not by some hint setting. Do more preparations for FC-Tape.
Clean up resource counting for 24XX or later chipsets so
we find out after EXEC_FIRMWARE what is actually supported.
Set target mode exchange count based upon whether or not
we are supporting simultaneous target/initiator mode. Clean
up some old (pre-24XX) xfwoption and zfwoption issues.
Sponsored by: Spectralogic
MFC after: 3 days
the assumption that ath_softc doesn't change size based on build time
configuration.
I picked up on this because suddenly radar stuff didn't work; and
although the ath_dfs code was setting sc_dodfs=1, the main ath driver
saw sc_dodfs=0.
So for now, include opt_ath.h in driver source files. This seems like
the sane thing to do anyway.
I'll have to do a pass over the code at some later stage and turn
the radiotap TX/RX structs into malloc'ed memory, rather than in-line
inside of ath_softc. I'd rather like to keep ath_softc the same
layout regardless of configuration parameters.
Pointy hat to: adrian
When building libelf in the bootstrap stage this would include the tree
versions of, for example, sys/_types.h. This would work as long as the
tree's version of this file was close enough to the system's version of
the file. If, however, there was a change in the tree such that the location
of a typedef was moved this would cause problems. In this case the version
of sys/_types.h in the tree no longer defines __wchar_t and expects it to
to be defined in machine/_types.h, however we pick up machine/_types.h from
the system and find it is not defined there. The solution is to restrict the
parts of sys er include from the tree to those that are needed.
This fixes the recent Tinderbox failure.
Pointy Hat to: andrew
a buffer pointer.
For large radar pulses, the AR9130 and later will return a series of
FFT results for software processing. These can overflow a single 2KB
buffer on longer pulses. This would result in undefined buffer behaviour.
This includes a few new fields in each RXed frame:
* per chain RX RSSI (ctl and ext);
* current RX chainmask;
* EVM information;
* PHY error code;
* basic RX status bits (CRC error, PHY error, etc).
This is primarily to allow me to do some userland PHY error processing
for radar and spectral scan data. However since EVM and per-chain RSSI
is provided, others may find it useful for a variety of tasks.
The default is to not compile in the radiotap vendor extensions, primarily
because tcpdump doesn't seem to handle the particular vendor extension
layout I'm using, and I'd rather not break existing code out there that
may be (badly) parsing the radiotap data.
Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel
configuration file to enable these options.
and the CRC error bits set. The radar payload is correct.
When this happens, the stack doesn't see them PHY error frames and
isn't interpreted as a PHY error. So, no radar detection and no radiotap
PHY error handling.
Now, this may introduce some weird issues if the MAC sends up some other
combination of CRC error + PHY error frames; this commit would break that
and mark them as PHY errors instead of CRC errors.
I may tinker with this a little more to pass radar/early radar/spectral
frames up as PHY errors if the CRC bit is set, to restore the previous
behaviour (where if CRC is set on a PHY error frame, it's marked as a CRC
error rather than PHY error.)
Tested on: AR5416, over the air, to a USRP N200 which is generating a
large number of a variety of radar pulses.
TODO: Test on AR9130, AR9160, AR9280 (and maybe radar pulses on
2GHz on AR9285/AR9287.)
PR: kern/169362
a da(4) instance going away while GEOM is still probing it.
In this case, the GEOM disk class instance has been created by
disk_create(), and the taste of the disk is queued in the GEOM
event queue.
While that event is queued, the da(4) instance goes away. When the
open call comes into the da(4) driver, it dereferences the freed
(but non-NULL) peripheral pointer provided by GEOM, which results
in a panic.
The solution is to add a callback to the GEOM disk code that is
called when all of its resources are cleaned up. This is
implemented inside GEOM by adding an optional callback that is
called when all consumers have detached from a provider, and the
provider is about to be deleted.
scsi_cd.c,
scsi_da.c: In the register routine for the cd(4) and da(4)
routines, acquire a reference to the CAM peripheral
instance just before we call disk_create().
Use the new GEOM disk d_gone() callback to register
a callback (dadiskgonecb()/cddiskgonecb()) that
decrements the peripheral reference count once GEOM
has finished cleaning up its resources.
In the cd(4) driver, clean up open and close
behavior slightly. GEOM makes sure we only get one
open() and one close call, so there is no need to
set an open flag and decrement the reference count
if we are not the first open.
In the cd(4) driver, use cam_periph_release_locked()
in a couple of error scenarios to avoid extra mutex
calls.
geom.h: Add a new, optional, providergone callback that
is called when a provider is about to be deleted.
geom_disk.h: Add a new d_gone() callback to the GEOM disk
interface.
Bump the DISK_VERSION to version 2. This probably
should have been done after a couple of previous
changes, especially the addition of the d_getattr()
callback.
geom_disk.c: Add a providergone callback for the disk class,
g_disk_providergone(), that calls the user's
d_gone() callback if it exists.
Bump the DISK_VERSION to 2.
geom_subr.c: In g_destroy_provider(), call the providergone
callback if it has been provided.
In g_new_geomf(), propagate the class's
providergone callback to the new geom instance.
blkfront.c: Callers of disk_create() are supposed to pass in
DISK_VERSION, not an explicit disk API version
number. Update the blkfront driver to do that.
disk.9: Update the disk(9) man page to include information
on the new d_gone() callback, as well as the
previously added d_getattr() callback, d_descr
field, and HBA PCI ID fields.
MFC after: 5 days
This is required for ARM EABI. Section 7.1.1 of the Procedure Call for the
ARM Architecture (AAPCS) defines wchar_t as either an unsigned int or an
unsigned short with the former preferred.
Because of this requirement we need to move the definition of __wchar_t to
a machine dependent header. It also cleans up the macros defining the limits
of wchar_t by defining __WCHAR_MIN and __WCHAR_MAX in the same machine
dependent header then using them to define WCHAR_MIN and WCHAR_MAX
respectively.
Discussed with: bde
to add PV list locking to pmap_pv_demote_pde(), it is necessary to change
the way that pmap_pv_demote_pde() allocates PV entries. Specifically,
once pmap_pv_demote_pde() begins modifying the PV lists, it can't allocate
any new PV chunks, because that could require the PV list lock to be
dropped. So, all necessary PV chunks must be allocated in advance. To my
surprise, this new approach is a few percent faster than the old one.
the scheduled task from tc_windup(). Do it directly from tc_windup in
interrupt context [1].
Establish the permanent mapping of the shared page into the kernel
address space, avoiding the potential need to sleep waiting for
allocation of sf buffer during vdso_timehands update. As a
consequence, shared_page_write_start() and shared_page_write_end()
functions are not needed anymore.
Guess and memorize the pointers to native host and compat32 sysentvec
during initialization, to avoid the need to get shared_page_alloc_sx
lock during the update.
In tc_fill_vdso_timehands(), do not loop waiting for timehands
generation to stabilize, since vdso_timehands is written in the same
interrupt context which wrote timehands.
Requested by: mav [1]
MFC after: 29 days
and CAM_LUN_INVALID for case of missing devices. In removes tons of error
messages from CAM during bus scans.
Reported and tested by: Mike Tancsa <mike@sentex.net>
MFC after: 3 days
defect information it has before grabbing the full defect list.
This works around a bug with some Hitachi drives that generate data overrun
errors when they are asked for more defect data than they have.
The change is done in a spec-compliant way, so it should have no negative
impact on drives that don't have this issue.
This is based on work originally done at Sandvine.
scsi_da.h: Add a define for the maximum amount of data that can be
contained in a defect list.
camcontrol.c: Update the readdefects() function to issue an initial
command to determine the length of the defect list, and
then use that length in the request for the full defect
list.
camcontrol.8: Add a note that some drives will report 0 defects available
if you don't request either the PLIST or GLIST.
Submitted by: Mark Johnston <markjdb@gmail.com> (original version)
MFC after: 3 days
by vm_objects.
- Add flags for the per-object lock and free pages queue mutex lock.
Use the newly added flags to mark the cache root within the vm_object
structure.
Please note that other vm_object members should be marked with correct
locking but they are left for other commits.
In collabouration with: alc
MFC after: 3 days3 days3 days
Our libedit has been diverging from the mainstream version
maintained in NetBSD. As a consequence it has been difficult
to do an appropriate MFV and we have been bringing only
partial updates.
Here we update most of the files to at least match the
version available in NetBSD's snapshot of 20091228. This
version was chosen because it still doesn't include wide
character support (UTF-8), which involves many changes and
new files.
From NetBSD's logs:
Dec 15 22:13:33 2006 - editline.3 el.c el.h histedit.h
add EL_GETFP, and EL_SETFP.
Apr 5 15:53:28 2008 - editline.3 el.c histedit.h readline.c
add EL_REFRESH for the benefit of readline
Sep 10 15:45:37 2008 - common.c el.c read.c refresh.c sig.c term.c term.h tty.c
Allow a single process to control multiple ttys (for pthreads using _REENTRANT)
using multiple EditLine objects.
Jan 18 12:17:24 2009 - el.c read.c readline.c
fix -Wsign-compare issues
Feb 6 14:40:32 2009 - history.c
Plug memory leak, from MySQL.
Feb 5 19:15:44 2009 - histedit.h read.c
match documentation in el_push
Feb 6 13:14:37 2009 - vi.c
Portability fix.
Feb 12 13:39:49 2009 - readline.c term.c
More fixes for existing portability stuff.
Feb 15 21:24:13 2009 - el.h read.c
don't restart on EINTR, instead return NULL immediately. From Anon Ymous
Feb 15 21:25:01 2009 - sig.c sig.h
in order for read() to return EINTR we need to use sigaction, not signal,
otherwise SA_RESTART is set.
Feb 15 21:55:23 2009 - chared.c chared.h common.c emacs.c filecomplete.c
filecomplete.h key.c key.h read.c readline.c refresh.c search.c
term.c tokenizer.c tty.c vi.c
pass lint on _LP64.
Feb 17 21:34:26 2009 - el.c histedit.h prompt.c prompt.h
allow for a prompt argument.
Feb 18 15:04:40 2009 - sig.c
SA_RESTART for all signals but SIGINT. From Anon Ymous.
Feb 19 15:20:22 2009 - read.c sig.c sig.h
reset and redraw on sigcont. From Anon Ymous.
Feb 21 23:31:56 2009 - key.c key.h readline.c vi.c
more size_t stuff.
Mar 10 20:46:15 2009 - editline.3 read.c
make el_gets set the count to -1 on error to distinguish between EOF and
error.
Mar 31 17:38:27 2009 - editline.3 el.c histedit.h prompt.c prompt.h
refresh.c term.c term.h
Implement literal prompt sequences. Now someone can implement
RL_PROMPT_START_LITERAL/RL_PROMPT_END_LITERAL :-)
Mar 31 21:33:17 2009 - term.c
cast to size_t to avoid sign / unsigned comparison warning.
Apr 23 02:03 2009 - term.c
Apply patch (requested by msaitoh in ticket #2007):
Coverity CID 1668: Plug memory leak when malloc() failed.:55 2009
May 11 18:33:30 2009 - editline.3 el.c histedit.h
restore binary compatibility by providing new prompt functions that take
an extra literal character.
May 19 21:45:14 2009 - refresh.c
always scroll when we advance past bottom. From Caleb Welton
cwelton at greenplum dot com.
Jul 17 12:27:57 2009 - term.c
- off by one in the term.h case.
- make code more similar to tcsh (if we want to handle wide chars, this is
needed; for now it is a no-op)
Jul 22 15:56:29 2009 - el.c
Move filename to the scope it is being used.
From Michael Cook mcook at bbn dot com
Jul 22 15:57:00 2009 - read.c
Always initialize nread since it is an out param.
From Michael Cook mcook at bbn dot com
Jul 22 18:25:26 2009 - el.c
Only need path if we have issetugid... From Anon Ymous
Jul 25 21:19:23 2009 - el.c
Ignore comment lines in .editrc from Jess Thrysoee
Sep 7 21:24:33 2009
histedit.h history.c readline.c
apply apple patches from:
http://opensource.apple.com/source/libedit/libedit-11/patches/
Dec 28 21:52:43 2009 - refresh.c
Fix bug where tab completion on the second or > line that caused listing
ended up corrupting the display by an extra space in the beginning. Reported
by Mac Chan.
Dec 28 22:15:36 2009 - refresh.c term.c
reduce diff with tcsh
Obtained from: NetBSD
Tested by: bapt, jilles and current@
MFC after: 1 week
trampoline addresses after the shared page is enabled. Handle FreeBSD
ABIs without shared page support too.
Reported and tested by: David Wolfskill <david catwhisker org>
(previous version)
Pointy hat to: kib
MFC after: 1 month
clock_gettime(2) functions if supported. The speedup seen in
microbenchmarks is in range 4x-7x depending on the hardware.
Only amd64 and i386 architectures are supported. Libc uses rdtsc and
kernel data to calculate current time, if enabled by kernel.
Hopefully, this code is going to migrate into vdso in some future.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
usermode, using shared page. The structures and functions have vdso
prefix, to indicate the intended location of the code in some future.
The versioned per-algorithm data is exported in the format of struct
vdso_timehands, which mostly repeats the content of in-kernel struct
timehands. Usermode reading of the structure can be lockless.
Compatibility export for 32bit processes on 64bit host is also
provided. Kernel also provides usermode with indication about
currently used timecounter, so that libc can fall back to syscall if
configured timecounter is unknown to usermode code.
The shared data updates are initiated both from the tc_windup(), where
a fast task is queued to do the update, and from sysctl handlers which
change timecounter. A manual override switch
kern.timecounter.fast_gettime allows to turn off the mechanism.
Only x86 architectures export the real algorithm data, and there, only
for tsc timecounter. HPET counters page could be exported as well, but
I prefer to not further glue the kernel and libc ABI there until
proper vdso-based solution is developed.
Minimal stubs neccessary for non-x86 architectures to still compile
are provided.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
Do not rely on the busy state of the page from which we allocate the
chunk, to protect allocator state. Use statically allocated sx lock
instead.
Provide more flexible KPI. In particular, allow to allocate chunk
without providing initial data, and allow writes into existing
allocation. Allow to get an sf buf which temporary maps the chunk, to
allow sequential updates to shared page content without unmapping in
between.
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
