Peter Wemm
476b25e22e
Use the correct (relative to the implementation) ordering of args in
...
the VOP_LINK() calls, Closes PR#3064
Submitted by: bde
1997-03-25 05:13:40 +00:00
Peter Wemm
289c56e81e
The local fs interface does not allow link()/unlink() of directories,
...
do not allow a remote nfs client to cause local fs corruption either.
1997-03-25 05:08:28 +00:00
Hiroyuki Hanai
ff26e1340f
Catch up with the original.
1997-03-25 05:03:47 +00:00
Steve Passe
2fab5f6edd
"Louis A. Mamakos" <louie@TransSys.COM> new bt848 struct
...
Randall Hopper <rhh@ct.picker.com> GHUE/GBRIGHT bug
Louis Mamakos made a new bt848 struct, including massive changes to the entire
body of code, substituting array offsets with struct members.
Randall Hopper aadded fixes of BT848_GHUE & BT848_GBRIG.
I (fsmp):
added polled hardware i2c routines,
removed all existing software i2c routines.
added eeprom support.
1997-03-25 04:18:24 +00:00
Andrey A. Chernov
588a8fcc98
Use FreeBSD-style attach message
1997-03-25 04:16:25 +00:00
Steve Passe
0e23e1a104
added support for EEProms writing/reading.
1997-03-25 04:11:13 +00:00
Mike Pritchard
42946c8261
Remove some incorrect text on how passwords are validated.
...
Closes PR# 3050.
Submitted by: Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1997-03-25 03:45:52 +00:00
Mike Pritchard
eb5ca91408
Change the description of how attempts to block SIGKILL and SIGSTOP
...
are handled. The system call will actually fail in this case - the
system doesn't silently ignore the request. Closes PR# 3047
Pointed out by: fenner
1997-03-25 03:39:54 +00:00
Andrey A. Chernov
0baa5ad9b2
Use port? for sbxvi0 since it is autoconfigured from sb0
...
Change sb0 irq from 7 to 5 since 5 is Creative default now.
1997-03-25 03:38:33 +00:00
Andrey A. Chernov
8c41947662
Copy io_base configuration address from sb config.
...
This change is cosmetique.
1997-03-25 03:32:31 +00:00
Andrey A. Chernov
e4960ae4f5
Replace more verbose "at <not configured>" with less verbose "at ?",
...
we don't need much attention here, because this diagnostic printed first
and then card will be configured.
1997-03-25 03:29:40 +00:00
Andrey A. Chernov
70b57d05df
Follow config intention for iobase:
...
print "at <not configured>" for iobase == -1 (autodetect not happens)
and not print anything for iobase == -2 (none)
Old code treat this two special config numbers as big port numbers.
1997-03-25 03:13:05 +00:00
Jordan K. Hubbard
38abfbea7d
YAMF22
1997-03-25 03:12:59 +00:00
Andrey A. Chernov
aab4ac4dad
Print negative values only for two cases used
...
in config for iobase: -1 (auto) and -2 (none)
Other values are printed as big port numbers
1997-03-25 02:54:34 +00:00
Andrey A. Chernov
3be1497f41
Fix iobase printing for autodetect and none cases
...
(negative numbers was printed as very big ports)
1997-03-25 02:35:12 +00:00
Joerg Wunsch
3247194d54
Mention top(1) being part of the base system now.
1997-03-25 00:08:53 +00:00
Joerg Wunsch
3a0d8e274e
top(1) has a tunable parameter for the hash size to hash the user
...
entries. Mention it in make.conf.
1997-03-25 00:04:33 +00:00
David Nugent
117ffcde76
Remove unneeded prototype (and warning) for stlintr().
1997-03-24 21:38:51 +00:00
David Nugent
d8a7b3477f
strdup() value of term to correctly preserve contents.
...
Rearrange validation logic so that it works correctly when
compiled with kerberos support. Closes PR#3056.
1997-03-24 21:22:12 +00:00
Mike Pritchard
e71e7150fd
Typo police. Also update HISTORY to reflect when this first appeared
...
in FreeBSD.
1997-03-24 20:50:57 +00:00
Justin T. Gibbs
c2df2e4bc2
Fix a fencepost error in ahc_find_scb that could cause us to wrongfully
...
find an SCB still down on the card that was paged out. This only affects
error recovery.
Submitted by: Daniel M. Eischen <deischen@iworks.InterWorks.org>
1997-03-24 17:42:25 +00:00
Andrey A. Chernov
c49659eaa6
Initialize RNG only once
...
Use srandomdev() now
1997-03-24 16:10:26 +00:00
Andrey A. Chernov
6a95b13d8d
Use srandomdev() to initialize RNG
1997-03-24 16:01:46 +00:00
Andrey A. Chernov
c59856210e
Include missing <time.h>
...
Add missing RNG initialization
Use srandomdev() for RNG initialization
1997-03-24 15:51:11 +00:00
Andrey A. Chernov
cb78754c12
Cleanup STANDALONE stuff
...
Not replace malloc() family for non-standalone variant
Pay attention on malloc() family return code now
Use srandomdev() now for RNG initialization
1997-03-24 15:43:36 +00:00
Andrey A. Chernov
a200d18a76
Initialize RNG only once
...
Use srandomdev() now
1997-03-24 15:09:41 +00:00
Andrey A. Chernov
42a7afc08c
Use srandomdev() now
1997-03-24 14:52:51 +00:00
Andrey A. Chernov
f31679a94b
Use srandomdev() to initialize generator
1997-03-24 14:39:24 +00:00
Andrey A. Chernov
d9c406718c
Remove libcurses, it is pure termcap application
1997-03-24 14:29:46 +00:00
Bruce Evans
e4602ad9e5
Don't include <sys/ioctl.h> in the kernel. Stage 10 (final). Warn if
...
<sys/ioctl.h> is included in the kernel. It still compiles.
This set of changes reduces the number of dependencies in LINT/.depend
from about 31000 to about 30000. This should make LINT kernels
compile a whole 1% faster. Further reductions to less than 20000
dependencies can easily be made. E.g., 20 headers of nested spam
from <sys/param.h> for 500 object files gives 10000 dependencies;
less than half of these are real.
1997-03-24 12:48:46 +00:00
Bruce Evans
3a32c6706b
Don't include <sys/ioctl.h> in the kernel. Stage 9: same changes
...
in pc98 as in isa.
1997-03-24 12:29:48 +00:00
Bruce Evans
528f627f00
Don't include <sys/ioctl.h> in the kernel. Stage 6: include
...
<sys/filio.h>, <sys/sockio.h> and <sys/ttycom.h> instead of
<sys/ioctl.h> in a couple of files. This is still only 1/3
as spammish as <sys/ioctl.h> - 5 or 6 old tty ioctl headers
aren't needed.
1997-03-24 12:12:36 +00:00
Bruce Evans
afd2f6c218
Don't include <sys/ioctl.h> in the kernel. Stage 5: include
...
<sys/ioctl_compat.h> and sometimes <sys/filio.h> instead of
<sys/ioctl.h> in tty-related files. <sys/ttycom.h> is still
usually imported bogusly via <sys/termios.h>.
1997-03-24 12:03:06 +00:00
Bruce Evans
2098241054
Don't include <sys/ioctl.h> in the kernel. Stage 4: include
...
<sys/ttycom.h> and sometimes <sys/filio.h> instead of <sys/ioctl.h>
in miscellaneous files. Most of these files have nothing to do
with ttys but need to include <sys/ttycom.h> to get the definitions
of TIOC[SG]PGRP which are (ab)used to convert F[SG]ETOWN fcntls into
ioctls.
1997-03-24 11:52:29 +00:00
Bruce Evans
71455815cc
Don't include <sys/ioctl.h> in the kernel. Stage 3: include
...
<sys/filio.h> instead of <sys/ioctl.h> in non-network non-tty files.
1997-03-24 11:37:53 +00:00
Bruce Evans
51a534883a
Don't include <sys/ioctl.h> in the kernel. Stage 2: include
...
<sys/sockio.h> instead of <sys/ioctl.h> in network files.
1997-03-24 11:33:46 +00:00
Bruce Evans
fce002fdef
Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
...
it when it is not used. In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Bruce Evans
cb07fc9803
Don't default to (wrong) SCO definitions for _IOR() etc. if <sys/ioctl.h>
...
doesn't happen to be included before this header.
This header was missed in previous cleanups because it didn't include
<sys/ioctl.h> or <sys/ioccom.h>. Clean it now:
- #include <sys/types.h> since it is necessary to make the header self-
sufficient (there are a couple of u_char's).
- uniformized idempotency ifdef. Copied the style in the 4.4Lite
ioctl headers.
1997-03-24 11:07:52 +00:00
David Nugent
e825ea20dd
Make stlintr() public to allow correct linkage.
1997-03-24 07:25:31 +00:00
KATO Takenori
5fa4a05818
Fix typo.
...
Submitted by: Bruce Evans <bde@zeta.org.au>
1997-03-24 07:23:05 +00:00
KATO Takenori
507cf9c96e
Merge PC-98 code int i386/isa/ft.c.
1997-03-24 07:20:35 +00:00
Warner Losh
6e42740802
Don't overflow buffers, and only open alternative termcap files if we're
...
not running setuid or setgid.
Fixes PR 2586
Submitted by: Julian Assange
1997-03-24 06:41:30 +00:00
Warner Losh
3f2c98c480
Don't honor LANG or NLSPATH if we're setuid/setgid.
...
Fixes PR 2582
Submitted by: Julian Assange
1997-03-24 06:15:07 +00:00
Warner Losh
79d71652cf
If we're running setuid/setguid then don't open the host alias file to
...
prevent information leakage.
Closes PR 2578
Submitted by: Julian Assange
1997-03-24 06:11:44 +00:00
Warner Losh
418d4a9817
Don't open the tz file if we're running setuid or setgid to prevent infomration
...
leakage.
Submitted by: Julian Assange
1997-03-24 06:09:50 +00:00
Warner Losh
fca08b7cfa
Fix non explloitable buffer overflows (since the largest packet processed
...
precludes it) to keep people from whining about it in the newsgroups and
mailing lists.
1997-03-24 06:04:08 +00:00
Warner Losh
0f5e6a0d00
Fix various buffer overflows that may or may not be exploitable.
...
Fixes PR 2588
Reviewed by: Dan Cross?
Submitted by: Julian Assange
1997-03-24 06:01:39 +00:00
Warner Losh
a51e2c9b04
Julian A's fix. Do chdir as user rather than as root. Fixes a minor NFS
...
compatibility problem at the same time. Some buffer made large enough
for worst case hostname.
fixes PR 2593.
Reviewed by: Dan Cross and maybe others
1997-03-24 05:57:28 +00:00
Warner Losh
94cf2e751d
Fix small race window when creating portal socket.
...
Obtained from: OpenBSD
1997-03-24 05:53:12 +00:00
Warner Losh
f85d627937
Buffer overflow from Keith Bostic.
...
Obtained from: BSDi by way of Keith Bostic
1997-03-24 05:51:59 +00:00