Linux has had an "nconnect" NFS mount option for some time.
It specifies that N (up to 16) TCP connections are to created for a mount,
instead of just one TCP connection.
A discussion on freebsd-net@ indicated that this could improve
client<-->server network bandwidth, if either the client or server
have one of the following:
- multiple network ports aggregated to-gether with lagg/lacp.
- a fast NIC that is using multiple queues
It does result in using more IP port#s and might increase server
peak load for a client.
One difference from the Linux implementation is that this implementation
uses the first TCP connection for all RPCs composed of small messages
and uses the additional TCP connections for RPCs that normally have
large messages (Read/Readdir/Write). The Linux implementation spreads
all RPCs across all TCP connections in a round robin fashion, whereas
this implementation spreads Read/Readdir/Write across the additional
TCP connections in a round robin fashion.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30970
Remove the qemu sparc64 example. It was only ever compile tested since
qemu had issues booting FreeBSD/sparc64. Also remove obsolete info about
armv5 configs removed long ago.
Sponsored by: Netflix
devmatch rc script would announce it was loading a module multiple
times. It used kldload -n so it really wasn't loading it that many
times, but the message is confusing. Use kldstat to see if we need to
load the module before saying we do. This fixes the vast majority of the
problems. It may be possible to race devmatch with a user invocation and
devd, though quite hard. In that case we'll announce things twice, but
still only load it once. No attempt is made to fix this.
PR: 232782
MFC After: 2 weeks
Sponsored by: Netflix
We document that we did not need .ko on the module names in
devmatch_blocklist, but we really needed them. Keep the documentation
the same, but strip the .ko when we need to use the names so you can
specify either.
PR: 256240
MFC After: 2 weeks
Sponsored by: Netflix
Rather than extending syr827 for syr828 (as initially done in D31103)
switch to the Fairchild Semiconductor Corporation fan53555 implementation
which is in-tree but was not attached to the build. The fan53555
implementation also supports syr827/syr8278 already. [1]
Update NOTES and the arm64 GENERIC configuration for the switch.
syr827 for now stays in the tree but is not used by any
kernel configuration.
Suggested by: mmel [1]
Reviewed by: mmel, manu
Differential Revision: https://reviews.freebsd.org/D31112
Only print this warning when boot verbose is enabled.
This can get pretty annoying (and useless) in some systems.
Reviewed by: kp
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Support loading a default pf ruleset in case of invalid pf.conf.
If no pf rules are loaded pf will pass/allow all traffic, assuming the
kernel is compiled without PF_DEFAULT_TO_DROP, as is the case in
GENERIC.
In other words: if there's a typo in the main pf_rules we would allow
all traffic. The new default rules minimise the impact of this.
If $pf_program (i.e. pfctl) fails to set $pf_fules and
$pf_fallback_rules_enable is YES we will load $pf_fallback_rules_file if
set, or $pf_fallback_rules.
$pf_fallback_rules can include multiple rules, for example to permit
traffic on a management interface.
$pf_fallback_rules_enable defaults to "NO", preserving historic behaviour.
man page changes by ceri@.
PR: 256410
Reviewed by: donner, kp
Sponsored by: semaphor.dk
Differential Revision: https://reviews.freebsd.org/D30791
The character between the E's was the letter O, however in the Arm
Documentation and XML the character is the number 0 (zero).
Sponsored by: The FreeBSD Foundation
This fixes the incorrect use of a sysctl add to u64. It
was for a useconds time, but on 32 bit platforms its
not a u64. Instead use the long directive.
Reviewed by: tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D31107
Happily this wasn't a real bug, because pf_killstates() never fails, but
we should check the return value anyway, in case it does ever start
returning errors.
Reported by: clang --analyze
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
pidx is never NULL, and is used unconditionally later on in the
function.
Add an assertion, as documentation for the requirement to provide an idx
pointer.
Reported by: clang --analyze
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Indicate that this is a kernel-only structure, and make it easier to
distinguish from others used to communicate with userspace.
Reviewed by: mjg
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31096
The first release of an interrupt in a situation where the interrupt table
is full should schedule a full table check the next time an interrupt is
allocated. A full check is necessary to ensure maximum separation between
the order of allocation and the order of release.
Submitted by: ehem_freebsd@m5p.com (initial version)
Discussed in: https://reviews.freebsd.org/D29310
MFC after: 4 weeks
Import the latest bsd-features branch of the one-true-awk upstream:
o Move to bison for $YACC
o Set close-on-exec flag for file and pipe redirects that aren't std*
o lots of little fixes to modernize ocde base
o free sval member before setting it
o fix a bug where a{0,3} could match aaaa
o pull in systime and strftime from NetBSD awk
o pull in fixes from {Net,Free,Open}BSD (normalized our code with them)
o add BSD extensions and, or, xor, compl, lsheift, rshift (mostly a nop)
Also revert a few of the trivial FreeBSD changes that were done slightly
differently in the upstreaming process. Also, our PR database may have
been mined by upstream for these fixes, and Mikolaj Golub may deserve
credit for some of the fixes in this update.
Suggested by: Mikolaj Golub <to.my.trociny@gmail.com>
PR: 143363,143365,143368,143369,143373,143375,214782
Sponsored by: Netflix
Import the latest bsd-features branch of the one-true-awk upstream:
o Move to bison for $YACC
o Set close-on-exec flag for file and pipe redirects that aren't std*
o lots of little fixes to modernize ocde base
o free sval member before setting it
o fix a bug where a{0,3} could match aaaa
o pull in systime and strftime from NetBSD awk
o pull in fixes from {Net,Free,Open}BSD
o add BSD extensions and, or, xor, compl, lsheift, rshift
Sponsored by: Netflix
devmatch loads a number of things automatically. Allow the list of
things to load to happen first in case those drivers affect what would
be loaded. Normally, this will produce the same results, but there's
some special cases that may not when drivers are loaded that report
other drivers missing, like virtio_pci.
PR: 253287
Reviewed by: imp
MFC After: 2 weeks
In 0a0f748641 sconfig.8.gz and apmd.8.gz
were moved back to the parent directory share/man/man8.
This conflicts with a previous entry in OLD_FILES so running 'make
delete-old' would delete the new installed files.
Reported by: marklmi@yahoo.com
Approved by: emaste@
Fixes: 0a0f748641 - Build manpages for all architectures
MFH: 4 weeks
Differential Revision: https://reviews.freebsd.org/D31092
These were all incorrectly labeled as 2-clause BSD licenses by a
semi-automated process, when in fact they are 3-clause.
Discussed with: pfg, imp
MFC after: 2 weeks
Sponsored by: Axcient
A user reported that when compiling without KERN_TLS, and
with -O0, the kernel failed to link due to ktls_disable_ifnet()
being undefined. Making the shim static works around this issue.
Reported by: Gary Jennejohn
Sponsored by: Netflix
When the initial fcmpset in pmap_promote_l2() fails, there is no need
to repeat the check for the physical address being 2MB aligned or for
the accessed bit being set. While the pmap is locked the hardware can
only transition the accessed bit from 0 to 1, and we have already
determined that it is 1 when the fcmpset fails.
MFC after: 1 week
From the zpool_influxdb.8 manual page:
zpool_influxdb produces InfluxDB-line-protocol-compatible metrics from
zpools. Like the zpool command, zpool_influxdb reads the current pool
status and statistics. Unlike the zpool command which is intended for
humans, zpool_influxdb formats the output in the InfluxDB line protocol.
The expected use is as a plugin to a metrics collector or aggregator,
such as Telegraf.
zpool_influxdb is installed into /usr/libexec/zfs/
Differential revision: https://reviews.freebsd.org/D31094
MFC after: 3 days
When fixing another bug, I noticed that the alternate
TCP stacks do not build when various combinations of
ipv4 and ipv6 are disabled.
Reviewed by: rrs, tuexen
Differential Revision: https://reviews.freebsd.org/D31094
Sponsored by: Netflix
HPTS drives both rack and bbr, and yet there have been many complaints
about performance. This bit of work restructures hpts to help reduce CPU
overhead. It does this by now instead of relying on the timer/callout to
drive it instead use user return from a system call as well as lro flushes
to drive hpts. The timer becomes a backstop that dynamically adjusts
based on how "late" we are.
Reviewed by: tuexen, glebius
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D31083
These ABIs do not use umtx at all, so there is nothing to clean.
Cloudabi references to umtx keys do not require any cleanups anyway.
Requested by: dchagin
Reviewed by: dchagin, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30987
Use sysentvec hooks to only call umtx_thread_exit/umtx_exec, which handle
robust mutexes, for native FreeBSD ABI. Similarly, there is no sense
in calling sigfastblock_clear() for non-native ABIs.
Requested by: dchagin
Reviewed by: dchagin, markj (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30987
after itimers are stopped. This makes it more usable for e.g. native FreeBSD
ABI sysentvecs.
Reviewed by: dchagin, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30987
Unlike sv_onexec(), it is called from the old (pre-exec) sysentvec structure.
The old vmspace for the process is still intact during the call.
Reviewed by: dchagin, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30987
The intent is to eliminate the MT_NOINIT flag and consequently a branch
from the constructor.
Reviewed by: gallatin
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31080
It makes no sense to set it below PAGE_SIZE, since it increases all
overheads and makes returning memory to OS problematic. It makes no
sense to set it above PAGE_SIZE, since such allocations and especially
frees are too expensive and cause KVA fragmentation to benefit from
fewer chunks. After that it makes no sense to keep more complicated
math here.
What may have sense though is just a tunable border between linear and
scatter ABDs, previously also controlled by this tunable. Retain that
functionality by taking abd_scatter_min_size tunable from Linux, just
with different default value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#12328
This dramatically reduces the lock contention on systems with slower
(non-TSC) timecounters. With TSC the difference is minimal, but since
this lock is pretty congested, any improvement counts. Plus I don't
see any reason to do it under the lock other than the latency of the
lock itself, which this change actually reduces.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12281
Add the missing macros and decode all the fields as described in the
Arm Architecture System Registers XML corresponding to Armv8.5.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30983
This makes the ada(4) driver use UMA for its CCBs. While it's
da(4) counterpart needs some more testing, this one seems to be
safe now.
Please let me know via email if you notice any suspicious kernel
messages,
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30567
During the removal of cam_sim_alloc_dev() in
aeb04e88f5 for sdhci.c and the
follow-up build-fix in a72af82e31
slot->dev and slot->bus got mixed up for MMCCAM; slot->dev is
only used in the !MMCCAM case so is uninitialised here leading to
a panic; switch back to slot->bus to return to the status quo.
Reviewed by: imp (ack on arm@)
X-Differential Revision: https://reviews.freebsd.org/D30857
This is a potentially arguable change, because it removes some
compatibility cruft that certain systems or people may have come to rely
on (either a very long time ago, or unwisely in recent times).
On the other hand, it's been literally over a decade since OpenZFS
switched to the strategy of using opaque numbered /dev/zd* device nodes,
with the canonical zvol access path being a directory tree of symlinks
created by udev rules inside /dev/zvol/*. (See #102.) Even at the time,
the /dev/* scheme was labeled as being for "compatibility".
This commit removes the second tree of symlinks located directly at
/dev/*, under the assumption that anybody with any sense has been using
the intended /dev/zvol/* path for a very very long time now.
(The more I think about this, the more I anticipate that some large
fraction of people will have been blissfully unaware that the intention
has been for them to use the /dev/zvol/* tree all along, and they will
have come to rely upon the /dev/* tree simply because it's been there
this whole time despite being a compat thing.)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Justin Gottula <justin@jgottula.com>
Closes#12303
There are several cases where we make a goodput measurement and we are running
out of data when we decide to make the measurement. In reality we should not make
such a measurement if there is no chance we can have "enough" data. There is also
some corner case TLP's that end up not registering as a TLP like they should, we
fix this by pushing the doing_tlp setup to the actual timeout that knows it did
a TLP. This makes it so we always have the appropriate flag on the sendmap
indicating a TLP being done as well as count correctly so we make no more
that two TLP's.
In addressing the goodput lets also add a "quality" metric that can be viewed via
blackbox logs so that a casual observer does not have to figure out how good
of a measurement it is. This is needed due to the fact that we may still make
a measurement that is of a poorer quality as we run out of data but still have
a minimal amount of data to make a measurement.
Reviewed by: tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D31076
Onlining a vdev can fail. Log the error if it does.
Reviewed by: mav, asomers
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D30882
