for Windows are deserialized miniports. Such drivers maintain their own
queues and do their own locking. This particular driver is not deserialized
though, and we need special support to handle it correctly.
Typically, in the ndis_rxeof() handler, we pass all incoming packets
directly to (*ifp->if_input)(). This in turn may cause another thread
to run and preempt us, and the packet may actually be processed and
then released before we even exit the ndis_rxeof() routine. The
problem with this is that releasing a packet calls the ndis_return_packet()
function, which hands the packet and its buffers back to the driver.
Calling ndis_return_packet() before ndis_rxeof() returns will screw
up the driver's internal queues since, not being deserialized,
it does no locking.
To avoid this problem, if we detect a serialized driver (by checking
the attribute flags passed to NdisSetAttributesEx(), we use an alternate
ndis_rxeof() handler, ndis_rxeof_serial(), which puts the call to
(*ifp->if_input)() on the NDIS SWI work queue. This guarantees the
packet won't be processed until after ndis_rxeof_serial() returns.
Note that another approach is to always copy the packet data into
another mbuf and just let the driver retain ownership of the ndis_packet
structure (ndis_return_packet() never needs to be called in this
case). I'm not sure which method is faster.
which have configuration files. This is just a cut-paste from newsyslog.8
with the following changes:
o Kill hard sentence breaks.
o Markup fixes.
o Wordsmithing.
based on the Madison core and targeting the low end of the spectrum.
Its clock frequency is 1Ghz, whereas Madison starts at 1.3Ghz. Since
the CPUID information is the same for Madison and Deerfield, we use
the clock frequency to identify the processor.
Supposedly the Deerfield only uses 62W, which seems to be less than
modern Xeon processors (about 70W) and about half what a Madison would
need.
the .for loop:
- Replaced four global variables in parse.c with one.
- Made Parse_FromString() accept the "lineno" as an argument.
- Fixed line numbering when there are escaped newlines in the
body of the .for loop.
Adopted from: NetBSD
On vnode backed md(4) devices over a certain, currently undetermined
size relative to the buffer cache our "lemming-syncer" can provoke
a buffer starvation which puts the md thread to sleep on wdrain.
This generally tends to grind the entire system to a stop because the
event that is supposed to wake up the thread will not happen until a fair
bit of the piled up I/O requests in the system finish, and since a lot
of those are on a md(4) vnode backed device which is currently waiting
on wdrain until a fair amount of the piled up ... you get the picture.
The cure is to issue all VOP_WRITES on the vnode backing the device
with IO_SYNC.
In addition to more closely emulating a real disk device with a
non-lying write-cache, this makes the writes exempt from rate-limited
(there to avoid starving the buffer cache) and consequently prevents
the deadlock.
Unfortunately performance takes a hit.
Add "async" option to give people who know what they are doing the
old behaviour.
only. This is a MAJOR incompatible change for the sparc64 platform,
but will not effect FreeBSD on other architectures.
Reviewed by: imp for UPDATING, freebsd-sparc for the change itself.
Nanobsd should make it very simple for people to create (CF-)disk images
for embedded us of FreeBSD.
Currently only works for 256MB disks. More agrressive shaving of the
build image can reduce that much further.
This may not be a generally valid configuration, but neither is relying
on the PCI clock to be stable.
The only currently known and supported hardware is the VPN14x1 from
Soekris, and since it has external clock, we fail safe(r) by using
it.
Unfortunately there is no way to probe this reliably.
Retire g_sanity() and corresponding debugflag (0x8)
Retire g_{stall,release}_events().
Under #ifdef DIAGNOSTIC:
Make g_valid_obj() an official function and have it return an an
non-zero integer which indicates the kind of object when found.
Implement G_VALID_{CLASS,GEOM,CONSUMER,PROVIDER}() macros based
on g_valid_obj().
Sprinkle calls to these macros liberally over the infrastructure.
Always check that we do not free a live object.
that I added recently:
- When a periodic timer fires, it's automatically re-armed. We must
make sure to re-arm the timer _before_ invoking any caller-supplied
defered procedure call: the DPC may choose to call KeCancelTimer(),
and re-arming the timer after the DPC un-does the effect of the
cancel.
- Fix similar issue with periodic timers in subr_ndis.c.
- When calling KeSetTimer() or KeSetTimerEx(), if the timer is
already pending, untimeout() it first before timeout()ing
it again.
- The old Atheros driver for the 5211 seems to use KeSetTimerEx()
incorrectly, or at the very least in a very strange way that
doesn't quite follow the Microsoft documentation. In one case,
it calls KeSetTimerEx() with a duetime of 0 and a period of 5000.
The Microsoft documentation says that negative duetime values
are relative to the current time and positive values are absolute.
But it doesn't say what's supposed to happen with positive values
that less than the current time, i.e. absolute values that are
in the past.
Lacking any further information, I have decided that timers with
positive duetimes that are in the past should fire right away (or
in our case, after only 1 tick). This also takes care of the other
strange usage in the Atheros driver, where the duetime is
specified as 500000 and the period is 50. I think someone may
have meant to use -500000 and misinterpreted the documentation.
- Also modified KeWaitForSingleObject() and KeWaitForMultipleObjects()
to make the same duetime adjustment, since they have the same rules
regarding timeout values.
- Cosmetic: change name of 'timeout' variable in KeWaitForSingleObject()
and KeWaitForMultipleObjects() to 'duetime' to avoid senseless
(though harmless) overlap with timeout() function name.
With these fixes, I can get the 5211 card to associate properly with
my adhoc net using driver AR5211.SYS version 2.4.1.6.
a static const global variable in ah_core.c. This makes it more clear
that this array does not require synchronization, as well as
synchronizing the layout to the ESP algorithm list. This is the
version of my patch that Itojun committed to the KAME tree.
Obtained from: me, via KAME
pmap. For the kernel pmap, Giant is not required. In general, for
other pmaps, Giant is required by i386's pmap_pte() implementation.
Specifically, the use of PMAP2/PADDR2 is synchronized by Giant.
Note: In principle, updates to the kernel pmap's wired count could be
lost without Giant. However, in practice, we never use the kernel
pmap's wired count. This will be resolved when pmap locking appears.
- With the above change, cpu_thread_clean() and uma_large_free() need
not acquire Giant. (The first case is simply the revival of
i386/i386/vm_machdep.c's revision 1.226 by peter.)
- Add encapmtx to protect ip_encap.c global variables (encapsulation
list).
- Unifdef #ifdef 0 pieces of encap_init() which was (and now really
is) basically a no-op.
- Lock encapmtx when walking encaptab, modifying it, comparing
entries, etc.
- Remove spl's.
Note that currently there's no facilite to make sure outstanding
use of encapsulation methods on a table entry have drained bfore
we allow a table entry to be removed. As such, it's currently the
caller's responsibility to make sure that draining takes place.
Reviewed by: mlaier
