This is a redo of r267424, which was reverted in r267432 because it broke
"make buildworld" from FreeBSD 9.x. This issue has been resolved and this
change is still "make tinderbox" clean.
completely silenced. Make sure these warnings appear again, so there is
some incentive to fix them, but do not error out the whole kernel build
for them.
Noticed by: steven@pyro.eu.org
PR: 191867
MFC after: 3 days
To use tmux in an rc.d script, use the new-session flag "-d".
To use screen in an rc.d script, use the "-dm" flag.
If you really need to launch an attached session, manually
export TERM=xterm (FreeBSD 9.0 or higher) or export TERM=cons25
for older releases.
Reported by: bdrewery
Discussed on: src-committers, svn-src-all, svn-src-head
PR: bin/191869
systems without either a CSM or real graphics drivers, such as my Lenovo
Haswell laptop.
This provides working X with the small complication of a console cursor
permanently overlaid on the upper-left corner of the screen that will be
dealt with later.
Also remove some redundant screen clearing.
rather than only drivers attached later on. This involves a small amount of
code duplication with dev/fb/fbd.c, which will fixed later on.
Also improve performance of vt_blank() by making it not read from the
framebuffer unnecessarily.
This allows to clone VMs and move them between LUNs inside one storage
host without generating extra network traffic to the initiator and back,
and without being limited by network bandwidth.
LUNs participating in copy operation should have UNIQUE NAA or EUI IDs set.
For LUNs without these IDs VMWare will use traditional copy operations.
Beware: the above LUN IDs explicitly set to values non-unique from the VM
cluster point of view may cause data corruption if wrong LUN is addressed!
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
forcing filesystem VOP_LINK() methods to repeat the code. In
tmpfs_link(), remove redundand check for the type of the source,
already done by VFS.
Note that NFS server already performs this check before calling
VOP_LINK().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
it fully passes the GNU timeout regression tests, it is written in a mostly
portable way (only signal parsing is relying on non portable structures)
Phabric: D377
USB 2.0 port mask in addition to the USB 3.0 port mask. The hardware
does not always accept when writing -1U to the port switching
registers.
MFC after: 3 days
Tested by: Huang Wen Hui <huanghwh@gmail.com>
not done after the call to m_defrag(). This fixes a problem
where m_pullup() would prepend an mbuf to the list created
by m_defrag() making the chain greater than 32 again.
Tested by: rcarter@pinyon.org
Reviewed by: yongari, jfv
MFC after: 2 weeks
Improve extreme rewind import.
When doing an "extreme rewind" import ("zpool import -XF"), we attempt
to verify all data in the pool, essentially scrubbing the entire pool.
The problem is that spa_load_verify_cb() issues an unbounded number of
concurrent scrub i/os. This can lead to all of memory being used for
these zio's, wedging the system. Like normal scrub, we need to put a
cap on the number of outstanding i/os, and have the traverse thread
block when we reach this cap.
For this purpose the cap can be very large (10,000) to optimize the
elevator algorithm. Three kernel tunables have been added:
vfs.zfs.spa_load_verify_maxinflight
vfs.zfs.spa_load_verify_metadata
vfs.zfs.spa_load_verify_data
The latter two tunables controls whether metadata and/or user data
when doing extreme rewind.
Make 'zpool import -T' imply scrub.
Make zpool import -T <txg> accept hexadecimal values for the txg when
prefixed with 0x.
Skip txg's for which there is no uberblock when doing extreme rewind.
Skip reading all user data twice by skipping prefetches when doing
extreme rewinds as we do not access via the ARC.
Illumos issues:
4970 need controls on i/o issued by zpool import -XF
4971 zpool import -T should accept hex values
4972 zpool import -T implies extreme rewind, and thus a scrub
4973 spa_load_retry retries the same txg
4974 spa_load_verify() reads all data twice
MFC after: 2 weeks
While here also reword 'show buffer' to have an 'addr' argument and to
match other struct documentation.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
4971 zpool import -T should accept hex values
4972 zpool import -T implies extreme rewind, and thus a scrub
4973 spa_load_retry retries the same txg
4974 spa_load_verify() reads all data twice
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
illumos/illumos-gate@e42d205944
- Move the code to calculate resident count into separate function.
It reduces the indent level and makes the operation of
vmmap_skip_res_cnt tunable more clear.
- Optimize the calculation of the resident page count for map entry.
Skip directly to the next lowest available index and page among the
whole shadow chain.
- Restore the use of pmap_incore(9), only to verify that current
mapping is indeed superpage.
- Note the issue with the invalid pages.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
instruction emulation [1].
Fix bug in emulation of opcode 0x8A where the destination is a legacy high
byte register and the guest vcpu is in 32-bit mode. Prior to this change
instead of modifying %ah, %bh, %ch or %dh the emulation would end up
modifying %spl, %bpl, %sil or %dil instead.
Add support for moffsets by treating it as a 2, 4 or 8 byte immediate value
during instruction decoding.
Fix bug in verify_gla() where the linear address computed after decoding
the instruction was not being truncated to the effective address size [2].
Tested by: Leon Dang [1]
Reported by: Peter Grehan [2]
Sponsored by: Nahanni Systems
Previously, the "no execute" bit was being set directly in the PTE, instead
of the local variable in which the new PTE value is being constructed. So,
when the local variable was finally assigned to the PTE, the "no execute"
bit setting was lost.
Use this for VHD and VMDK to avoid allocating space in the image
for empty sectors.
Note that this negatively affects performance because mkimg uses a
temporary file for the intermediate storage. When mkimg has better
internal book keeping, performance can be significantly improved.
arc4random.c
- CVS rev. 1.22
Change arc4random_uniform() to calculate ``2**32 % upper_bound'' as
``-upper_bound % upper_bound''. Simplifies the code and makes it the
same on both ILP32 and LP64 architectures, and also slightly faster on
LP64 architectures by using a 32-bit remainder instead of a 64-bit
remainder.
- CVS rev. 1.23
Spacing
readpassphrase.c
-CVS rev. v 1.24
most obvious unsigned char casts for ctype
Obtained from: OpenBSD
MFC after: 5 days
would behave differently when utilizing rc-script was invoked manually vs.
service(8). The issue being that these utilities require the TERM environ
variable to be set and service(8) was not passing it down.
Reported by: Michael Dexter <editor@callfortesting.org>
PR: bin/191869
Reviewed by: allanjude
MFC after: 3 days
X-MFC-to: stable/10, stable/9
firmware allows up to 48B to be read this way but the driver limits
itself to 8B at a time to remain compatible with old cxgbetool
binaries.
MFC after: 1 week
