbr_common
tcp_outflags isn't used in this source file and compilation failed with
external GCC on sparc64.  I'm not sure why only that case failed (perhaps
inconsistent -Werror config) but it is a legitimate issue to fix.

Reviewed by:	tuexen
Differential Revision:	https://reviews.freebsd.org/D23068
2020-01-07 17:57:08 +00:00
Li-Wen Hsu
061838233a Revert r355861 because the issue has been fixed in r356443
PR:		242689
Notified by:	markj
Sponsored by:	The FreeBSD Foundation
2020-01-07 17:49:49 +00:00
John Baldwin
f09369be02 Various cleanups to cryptocheck.
- Rename 'blkcipher' to 'cipher'.  Some of the ciphers being tested
  are stream ciphers.
- Rename 'authenc' to 'eta' as it is only testing ETA chained
  operations and not other combination modes.
- Add a notion of an OCF session and some helper routines to try to
  reduce duplicated code.  This also uses a single session for both
  encrypt and decrypt operations during a single test.
- Add tests to ensure that AEAD algorithms fail decryption with
  EBADMSG when given a corrupted tag.
- Remove the transitional hack for COP_F_CIPHER_FIRST.
- Update block comment to mention plain hashes.

Reviewed by:	cem
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D22940
2020-01-07 17:07:58 +00:00