This sshd_config keyword was replaced by KbdInteractiveAuthentication in
openssh 8.7, though ChallengeResponseAuthentication is silently accepted
as an alias. However, this means that the code in ec2.conf which
modifies a commented-out line no longer does anything. Apply a minimal
fix.
Reviewed by: cperciva, emaste
Sponsored by: The FreeBSD Foundation
(cherry picked from commit c1b656ac55)
This change enables the user to control 2.5G and 5G autonegotiation
speeds via advertise_speed sysctl for X550T devices. Due to reported
interoperability issues with switches, 2.5G and 5G speeds will not be
advertised by default.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Co-authored-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Tested by: gowtham.kumar.ks@intel.com
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D26245
(cherry picked from commit d381c80751)
This patch adds checks of a VF link state provided by PF via mailbox
API. Such change enables the PF to disable a VF administratively.
Since command needed by the PF to control the VF is introduced in
mailbox api version 1.2, this patch also bumps supported mailbox api
version to 1.2.
Co-authored-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed By: kbowling@
Tested by: lukasz.szczepaniak@intel.com
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D32004
(cherry picked from commit a3e719bbc2)
- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024
(cherry picked from commit 56429daea2)
(cherry picked from commit 61d83041ab)
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
(cherry picked from commit e438f0a975)
Adds a new function pointer to struct if_txrx in order to allow
drivers to set their own function that will determine which queue
a packet should be sent on.
Since this includes a kernel ABI change, bump the __FreeBSD_version
as well.
(This motivation behind this is to allow the driver to examine the
UP in the VLAN tag and determine which queue to TX on based on
that, in support of HW TX traffic shaping.)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@, stallamr@netapp.com
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D31485
(cherry picked from commit 213e91399b)
This should unbreak the kernel build when "options RSS" is
defined in the kernel configuration, and make the feature work.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reported by: adrian@
Sponsored by: Intel Corporation
(cherry picked from commit 5577aa338a)
Since iavf(4) no longer shares code with ixl(4) as of commit
f2fbd56a8d07665bc0a5e8b7e40026b50a591e2a and now has its own directory,
remove these now-unused iavf(4)-only files.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28638
(cherry picked from commit 409b36ad91)
The iavf(4) driver now uses a different source base from ixl(4), since
it will be the standard VF driver for new Intel Ethernet products going
forward, including ice(4). It continues to use the iflib framework
for network drivers.
Since it now uses a different source code base, this commit adds a new
sys/dev/iavf entry, but it re-uses the existing module name so no
configuration changes are necessary.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@
Tested by: lukasz.szczepaniak@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28636
(cherry picked from commit ca853dee3b)
Includes various feature improvements and bug fixes.
Notable changes include:
- Firmware logging support
- Link management flow changes
- New sysctl to report aggregated error counts
- Health Status Event reporting from firmware (Use the new read-only
tunables hw.ice.enable_health_events / dev.ice.#.enable_health_events
to turn this off)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
(cherry picked from commit 9cf1841c4a)
This version is intended to be used with the 0.29.4 version of the
ice(4) driver, which will be be committed afterwards.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: stallamr_netapp.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30887
(cherry picked from commit 538ef055b7)
(cherry picked from commit 070f7812da)
In 4f6c66cc9c, ifa_ifwithnet() was changed to no longer
ifa_ref() the returned ifaddr, and instead the caller was required
to stay in the net_epoch for as long as they wanted the ifaddr
to remain valid. However, this missed the case where an AF_LINK
lookup would call ifaddr_byindex(), which still does ifa_ref()
the ifaddr. This would cause a refcount leak.
Fix this by inlining the relevant parts of ifaddr_byindex() here,
with the ifa_ref() call removed. This also avoids an unnecessary
entry and exit from the net_epoch for this case.
I've audited all in-tree consumers of ifa_ifwithnet() that could
possibly perform an AF_LINK lookup and confirmed that none of them
will expect the ifaddr to have a reference that they need to
release.
MFC after: 2 months
Sponsored by: Dell Inc
Differential Revision: https://reviews.freebsd.org/D28705
Reviewed by: melifaro
(cherry picked from commit 5adea417d4)
VGA hardware provides many different graphics and data access modes,
each with different capabilities and limitations.
VGA vt(4) graphics mode operates on blocks of pixels at a time. When a
given pixel block contains only two colours the vt_vga driver uses write
mode 3. When the block contains more than two colours it uses write
mode 0. This is done because two-colour write mode 3 is much more
efficient.
In practice write mode 3 is used most of the time, as there is often a
single foreground colour and single background colour across the entire
console. One common exception requiring the use of mode 0 is when the
mouse cursor is drawn over a background other than black, as we need
black and white for the cursor in addition to the background colour.
VGA's default 16-colour palette provides the same set of colours as the
system console, but in a different order. Previously we configured a
non-default VGA palette that had the same colours at the same indexes.
However, this caused anything drawn before the kernel started (drawn by
the loader, for instance) to change colours once the kernel configured
the new, non-default palette.
In 5e251aec86 we switched to leaving the default VGA palette in place,
translating console colour indexes to VGA colour indexes as necessary.
This translation was missed for the write mode 0 case for pixel blocks
with more than two colours.
PR: 261751
Reviewed by: adrian
MFC after: 1 week
Fixes: 5e251aec86 ("vt(4): Use default VGA palette")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34412
(cherry picked from commit f266082f11)
I suspect the variable names and comments were accidentally French.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 731a929ac9)
Remove redundant ofw property parsing in driver code, is already
taken care of in mmc_fdt_helpers.
Move ofw parsing to attach method.
Reviewed by: manu
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D31409
(cherry picked from commit 6ad816a999)
This patch adds compatible string for xenon controller found on
AP807 north brige. It is fully compatible with existing driver.
Reviewed by: manu
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D31407
(cherry picked from commit 1b9ce0885e)
This patch adds the necessary methods resolution to the sdhci_xenon
driver which are required to configure UHS modes for SD/MMC devices.
Apart from the two generic routines, the custom sdhci_xenon_set_uhs_timing
function is responsible for setting the SDHCI_HOST_CONTROL2 register
with appropriate mode select values - in case of HS200 and HS400
they are non-standard.
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Marvell
Differential Revision: https://reviews.freebsd.org/D30565
MFC after: 2 weeks
(cherry picked from commit 4fa977f854)
Improve the VCCQ voltage switch, so that to properly
handle the SDHCI_HOST_CONTROL2 register signaling
flags and along with manipulating the regulator.
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Marvell
Differential Revision: https://reviews.freebsd.org/D30564
MFC after: 2 weeks
(cherry picked from commit c80e2ca57e)
Until now the "no-1-8-v" DT flag wrongly disabled the SDHCI_CAN_VDD_180
- slot 1.8V power supply capability, whereas it refers to the signaling
voltage. Fix the sdhci_xenon_read_4 and allow to disable the UHS modes
depending on the DT property or PHY slow mode. While at it - make sure
the unsupported 1.2V signaling is always disabled and not reported
in the bootverbose log.
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Marvell
Differential Revision: https://reviews.freebsd.org/D30563
MFC after: 2 weeks
(cherry picked from commit df86876284)
The mmc_fdt_parse allows to parse more MMC-related
FDT properties. Start using it. "wp-inverted" property,
VQMMC and newly added VMMC power supply parsing
is now done in a generic code.
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Marvell
Differential Revision: https://reviews.freebsd.org/D30562
MFC after: 2 weeks
(cherry picked from commit 43e31350f8)
With this change the host controller drivers can set the MMC capabilities
(e.g. using mmc_fdt_parse() helper) before calling sdhci_init_slot().
This way the configuration dump (eg. in bootverbose) can include the
possible additional information.
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Marvell
Differential Revision: https://reviews.freebsd.org/D30561
MFC after: 2 weeks
(cherry picked from commit 5652be30a3)
It appears to have introduced a regression on arm64, possibly due to the
fact that the pcpu pointer is reloaded outside of the critical section
in _rm_rlock(). Until this is resolved one way or another, let's
revert.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Sponsored by: The FreeBSD Foundation
(cherry picked from commit afb44cb010)
NAT table mappings list only the source and destination IP, the source
and destinaion port numbers, and their mappings. But the protocol is not
listed. Now that Facebook and Google use QUIC, seeing port 443 in in a
list of active NAT sessions could mean 443/tcp or 443/udp. This patch
adds the protocol to the listing to aid in determining whether HTTPS is
TCP or QUIC in a NAT mapping listing. This also helps differentiatinete
between other protocols such as ICMP, ESP, and AH in ipnat list of active
sessions.
(cherry picked from commit 9291d079d5)
VLAN ID 0 is supposed to be interpreted as having no VLAN with a bit of
priority on the side, but the kernel is not able to decapsulate this on
the fly so dhclient needs to take care of it.
Reviewed by: markj
(cherry picked from commit abf5bff71d)
DBG2 ACPI table description [1] specifies three subtypes
related to 16550 UART:
0x0 - 16550 compatible
0x1 - 16550 subset
0x12 - 16550 compatible with parameters defined in Generic Address Structure (GAS)
It turned out however, that the Windows OS treats 0x0 subtype as
legacy x86 UART with 8-bit access. ARM SoCs can use types 0x1 (16550 with
fixed mmio32 access) or 0x12 (16550 with fully respected GAS contents).
Switch Marvell SoCs ACPI UART subtype to 0x1 - thanks to that the same firmware
can run properly with UART output in FreeBSD, Windows 10, Linux and ESXI
hypervisor. Tests showed the older firmware versions that use 0x0
UART subtype in SPCR table continue to display output properly.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table
Obtained from: Semihalf
Sponsored by: ARM
Differential revision: https://reviews.freebsd.org/D30386
MFC after: 2 weeks
(cherry picked from commit 9cf66a0458)
The recent addition of Synopsys ECAM quirk set the
device description only for the DT variant.
Do the same in ACPI case.
Reported by: jrtc27
(cherry picked from commit e8a8725360)
Due to the quirky nature of the Synopsys Designware PCIe IP,
the type 0 configuration is broadcast and whatever device
is plugged into slot, will appear at each 32 device
positions of bus0. Mitigate the issue by filtering out
duplicated devices on this bus for both DT and ACPI cases.
Reviewed by: mw
Sponsored by: Semihalf
MFC: after 3 weeks
Differential revision: https://reviews.freebsd.org/D31887
(cherry picked from commit 2de4c7f6d0)
HS200 and HS400 speeds can be enabled either with 1.2, or 1.8V signaling voltage.
Because of that we have four cabability flags: MMC_CAP_MMC_HS200_120,
MMC_CAP_MMC_HS200_180, MMC_CAP_MMC_HS400_120, MMC_CAP_MMC_HS400_180.
MMC logic only enables HS200/HS400 mode if both flags are set for the corresponding speed.
Fix that by being more permissive in host timing cap check.
Reviewed by: manu, mw
MFC after: 2 weeks
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D33130
(cherry picked from commit 8661e085fb)
Summary: Drop unsolicited BLS commands other than ABTS.
Reviewed by: mav
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34423
(cherry picked from commit 57e4b67755)
Summary:
Some targets are not responding to the FLOGI in point-to-point topology,
If the pt2pt discovery is done, Ignore the FLOGI failure.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34422
(cherry picked from commit 79c56c9af5)
zfskeys is about to be released for the first time with FreeBSD
13.1-RELEASE.
This is a direct commit.
Reviewed by: allanjude
Sponsored: Modirum
Sponsored: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34428
This enables thread-aware timers which in turn fixes benchmark result
reports.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D34238
(cherry picked from commit 6882d53b7f)
