This could lead to a division by zero if hardware is multi-core and/or
multi-threaded, but for some (quite unusual) reason FreeBSD sees only
one logical processor. This could happen, for example, if neither MADT
nor MP Table are presented by BIOS.
Also:
- assert in topo_probe_0x4 that BSP is accounted for
- neither cpu_cores nor cpu_logical should be zero after successful
probing, so either being zero is an indication of failed probing
Reported by: vwe, Dan Allen <danallen46@airwired.net>
Tested by: Dan Allen <danallen46@airwired.net>
MFC after: 3 days
- hw.usb.ucom.cons_unit is now split into
hw.usb.ucom.cons_unit/...cons_subunit.
Note: The tunable/sysctl hw.usb.ucom.cons_unit needs to be reviewed if
a) a console was defined a USB serial devices, and a USB device with
more than 1 subunit is present, and this device is attached before the
device functioning as a console
or
b) a console was defined on a USB device with more than 1 subunit
Reviewed by: hps
MFC after: 2 weeks
only, and should be protected with an ifdef, and the no-execute bit in
32-bit set_user_sr() should be set before the comparison, not after, or
it will never match.
of the EV_DONE flag and use the mutex to protect against losing wakeups
in g_waitfor_event().
Reported by: davidxu
Tested by: davidxu
Discussed on: freebsd-current
set_user_sr() itself caches the user segment VSID, there is no need for
cpu_switch() to do it again. This change also unifies the 32 and 64-bit
code paths for kernel faults on user pages and remaps the user SLB slot
on 64-bit systems when taking a syscall to avoid some unnecessary segment
exception traps.
dependency, then the dso never has its DAG initialized. Empty DAG
makes ref_dag() call in dlopen() a nop, and the dso refcount is off
by one.
Initialize the DAG on the first dlopen() call, using a boolean flag
to prevent double initialization.
From the PR (edited):
Assume we have a library liba.so, containing a function a(), and a
library libb.so, containing function b(). liba.so needs functionality
from libb.so, so liba.so links in libb.so.
An application doesn't know about the relation between these libraries,
but needs to call a() and b(). It dlopen()s liba.so and obtains a
pointer to a(), then it dlopen()s libb.so and obtains a pointer to b().
As soon as the application doesn't need a() anymore, it dlclose()s liba.so.
Expected result: the pointer to b() is still valid and can be called
Actual result: the pointer to b() has become invalid, even though the
application did not dlclose() the handle to libb.so. On calling b(), the
application crashes with a segmentation fault.
PR: misc/151861
Based on patch by: jh
Reviewed by: kan
Tested by: Arjan van Leeuwen <freebsd-maintainer opera com>
MFC after: 1 week
This moves the function of the noaliases variable into the checkkwd
variable. This way it is properly reset on errors and aliases can be used
normally in the commands for each case (the case labels recognize the
keyword esac but no aliases).
The new code is clearer as well.
Obtained from: dash
races - in this case a keepalive packet was send from wrong thread which
lead to connection dropping, because of corrupted packet.
Fix it by sending keepalive packets directly from the send thread.
As a bonus we now send keepalive packets only when connection is idle.
Submitted by: Mikolaj Golub <to.my.trociny@gmail.com>
MFC after: 3 days
a shorter message (userland generally only sees the first 6 to 8
characters) when waiting for the allproc lock. Use "-" when idle to math
the behavior of other kthreads.
Reviewed by: attilio
MFC after: 1 week
- Use > 2^32 - 1 instead of >= when checking for memory regions above 4G.
- Skip SMAP entries > 4G on i386 rather than breaking out of the loop
since SMAP entries are not guaranteed to be in order.
- Remove 'i' and loop over 'rid' directly in the dump_avail[] case.
- Only check for 4G regions in the dump_avail[] case on i386 if PAE is
enabled since vm_paddr_t is 32-bit in the !PAE case.
Submitted by: alc
I've noticed various terminal emulators that need to obtain a sane
default termios structure use very complex `hacks'. Even though POSIX
doesn't provide any functionality for this, extend our termios API with
cfmakesane(3), which is similar to the commonly supported cfmakeraw(3),
except that it fills the termios structure with sane defaults.
Change all code in our base system to use this function, instead of
depending on <sys/ttydefaults.h> to provide TTYDEF_*.
read_initial_length detects pointer size by checking first
4 bytes of .debug_line and stores it in struct comp_unit_head *
passed to it as second argument. By passing NULL to a
read_initial_length we ignore actual pointer size (8 bytes) and
use default (4 bytes) which results in wrong offsets of header fields.
to amd64, i386, and pc98. The headers are installed to /usr/include/x86
during an installworld, and an 'x86' symlink is created for kernel builds
similar to 'machine' so that the headers can be included as <x86/foo.h>.
Reviewed by: imp
and not something out of the early 1980s. Make sure all error
messages go to stderr, not stdout. Since there's error-handling code
to handle empty SEARCHPATHS and FILESYSTEMS, use the initialization
form that allows this error to be diagnosed. (hat tip: jilles@)
made it impossible to override PRUNEDIRS to make it empty. Use the
non-colon form to only set PRUNEDIRS if it is completely unset. (For
parallelism, the other configuration defaults here could be done the
same way, but that could be more obviously accomplished by disabling
updatedb in periodic.conf, so leave them alone for now.)
about but otherwise ignored. When allowing the master to be set manually via
ifconfig(8) by adding the former to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS
(as it should be) it seems to be unfavorable that a machine can be made to
panic with a simple ifconfig(8) invocation.