- Add a new apic_alloc_vectors() method to the local APIC support code
to allocate N contiguous IDT vectors (aligned on a M >= N boundary).
This function is used to allocate IDT vectors for a group of MSI
messages.
- Add MSI and MSI-X PICs. The PIC code here provides methods to manage
edge-triggered MSI messages as x86 interrupt sources. In addition to
the PIC methods, msi.c also includes methods to allocate and release
MSI and MSI-X messages. For x86, we allow for up to 128 different
MSI IRQs starting at IRQ 256 (IRQs 0-15 are reserved for ISA IRQs,
16-254 for APIC PCI IRQs, and IRQ 255 is reserved).
- Add pcib_(alloc|release)_msi[x]() methods to the MD x86 PCI bridge
drivers to bubble the request up to the nexus driver.
- Add pcib_(alloc|release)_msi[x]() methods to the x86 nexus drivers that
ask the MSI PIC code to allocate resources and IDT vectors.
MFC after: 2 months
- Add 3 new functions to the pci_if interface along with suitable wrappers
to provide the device driver visible API:
- pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count'
here is an in and out parameter. The driver stores the desired number
of messages in '*count' before calling the function. On success,
'*count' holds the number of messages allocated to the device. Also on
success, the driver can access the messages as SYS_RES_IRQ resources
starting at rid 1. Note that the legacy INTx interrupt resource will
not be available when using MSI. Note that this function will allocate
either MSI or MSI-X messages depending on the devices capabilities and
the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note
that the driver should activate the memory resource that holds the
MSI-X table and pending bit array (PBA) before calling this function
if the device supports MSI-X.
- pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function
releases the messages allocated for this device. All of the
SYS_RES_IRQ resources need to be released for this function to succeed.
- pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns
the maximum number of MSI or MSI-X messages supported by this device.
MSI-X is preferred if present, but this function will honor the
'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function
should return the largest value that pci_alloc_msi() can return
(assuming the MD code is able to allocate sufficient backing resources
for all of the messages).
- Add default implementations for these 3 methods to the pci_driver generic
PCI bus driver. (The various other PCI bus drivers such as for ACPI and
OFW will inherit these default implementations.) This default
implementation depends on 4 new pcib_if methods that bubble up through
the PCI bridges to the MD code to allocate IRQ values and perform any
needed MD setup code needed:
- PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages.
- PCIB_RELEASE_MSI() releases a group of MSI messages.
- PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message.
- PCIB_RELEASE_MSIX() releases a single MSI-X message.
- Add default implementations for these 4 methods that just pass the
request up to the parent bus's parent bridge driver and use the
default implementation in the various MI PCI bridge drivers.
- Add MI functions for use by MD code when managing MSI and MSI-X
interrupts:
- pci_enable_msi(dev, address, data) programs the MSI capability address
and data registers for a group of MSI messages
- pci_enable_msix(dev, index, address, data) initializes a single MSI-X
message in the MSI-X table
- pci_mask_msix(dev, index) masks a single MSI-X message
- pci_unmask_msix(dev, index) unmasks a single MSI-X message
- pci_pending_msix(dev, index) returns true if the specified MSI-X
message is currently pending
- Save the MSI capability address and data registers in the pci_cfgreg
block in a PCI devices ivars and restore the values when a device is
resumed. Note that the MSI-X table is not currently restored during
resume.
- Add constants for MSI-X register offsets and fields.
- Record interesting data about any MSI-X capability blocks we come
across in the pci_cfgreg block in the ivars for PCI devices.
Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X)
Reviewed by: scottl, grehan, jfv
MFC after: 2 months
- Remove an extra entry from the array for 0x0f prefixed instruction groups.
This fixes decoding of instructions where the second opcode >= 0x80.
- Add support for the 64-bit immediate mov instructions.
- When short_addr is enabled, don't parse the modr/m byte for a 16-bit
address, but as a 32-bit address.
- Support %rip relative addressing.
- Don't print a displacement of 0 if there is a base or index register.
MFC after: 3 days
of NKPT is no longer enough to run amd64 with 16G of RAM, as it
doesn't have space for mapping a kernel (16M kernel would require
additionally 8 page tables).
We are not yet aware of the protocol internals but this way
SCTP traffic over v6 will not be discarded.
Reported by: Peter Lei via rrs
Tested by: Peter Lei <peterlei cisco.com>
- make document title match filename;
- remove hard sentence breaks, whitespace at EOL, and double whitespace;
- sort SEE ALSO xrefs, adding missing section numbers;
- fix a misspelled macro name.
as `packed'.
The C standard leaves the alignment of individual members of a C
struct upto the implementation, so pedantically speaking portable
code cannot assume that the layout of a `struct ar_hdr' in memory
will match its layout in a file. Using a __packed attribute
declaration forces file and memory layouts for this structure to
match.
Submitted by: ru
- Reword some sentences
- Use .Cm for arguments
- s/CAVEAT/CAVEATS/
Based on PR: docs/78174
Submitted by: Jeremy Chadwick <freebsd@jdc.parodius.com>
Reviewed by: brueffer
Approved by: emax (mentor)
MFC after: 3 days
* Use public API, don't access struct archive directly. (People should be able to copy these into their applications as a template for custom I/O callbacks.)
* Set "skip" only for regular files. ("skip" allows the low-level library to catch attempts to add an archive to itself or extract over itself.)
* Simplify the write_open functions by just calling stat() at the beginning. Somehow, these functions had acquired some complex logic that tried to avoid the stat() call but never succeeded.
MFC after: 10 days
file. This doesn't happen in normal use, because the file I/O and
decompression layers only pass through smaller blocks. It can happen
with custom read functions that block I/O in larger blocks.
written to the socket). The rewrite in revision 1.240 got confused by the
FreeBSD 4.x bug compatibility code.
For some reason lighttpd, that was used for testing the new sendfile code,
was not affected by the problem but apache and others using headers/trailers
in the sendfile call received incorrect sbytes values after return from non-
blocking sockets. This then lead to restarts with wrong offsets and thus
mixed up file contents when the socket was writeable again. All programs
not using headers/trailers, like ftpd, were not affected by the bug.
Reported by: Pawel Worach <pawel.worach-at-gmail.com>
Tested by: Pawel Worach <pawel.worach-at-gmail.com>
Using either one of the two would result in an empty protos[]
array, and no sockets were actually listed:
% sockstat -4
USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS
% sockstat -6
USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS
%
Fix this bug by tweaking appropriately the logic of handling opt_4,
opt_6, opt_u and protos_defined.
Submitted by: des
Pointy hat: keramida
want to confuse people at the very beginning.
Sync TOC/paragraph numbers in the text.
Requested by: Benedikt Stockebrand during his talk at EuroBSDCon 2006
Reviewed by: gnn
The eui64.[ch] and ipv6cp.[ch] were taken from ppp-2.3.11.
However, our stock pppd(8) doesn't provide option_t nor some
utility functions. So, I made some hacks to adjust to our
stock pppd(8).
The sys_bsd.c part was taken from NetBSD with some
modifications to adjust to our stock pppd(8).
MFC after: 1 week
not being aquired. This meant that when we cleanup
the outbound we may have one in transit to be
added with the old sequence number. This is bad
since then we loose a message :(
Also the report_outbound needed to have the right
lock when its called which it did not.. I added
the lock with of course a flag since we want to
have the lock before we call it in the restart
case.
This also fixed the FIX ME case where, in the cookie
collision case, we mark for retransmit any that
were bundled with the cookie that was dropped.
This also means changes to the output routine
so we can assure getting the COOKIE-ACK sent
BEFORE we retransmit the Data.
Approved by: gnn
behavior of sockstat(1) will still be to show "udp", "tcp" and
"divert" protocols, but we can now provide a (comma-separated)
list of protocols, as in:
% sockstat -P tcp
to list only TCP sockets, or we can filter more than one protocol
by separating the protocol names with a comma:
% sockstat -P tcp,udp
Protocol names are parsed with getprotobyname(3), so any protocol
whose name is listed in `/etc/protocols' should work fine.
Submitted by: Josh Carroll <josh.carroll@psualum.com>
Approved by: des
