so that it can be reused elsewhere (there is a number of places
where it can be useful). This also trims some 200 lines from
the body of ip_output(), which helps readability a bit.
(This change was discussed a few weeks ago on the mailing lists,
Julian agreed, silence from others. It is not a functional change,
so i expect it to be ok to commit it now but i am happy to back it
out if there are objections).
While at it, fix some function headers and replace m_copy() with
m_copypacket() where applicable.
MFC after: 1 week
2. Avoid referencing bcopy() and bzero(), since they may not be in
scope.
Request by: bde (1)
Submitted by: wollman (2)
Reviewed by: archie, bde
PR: 43270
Replace m_copy() with m_copypacket() where applicable.
Replace "if (a.s_addr ...)" with "if (a.s_addr != INADDR_ANY ...)"
to make it clear what the code means.
While at it, fix some function headers and remove 'register' from
variable declarations.
MFC after: 3 days
trigger a breakpoint with this chip.
- Fiddle the right bits in the cn input and output routines to disable port
interrupts and enable visibility of the masked interrupt status bits.
- Register a shutdown final event handler to put the chip back in the mode
that the prom expects.
kern.threads.max_threads_per_proc
kern.threads.max_groups_per_proc
2.Temporary disable borrower thread stash itself as
owner thread's spare thread in thread_exit(). there
is a race between owner thread and borrow thread:
an owner thread may allocate a spare thread as this:
if (td->td_standin == NULL)
td->standin = thread_alloc();
but thread_alloc() can block the thread, then a borrower
thread would possible stash it self as owner's spare
thread in thread_exit(), after owner is resumed, result
is a thread leak in kernel, double check in owner can
avoid the race, but it may be ugly and not worth to do.
I've no idea if this is the right behavior for the library, but this
at least fixes the build, and matches what seems to be alfred's intent
in the commit message for 1.19.
sysconf.c:
Use 'break' rather than 'goto yesno' in sysconf.c so that we report a '0'
return value from the kernel sysctl.
vfs_aio.c:
Make aio reset its configuration parameters to -1 after unloading
instead of 0.
posix4_mib.c:
Initialize the aio configuration parameters to -1
to indicate that it is not loaded.
Add a facility (p31b_iscfg()) to determine if a posix4 facility has been
initialized to avoid having to re-order the SYSINITs.
Use p31b_iscfg() to determine if aio has had a chance to run yet which
is likely if it is compiled into the kernel and avoid spamming its
values.
Introduce a macro P31B_VALID() instead of doing the same comparison over
and over.
posix4.h:
Prototype p31b_iscfg().
Both are atomic, but the cmpxchg has memory ordering hints. We
give this acquire semantics.
NOTE: The unlock in libc_r is implemented by a "normal" assign
statement. This is not correct on ia64 due to the memory ordering
characteristics of the architecture. We need release semantics
for an unlock.
NTP on FreeBSD:
The first one allows one to avoid installing the html files.
The second one allows one to override the CLOCKDEFS on the
make command line.
Submitted by: phk
libc. I want to keep these in some version for the thread
library/ies, but don't know whether to have them repo-copied
to libc_r or renamed and kept in libc.
Change the name of an alpha macro that was changed with the
system call commit.
Previously these were libc functions but were requested to
be made into system calls for atomicity and to coalesce what
might be two entrances into the kernel (signal mask setting
and floating point trap) into one.
A few style nits and comments from bde are also included.
Tested on alpha by: gallatin
subsystems capabilities:
_SC_AIO_LISTIO_MAX returns the default of _POSIX_AIO_LISTIO_MAX
_SC_AIO_MAX returns the default _POSIX_AIO_MAX
_SC_AIO_PRIO_DELTA_MAX returns the default of 0
Without these adjustments the values returned are -1 even when the
aio side of the kernel returns '0' for them which is incorrect.
Noticed by: Craig Rodrigues <rodrigc@attbi.com>
No functional changes, but:
+ the mrouting module now should behave the same as the compiled-in
version (it did not before, some of the rsvp code was not loaded
properly);
+ netinet/ip_mroute.c is now truly optional;
+ removed some redundant/unused code;
+ changed many instances of '0' to NULL and INADDR_ANY as appropriate;
+ removed several static variables to make the code more SMP-friendly;
+ fixed some minor bugs in the mrouting code (mostly, incorrect return
values from functions).
This commit is also a prerequisite to the addition of support for PIM,
which i would like to put in before DP2 (it does not change any of
the existing APIs, anyways).
Note, in the process we found out that some device drivers fail to
properly handle changes in IFF_ALLMULTI, leading to interesting
behaviour when a multicast router is started. This bug is not
corrected by this commit, and will be fixed with a separate commit.
Detailed changes:
--------------------
netinet/ip_mroute.c all the above.
conf/files make ip_mroute.c optional
net/route.c fix mrt_ioctl hook
netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here
together with other rsvp code, and a couple
of indentation fixes.
netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks
netinet/ip_var.h rsvp function hooks
netinet/raw_ip.c hooks for mrouting and rsvp functions, plus
interface cleanup.
netinet/ip_mroute.h remove an unused and optional field from a struct
Most of the code is from Pavlin Radoslavov and the XORP project
Reviewed by: sam
MFC after: 1 week
the deprecated utime(3). utimes(2) uses timeval, but utime(3) uses
time_t's. If you do bad things (like I did) by mixing up include files
with libc, then install can do strange things if you mismatch the time_t
stuff. utime() is emulated entirely within libc.
Approved by: re (jhb)
time_t. Deal with the possibility that time_t != int32_t. This boils
down to this sort of thing:
- time(&ut.ut_time);
+ ut.ut_time = time(NULL);
and similar for ctime(3) etc. I've kept it minimal for the stuff
that may need to be portable (or 3rd party code), but used Matt's time32
stuff for cases where that isn't as much of a concern.
Approved by: re (jhb)
to worry about ABI vs released systems yet. This is mostly transparent
since there is no significant exposure in the syscall interface. The
things that go wrong are mostly userland stuff - time(&intvariable).
Reviewed by: dfr, marcel
Approved by: re (jhb)
more manageable.
- Add some helper variables (CVS_{SRC,DOC,PORTS}ARGS) to be used when
using CVS to checkout files. We stick release tags in these helper
variables if they are defined and then use only one cvs command instead
of two cvs commands with an .ifdef to choose between them.
- rm the old src/doc/ports directories as separate commands from the
CVS comands so that the rm commands don't need to be duplicated.
- Simplify the DOMINIMALDOCPORTS case by overriding RELEASEPORTSMODULE to
be ${MINIMALDOCPORTS} thus removing yet another nearly-duplicate cvs
command in an .ifdef.
- Add support for grabbing src/ and doc/ from external directories
specified via EXTSRCDIR and EXTDOCDIR instead of from CVS. The same
is not done for ports/ quite yet as the DOMINIMALDOCPORTS case is a
bit tricky.
The rerelease target scripts have not been changed to use the helper
variables yet, so there is still some room for improvement.
Submitted by: kuriyama (4)
