MS-DOS partition. This will help with transitioning to
a single arm/armv6 userland build which could be used for
all FreeBSD/armv6 images without UBLDR_LOADADDR being set
for each board (ultimately requiring a separate buildworld
for each currently).
Requested by: ian
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
While 480M is sufficient for 10-STABLE, 11-CURRENT images at
this size fail due to insufficient space.
This commit is solely for the sake of getting updated snapshot
builds out, after which I'll analyze the resulting images to
figure out what a more sane value is, even if the image size
for 11-CURRENT needs to differ from 10-STABLE.
Sponsored by: The FreeBSD Foundation
Since the images are effectively mostly zeros at 1G,
reduce the size to allow installation on smaller SD
cards, such as 512Mb.
While here, stop writing the /boot.txt file on the
WANDBOARD, which isn't used anyway.
Discussed with: imp
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Help from: many (boot testing, feedback, etc.)
Sponsored by: The FreeBSD Foundation
since it supports all of these board variants.
While here, remove the WANDBOARD-{QUAD,SOLO,DUAL} kernel
configuration files.
Discussed with: ian
Sponsored by: The FreeBSD Foundation
error:
root@releng2:/ # mount_msdosfs /dev/md5s1 /usr/obj/usr/src/release/WANDBOARD-QUAD/fat
mount_msdosfs: /dev/md5s1: File name too long
Sponsored by: The FreeBSD Foundation
Ian informed me a few months ago that the WANDBOARD-* kernels will
eventually be combined into one that will work across all these
boards, but for now, build them individually.
Sponsored by: The FreeBSD Foundation
building arm images. This is similar to tools/vmimage.subr
used for building virtual machine disk images. By default,
only arm_create_disk() and arm_install_base() contain real
functionality here, and arm_install_uboot() must be overridden
in the arm/KERNEL.conf file.
In release.sh, make create_arm_armv6_build_release() do
something now.
In arm/BEAGLEBONE.conf, set IMAGE_SIZE, PART_SCHEME, FAT_SIZE,
FAT_TYPE, and MD_ARGS, as well as make arm_install_uboot()
functional.
Parts of this were taken from disecting a previous BEAGLEBONE
image, and other parts obtained from Crochet sources.
Sponsored by: The FreeBSD Foundation
EMBEDDEDBUILD, EMBEDDED_TARGET, EMBEDDED_TARGET_ARCH,
EMBEDDEDPORTS, and KERNEL.
In release.sh, set TARGET and TARGET_ARCH to the
EMBEDDED_* variants from the configuration file.
Sponsored by: The FreeBSD Foundation
sysutils/u-boot-beaglebone port:
- In arm/BEAGLEBONE.conf, set EMBEDDEDPORTS to the
sysutils/u-boot-beaglebone port.
- In arm/release.sh, remove BEAGLEBONE from setting WANT_UBOOT
- In tools/arm/crochet-BEAGLEBONE.conf, override the
beaglebone_check_uboot(), and set BEAGLEBONE_UBOOT to
/tmp/external/u-boot-beaglebone, and create symlinks to the
u-boot files in /usr/local/share/u-boot-beaglebone and the
uEnv.txt file in crochet/board/Beaglebone/files.
Sponsored by: The FreeBSD Foundation
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
Thanks to: loos@
Sponsored by: The FreeBSD Foundation
