1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-18 10:35:55 +00:00
Commit Graph

41506 Commits

Author SHA1 Message Date
Nick Hibma
2592a72537 The Makefiles for the modules for the USB device drivers.
Finally.
1999-10-07 21:23:08 +00:00
Nick Hibma
33ccf7c7a9 Make the umodem stub compile 1999-10-07 21:09:08 +00:00
Nick Hibma
53ec492bb8 Remove a debugging printf. 1999-10-07 21:08:29 +00:00
Nick Hibma
92fc9a510e Add make_dev and remove_dev. 1999-10-07 21:06:52 +00:00
Nick Hibma
354b93e124 priorities weren't correct (old version). 1999-10-07 20:58:43 +00:00
Mark Murray
8a94827843 Allow for a telnet in secure/ (SRA telnet).
Submitted by:	Nick Sayer
1999-10-07 20:06:22 +00:00
Mark Murray
b8351749c9 Allow for a telnet in secure/ (SRA telnet). 1999-10-07 20:04:17 +00:00
Mark Murray
f05d1ad2e3 Allow for another telnet in secure (SRA telnet).
Submitted by:	Nick Sayer
1999-10-07 20:02:45 +00:00
Mark Murray
d14fc57cb7 Make telnet with SRA work.
Submitted by:	Nick Sayer
1999-10-07 19:47:09 +00:00
Nick Hibma
f3e63a2977 Deconfuse release and revision 1999-10-07 19:41:00 +00:00
Nick Hibma
8c895d718b Major synchronisation with the NetBSD USB stack:
- Some cleanup and improvements in the uhci and ohci drivers
- Support for plugging and unplugging devices improved
- Now available is bulk transport over OHCI controllers
- Resume and suspend have been temporarily been disabled again.  Proper
  support for it is available in the uhci.c and ohci.c files but I have
  not yet spent the brain cycles to use it.
- OpenBSD now uses the USB stack as well
- Add FreeBSD tags
1999-10-07 19:26:38 +00:00
Mark Murray
eaaceb5416 Bring in SRA for telnet.
Submitted by:	Nick Sayer
1999-10-07 18:59:55 +00:00
Nick Hibma
82799545e3 remove the use of uhci_reset to wake up the controller after
resume/suspend (->resume is broken again, will be fixed properly ASAP)

style fixes
1999-10-07 18:56:10 +00:00
Nick Hibma
271ef6615e Remove last bits and pieces of NetBSD porting.
Remove the use of ukbd_disconnect and replace it with direct
calls to disable.
Change printf to DPRINTF
Remove the use of usbd_lock, change it to splusb()/splx()
1999-10-07 18:53:08 +00:00
Nick Hibma
dc73fb2b83 Remove the last bits and pieces left over from porting the driver
from NetBSD.
1999-10-07 18:50:46 +00:00
Jun Kuriyama
381d8f3644 Add COREGA EtherII PCC-T entry.
Submitted by:	KANAZAWA makoto <mako@tcn-catv.ne.jp>
PR:		conf/12650
1999-10-07 15:50:44 +00:00
Sheldon Hearn
49e11e3a66 Mdoc cleanup, with a few grammar cleanups on the side.
Reviewed by:	mpp
1999-10-07 13:56:43 +00:00
Marcel Moolenaar
210430fd8d Simplification of the signal trampoline and other cleanups.
o  Remove unused defines from genassym.c that were needed
   by the trampoline.
o  Add load_gs_param function to support.s that catches
   a fault when %gs is loaded with an invalid descriptor.
   The function returns EFAULT in that case.
o  Remove struct trapframe from mcontext_t and replace it
   with the list of registers.
o  Modify sendsig and sigreturn accordingly.

This commit contains a patch by bde.

Reviewed by: luoqi, jdp
1999-10-07 12:40:34 +00:00
Boris Popov
f05e3aac6f Put back cn_namelen initialization. Removed by phk in rev 1.2. 1999-10-07 12:18:12 +00:00
Marcel Moolenaar
a349d1bbfb I forgot this one :-(
ucontext_t is now actually compatible with struct sigcontext.

Discovered by: jdp
1999-10-07 09:03:17 +00:00
Alfred Perlstein
09ef98c6c0 sync with netbsd PR 8534, fix undefined C code.
Pointed out by: David A. Holland
1999-10-07 08:41:55 +00:00
Brian Somers
14e34a55c3 Don't go from datalink state opening directly to lcp, go via
carrier instead so that we can set up our carrier detect
timer and eventually notice when we lose carrier.

Honour the script.run value when coming out of carrier state.

PR:	14145
1999-10-07 07:32:12 +00:00
Mike Smith
dbb1a3463c Add entries for the 'amrd' and 'mlxd' disk nodes used by the AMI MegaRAID
and Myles drivers respectively.
1999-10-07 02:37:04 +00:00
Mike Smith
6ac4727a3b Connect the 'amr' and 'mlx' drivers. They can be built as modules or
integrated into a static kernel as the user wishes.
1999-10-07 02:24:22 +00:00
Mike Smith
d5a51e03e7 This is a driver for the AMI MegaRAID family of controllers. It all of
the AMI PCI controllers using the 8LD firmware interface (40LD firmware
will be supported as soon as I have hardware to test with).

These controllers are rebadged by Dell as the PERC, as well as by HP
and possibly other vendors.
1999-10-07 02:23:12 +00:00
Mike Smith
1ac4b82b11 This is a driver for the Mylex DAC960 family of integrated RAID
controllers.  It currently supports the P, PL, PD and PU variants,
with more to be supported shortly.
1999-10-07 02:20:32 +00:00
Mike Smith
5c0b893d05 Be much more selective in claiming devices that might be IDE controllers.
The old algorithm was:

 if class == storage and subclass != SCSI device must be IDE

This results in claiming 'raid' and 'other' storage devices as IDE,
which is typically not the case.

Reviewed by:	sos
1999-10-07 02:17:21 +00:00
Mike Smith
f5ff1eca5e Re-synchronise the alpha major numbers list with the i386 list.
Add the Mylex DAC960 and AMI MegaRAID numbers.
1999-10-07 02:15:10 +00:00
Brian Somers
990a543f49 Mention the received/expected magic for dodgy ECHO LQRs. 1999-10-06 23:22:54 +00:00
John Hay
5cdfd8f709 Swap IOC_OUT and IOC_IN for the SETDIR macro. The linux ioctl read and
write bits are swapped.

Reviewed by:	luoqi, marcel
1999-10-06 19:51:37 +00:00
Alfred Perlstein
cb479b1136 Put the umount request through the same translation as the mount
request.
Fix some uninitialized warnings and a style bug while we are here.
Problem still exists where a failed umount can be misreported as
success.

Submitted by: Martin Blapp <mb@imp.ch>
1999-10-06 18:20:44 +00:00
Brian Somers
4085cc2dee 5 minutes == 300 seconds, not 600 !
Submitted by:	Robert Inder <R.Inder@ed.ac.uk>
1999-10-06 15:07:15 +00:00
Kazutaka YOKOTA
afa239de67 - Remove cdevsw_add(). 1999-10-06 13:03:09 +00:00
Kazutaka YOKOTA
5d5198c72f - Remove cdevsw_add().
- Call ttyregister() and make_dev() to register virtual terminals.
- Set nottystop to tp->t_stop.
1999-10-06 13:01:12 +00:00
Sheldon Hearn
a0468d95ed Do not misinterpret blank and comment lines as passwordless accounts.
PR:	13909
Submitted by:	Peter Jeremy <peter.jeremy@alcatel.com.au>
1999-10-06 10:29:33 +00:00
Ruslan Ermilov
04bf7dcfeb Fixed the description of how packets re-enter IP firewall filter.
Suggested by:	Ari Suutari <ari@suutari.iki.fi>
1999-10-06 09:26:39 +00:00
Sheldon Hearn
9c6fde3cd3 Remove the description of the deprecated savecore_enable option,
which is no longer used.  Expand the description of the dumpdev
option accordingly.

PR:	14152
Reported by:	nrahlstr
1999-10-06 09:20:40 +00:00
Nick Hibma
03026827d2 Remove the inclusion of device.h. It's no longer there. 1999-10-06 07:45:30 +00:00
Poul-Henning Kamp
07d6a0622c Add $FreeBSD$.
Remove some minphys related cruft.
1999-10-06 07:26:48 +00:00
Nick Hibma
3e2c6ca3b9 Removal of sys/device.h
- Move intrhook stuff into kernel.h
- Remove all occurrences of #device <device.h>
- Add kernel.h were necessary (nowhere)
- delete device.h

This file contained the structures for cfdata (old style config) and is no
longer used. It was included by most drivers.

It confuses the remote debugger as the definition of 'struct device' in
device.h is found before the one in bus_private.h.
1999-10-05 21:19:41 +00:00
Nick Hibma
694e31f79d Attempt at cleaning up the (unused part of) support for TurboChannel to
remove the need for device.h.
1999-10-05 20:46:58 +00:00
Nick Hibma
921e109fe9 Add SLIST_HEAD_INITIALIZER for static initialisation of SLISTs. 1999-10-05 20:35:32 +00:00
Nick Hibma
d8add747ef Check whether init and term are actually given 1999-10-05 20:32:53 +00:00
Nick Hibma
d7576d81ca Add comment about the debugging flag 1999-10-05 20:30:21 +00:00
Nick Hibma
fc56bfd8a7 Print more verbose debugging output
Clean up computation of parameters.
1999-10-05 20:29:00 +00:00
Chris Piazza
0f3c23dbe2 o Fix some random spelling errors
o The capital of Quebec is Quebec or Quebec City
o Add Nunavut (capital is Iqaluit)

Reviewed by:	billf
Obtained from:	OpenBSD
1999-10-05 16:49:51 +00:00
David E. O'Brien
ca5065cd1f Fully document -q.
Restore original $Header$.
1999-10-05 15:20:45 +00:00
Marcel Moolenaar
732c957ce2 Undo previous change.
Submitted by: bde
1999-10-05 14:40:38 +00:00
Jordan K. Hubbard
0ec4416c55 Really fix the auto keyword botch correctly by just letting it
do its job and not override it when set.

Submitted by:		Ruslan Ermilov <ru@FreeBSD.org>
1999-10-05 10:10:42 +00:00
Greg Lehey
85e244dbfa Bring in line with reality. 1999-10-05 05:33:35 +00:00