"inside" of locked regions. That is, an acquire atomic operation will
always enforce a memory barrier after the atomic operation and a release
operation will always enforce a memory barrier before the atomic
operation.
- Explicitly use 'mb' instead of 'wmb' in release atomic operations. The
'wmb' memory barrier is not strong enough to guarantee coherence with
other processors. This is effectively a nop since alpha_wmb() actually
performs a 'mb' and not a 'wmb', but I wanted the code to be more
correct since at some point in the future alpha_wmb()'s implementation
may switch to being a real 'wmb'.
we should call ast(). This allows us to branch to a separate Lkernelret
label so we can fixup the saved t7 register in the trapframe. Otherwise
we can run into a problem on SMP systems where a process is interrupted by
a trap or interrupt on one CPU, migrates to another CPU, and then returns
with the t7 in the stack clobbering the CPU's t7. As a result, two CPU's
would both point to the same per-CPU data and things would go downhill from
there.
Sleuthing help by: gallatin
- Add a new ddb command: 'show pcpu' similar to the i386 command added
recently. By default it displays the current CPU's info, but an optional
argument can specify the logical ID of a specific CPU to examine.
1) Set the FS_NEEDSFSCK flag when unexpected problems are encountered.
2) Clear the FS_NEEDSFSCK flag after a successful foreground cleanup.
3) Refuse to run in background when the FS_NEEDSFSCK flag is set.
4) Avoid taking and removing a snapshot when the filesystem is already clean.
5) Properly implement the force cleaning (-f) flag when in preen mode.
Note that you need to have revision 1.21 (date: 2001/04/14 05:26:28) of
fs.h installed in <ufs/ffs/fs.h> defining FS_NEEDSFSCK for this to compile.
bcopy would go off the end of the array by two elements, which sometimes
causes a panic if it happens to cross into a page that isn't mapped.
Submitted by: gibbs
Reviewed by: peter
It also has some instructions on how to setup the client and
the server. I have been using this code for over 2 years
on RELENG_3 and later RELENG_4. Have not tried on CURRENT, but
in case there are any issues these are in /etc/rc and
/etc/rc.diskless{12}
This allows you to determine if the file on the other side is the same
as the one you have without transferring the entire file to compare.
Needless to say, if the server end lies to you this check doesn't work,
but on the other hand, if it lies to you about the files checksum,
what can you trust from it ?
one user who differs only by case. The other perl tools assume (or enforce)
the all lowercase requirement, therefore making the search through
master.passwd case insensitive seemed a reasonable optimization, IMO.
I understand, although I do not sympathize with, the argument that someone
might want to do this on purpose, and might subsequently want to use the
wrong tool for the job. So, this fix should hopefully satisfy both camps.
/dev/log like this: if [ ! -h /dev/log ];
The man page for test(1) says that the -h switch is depracated and that
users should NOT rely on it being available. It suggest the -L switch instead.
They both do the same thing: check for the existence of the symbolic link.
PR: 26596
Submitted by: mikem <mike_makonnen@yahoo.com>
are some good reasons for not doing this, even if the linting of
the code breaks.
1) If lint were ever to understand the stuff inside the macros,
that would break the checks.
2) There are ways to use __GNUC__ to exclude overly specific
code.
3) (Not yet practical) Lint(1) needs to properlyu understand
all of te code we actually run.
Complained about by: bde
Education by: jake, jhb, eivind
Make listings of dc(4)-supported cards consistent with manpage
(submitted by fenner).
amr(4) supports the Dell PERC 3/DCL (submitted by
Vivek Khera <khera@kciLink.com>).
Properly capitalize "Ethernet" and variants thereof.
