This is required by our FORTIFY_SOURCE implementation as it
does more inlining. As a rule of thumb, FORTIFY_SOURCE doubles
the number of inlines except that in grep inlining
blows up for some reason.
Assume that a vnode is mapped shared and mlocked(), and then the vnode
is truncated, or truncated and then again extended past the mapping
point EOF. Truncation removes the pages past the truncation point,
and if pages are later created at this range, they are not properly
mapped into the mlocked region, and their wiring count is wrong.
The revert leaves the invalidated but wired pages on the object queue,
which means that the pages are found by vm_object_unwire() when the
mapped range is munlock()ed, and reused by the buffer cache when the
vnode is extended again.
The changes in r173708 were required since then vm_map_unwire() looked
at the page tables to find the page to unwire. This is no longer
needed with the vm_object_unwire() introduction, which follows the
objects shadow chain.
Also eliminate OBJPR_NOTWIRED flag for vm_object_page_remove(), which
is now redundand, we do not remove wired pages.
Reported by: trasz, Dmitry Sivachenko <trtrmitya@gmail.com>
Suggested and reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
to no longer claim they are experimental.
Reviewed by: rwatson@, wblock@
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2985
b_kvabase when the buffer is reclaimed. Otherwise, if b_data for the
mapped buffer was adjusted with the page-offset portion of b_offset,
nothing would re-adjust the b_data, which breaks buffer management
code which expects page-aligned b_data (see e.g. bpman_qenter(), which
skips partial pages).
Fix a minor issue with the GB_KVAALLOC requests, which could result in
returning the mapped buffer if the reused buffer is mapped and have
the right amount of KVA reserved.
Improve assertion in the vfs_buf_check_mapped() to catch unmapped
buffers which have their b_data incorrectly adjusted with offset.
Reported and tested by: pho (previous version)
Reviewed by: jeff (previous version)
Sponsored by: The FreeBSD Foundation
but it's hard to find and easy to miss.
Reviewed by: wblock@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3183
Correctly escape literal % for display
This fixes segfaults in 32bit arches caused by r285734
Reviewed by: ngie
Approved by: dim
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3191
This is required in order for us to support deterministic mode by
default. If multiple -D or -U options are specified on the command
line, the final one takes precedence. GNU ar also uses -U for this.
An equivalent change will be applied to ELF Tool Chain's version of ar.
PR: 196929
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3175
uart_bus_attach() during its test that 20 iterations weren't sufficient
for clearing all pending interrupts, assuming this means that hardware
is broken and doesn't deassert interrupts. However, under pressure, 20
iterations also can be insufficient for clearing all pending interrupts,
leading to a panic as intr_event_handle() tries to schedule an interrupt
handler not registered. Solve this by introducing a flag that is set in
test mode and otherwise restores pre-r253161 behavior of uart_intr(). The
approach of additionally registering uart_intr() as handler as suggested
in PR 194979 is not taken as that in turn would abuse special pccard and
pccbb handling code of intr_event_handle(). [1]
- Const'ify uart_driver_name.
- Fix some minor style bugs.
PR: 194979 [1]
Reviewed by: marcel (earlier version)
MFC after: 3 days
raw data to the doorbell offset in order to clarify the intent and for
avoiding unnecessarily converting the endianess back and forth.
Unfortunately, the same can't be done in mpt_recv_handshake_reply() as
16-bit data needs to be read using 32-bit bus accessors.
- In mpt_recv_handshake_reply(), get rid of a redundant variable.
MFC after: 1 fortnight
from x86 to use smp_ipi_mtx spin lock not only for smp_rendezvous_cpus()
but also for the MD cache invalidation, TLB demapping and remote register
reading IPIs due to the following reasons:
- The cross-IPI SMP deadlock x86 otherwise is subject to can't happen on
sparc64. That's because on sparc64, spin locks don't disable interrupts
completely but only raise the processor interrupt level to PIL_TICK. This
means that IPIs still get delivered and direct dispatch IPIs such as the
cache invalidation etc. IPIs in question are still executed.
- In smp_rendezvous_cpus(), smp_ipi_mtx is held not only while sending an
IPI_RENDEZVOUS, but until all CPUs have processed smp_rendezvous_action().
Consequently, smp_ipi_mtx may be locked for an extended amount of time as
queued IPIs (as opposed to the direct ones) such as IPI_RENDEZVOUS are
scheduled via a soft interrupt. Moreover, given that this soft interrupt
is only delivered at PIL_RENDEZVOUS, processing of smp_rendezvous_action()
on a target may be interrupted by f. e. a tick interrupt at PIL_TICK, in
turn leading to the target in question trying to send an IPI by itself
while IPI_RENDEZVOUS isn't fully handled, yet, and, thus, resulting in a
deadlock.
o As mentioned in the commit message of r245850, on least some sun4u platforms
concurrent sending of IPIs by different CPUs is fatal. Therefore, hold the
reintroduced MD ipi_mtx also while delivering cross-traps via MI helpers,
i. e. ipi_{all_but_self,cpu,selected}().
o Akin to x86, let the last CPU to process cpu_mp_bootstrap() set smp_started
instead of the BSP in cpu_mp_unleash(). This ensures that all APs actually
are started, when smp_started is no longer 0.
o In all MD and MI IPI helpers, check for smp_started == 1 rather than for
smp_cpus > 1 or nothing at all. This avoids races during boot causing IPIs
trying to be delivered to APs that in fact aren't up and running, yet.
While at it, move setting of the cpu_ipi_{selected,single}() pointers to
the appropriate delivery functions from mp_init() to cpu_mp_start() where
it's better suited and allows to get rid of the global isjbus variable.
o Given that now concurrent IPI delivery no longer is possible, also nuke
the delays before completely disabling interrupts again in the CPU-specific
cross-trap delivery functions, previously giving other CPUs a window for
sending IPIs on their part. Actually, we now should be able to entirely get
rid of completely disabling interrupts in these functions. Such a change
needs more testing, though.
o In {s,}tick_get_timecount_mp(), make the {s,}tick variable static. While not
necessary for correctness, this avoids page faults when accessing the stack
of a foreign CPU as {s,}tick now is locked into the TLBs as part of static
kernel data. Hence, {s,}tick_get_timecount_mp() always execute as fast as
possible, avoiding jitter.
PR: 201245
MFC after: 3 days
If apropos(1) and whatis(1) are not hardlinks to man(1) that means the system is
using mandocdb, then man -k should spawn apropos(1) and/or whatis(1) directly
Reported by: kevlo
Tested by: kevlo
Sponsored by: gandi.net
Summary:
Unlike FreeBSD, CloudABI does not use null terminated strings for its
pathnames. Introduce a function called copyin_path() that can be used by
all of the filesystem system calls that use pathnames. This change
already implements the system calls that don't depend on any additional
functionality (e.g., conversion of struct stat).
Also implement the socket system calls that operate on pathnames, namely
the ones used by the C library functions bindat() and connectat(). These
don't receive a 'struct sockaddr_un', but just the pathname, meaning
they could be implemented in such a way that they don't depend on the
size of sun_path. For now, just use the existing interfaces.
Add a missing #include to cloudabi_syscalldefs.h to get this code to
build, as one of its macros depends on UINT64_C().
Test Plan:
These implementations have already been tested in the CloudABI branch on
GitHub. They pass all of the tests.
Reviewers: kib, pjd
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D3097
- Use pointer assignment rather than a combination of pointers and
flags to switch buffers between unmapped and mapped. This eliminates
multiple flags and generally simplifies the logic.
- Eliminate b_saveaddr since it is only used with pager bufs which have
their b_data re-initialized on each allocation.
- Gather up some convenience routines in the buffer cache for
manipulating buf space and buf malloc space.
- Add an inline, buf_mapped(), to standardize checks around unmapped
buffers.
In collaboration with: mlaier
Reviewed by: kib
Tested by: pho (many small revisions ago)
Sponsored by: EMC / Isilon Storage Division
In the CloudABI code I sometimes call into cap_rights_* without
providing any arguments. Though one could argue that this doesn't make
sense, in this specific case it's hard to avoid, as the rights that
should be tested against are forwarded by a couple of wrapper macros.
most recently used buffer when we are under paging pressure. This is
a perversion of the buffer and page replacement algorithms and recent
improvements to the page daemon have rendered it unnecessary. In the
event that low-memory deadlocks become an issue it would be possible
to make a daemon or event handler that performs a similar action on
the oldest buffers rather than the newest. Since the buf cache
is analogous to the page cache and some minimum working set is desired
another possibility is to simply shrink the minimum working set which
has less downside now that file pages are not directly mapped.
Sponsored by: EMC / Isilon
Reviewed by: alc, kib (with some minor objection)
Tested by: pho
