cuts to the chase and fills in a provided s/g list. This is meant to optimize
out the cost of the callback since the callback doesn't serve much purpose for
mbufs since mbuf loads will never be deferred. This is just for amd64 and
i386 at the moment, other arches will be coming shortly.
Currently this is only used to initiailize the TPR to 0 during initial
setup.
- Reallocate vectors for the local APIC timer, error, and thermal LVT
entries. The timer entry is allocated from the top of the I/O interrupt
range reducing the number of vectors available for hardware interrupts
to 191. Linux happens to use the same exact vector for its timer
interrupt as well. If the timer vector shared the same priority queue
as the IPI handlers, then the frequency that the timer vector will
eventually be firing at can interact badly with the IPIs resulting in
the queue filling and the dreaded IPI stuck panics, hence it being located
at the top of the previous priority queue instead.
- Fixup various minor nits in comments.
as this may cause deadlocks.
This should fix kern/72123.
Discussed with: jhb
Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA
Izzet BESKARDES, Jens Binnewies, Karl Keusgen
Approved by: sam (mentor)
specified register, but a pointer to the in-memory representation of
that value. The reason for this is twofold:
1. Not all registers can be represented by a register_t. In particular
FP registers fall in that category. Passing the new register value
by reference instead of by value makes this point moot.
2. When we receive a G or P packet, both are for writing a register,
the packet will have the register value in target-byte order and
in the memory representation (modulo the fact that bytes are sent
as 2 printable hexadecimal numbers of course). We only need to
decode the packet to have a pointer to the register value.
This change fixes the bug of extracting the register value of the P
packet as a hexadecimal number instead of as a bit array. The quick
(and dirty) fix to bswap the register value in gdb_cpu_setreg() as
it has been added on i386 and amd64 can therefore be removed and has
in fact been that.
Tested on: alpha, amd64, i386, ia64, sparc64
of atomic_store_rel().
- Use the 80386 versions of atomic_load_acq() and atomic_store_rel() that
do not use serializing instructions on all UP kernels since a UP machine
does need to synchronize with other CPUs. This trims lots of cycles from
spin locks on UP kernels among other things.
Benchmarked by: rwatson
Expose some of the amd64-specific sysarch functions to allow alternative
implementations of the %fs/%gs code for TLS, threads, etc. USER_LDT does
not exist on the amd64 kernel, so we have to implement things other ways.
Restructure pmap_enter() to prevent the loss of a page modified (PG_M) bit
in a race between processors. (This restructuring assumes the newly atomic
pte_load_store() for correct operation.)
Reviewed by: tegge@
PR: i386/61852
pmap_copy(). This entails additional locking in pmap_copy() and the
addition of a "flags" parameter to the page table page allocator for
specifying whether it may sleep when memory is unavailable. (Already,
pmap_copy() checks the availability of memory, aborting if it is scarce.
In theory, another CPU could, however, allocate memory between
pmap_copy()'s check and the call to the page table page allocator,
causing the current thread to release its locks and sleep. This change
makes this scenario impossible.)
Reviewed by: tegge@
not sure yet about 5.x... MFC if needed.
Also fixes small problems with examining some registers and
some specific gdb transfer problems.
As the patch says:
This is not a pretty patch and only meant as a temporary
fix until a better solution is committed.
PR: i386/71715
Submitted by: Stephan Uphoff <ups@tree.com>
MFC after: 1 week
value was only enough for 8GB of RAM, the new value can do 16GB. This still
isn't optimal since it doesn't scale. Fixing this for amd64 looks to be
fairly easy, but for i386 will be quite difficult.
Reviewed by: peter
FULL_PREEMPTION is defined. Add a runtime warning to ULE if PREEMPTION is
enabled (code inspired by the PREEMPTION warning in kern_switch.c). This
is a possible MT5 candidate.
these two reasons:
1. On ia64 a function pointer does not hold the address of the first
instruction of a functions implementation. It holds the address
of a function descriptor. Hence the user(), btrap(), eintr() and
bintr() prototypes are wrong for getting the actual code address.
2. The logic forces interrupt, trap and exception entry points to
be layed-out contiguously. This can not be achieved on ia64 and is
generally just bad programming.
The MCOUNT_FROMPC_USER macro is used to set the frompc argument to
some kernel address which represents any frompc that falls outside
the kernel text range. The macro can expand to ~0U to bail out in
that case.
The MCOUNT_FROMPC_INTR macro is used to set the frompc argument to
some kernel address to represent a call to a trap or interrupt
handler. This to avoid that the trap or interrupt handler appear to
be called from everywhere in the call graph. The macro can expand
to ~0U to prevent adjusting frompc. Note that the argument is selfpc,
not frompc.
This commit defines the macros on all architectures equivalently to
the original code in sys/libkern/mcount.c. People can take it from
here...
Compile-tested on: alpha, amd64, i386, ia64 and sparc64
Boot-tested on: i386
The C code assumes that the carry bit is always kept from the previous
operation. However, the pointer indexing requires another add operation.
Thus, the carry bit from the first operation is tromped over by the
"addl" operation that ends up following it, so the "adcl" that follows
that has no effect because the carry bit is cleared before it.
The result is checksum failure on received packets.
The larger issue is that there isn't any other way of preventing the compiler
inserting arbitrary instructions between different __asm statements (and
that the commit message in revision 1.13 of in_cksum.h is wrong on
this point). From
http://developer.apple.com/documentation/DeveloperTools/gcc-3.3/gcc/Extended-Asm.html
---8<---8<---8<---
You can't expect a sequence of volatile asm instructions to remain
perfectly consecutive. If you want consecutive output, use a single
asm. Also, GCC will perform some optimizations across a volatile
asm instruction; GCC does not "forget everything" when it encounters
a volatile asm instruction the way some other compilers do.
---8<---8<---8<---
Also, this change also makes the ASM code much easier to read.
PR: 69257
Submitted by: Mike Bristow <mike@urgle.com>, Qing Li <qing.li@bluecoat.com>
logical CPUs on a system to be used as a dedicated watchdog to cause a
drop to the debugger and/or generate an NMI to the boot processor if
the kernel ceases to respond. A sysctl enables the watchdog running
out of the processor's idle thread; a callout is launched to reset a
timer in the watchdog. If the callout fails to reset the timer for ten
seconds, the watchdog will fire. The sysctl allows you to select which
CPU will run the watchdog.
A sample "debug.leak_schedlock" is included, which causes a sysctl to
spin holding sched_lock in order to trigger the watchdog. On my Xeons,
the watchdog is able to detect this failure mode and break into the
debugger, which cannot otherwise be done without an NMI button.
This option does not currently work with sched_ule due to ule's push
notion of scheduling, similar to machdep.hlt_logical_cpus failing to
work with that scheduler.
On face value, this might seem somewhat inefficient, but there are a
lot of dual-processor Xeons with HTT around, so using one as a watchdog
for testing is not as inefficient as one might fear.
being defined, define and use a new MD macro, cpu_spinwait(). It only
expands to something on i386 and amd64, so the compiled code should be
identical.
Name of the macro found by: jhb
Reviewed by: jhb
pic_eoi_source() into one call. This halves the number of spinlock operations
and indirect function calls in the normal case of handling a normal (ithread)
interrupt. Optimize the atpic and ioapic drivers to use inlines where
appropriate in supporting the intr_execute_handlers() change.
This knocks 900ns, or roughly 1350 cycles, off of the time spent servicing an
interrupt in the common case on my 1.5GHz P4 uniprocessor system. SMP systems
likely won't see as much of a gain due to the ioapic being more efficient than
the atpic. I'll investigate porting this to amd64 soon.
Reviewed by: jhb
their own directory and module, leaving the MD parts in the MD
area (the MD parts _are_ part of the modules). /dev/mem and /dev/io
are now loadable modules, thus taking us one step further towards
a kernel created entirely out of modules. Of course, there is nothing
preventing the kernel from having these statically compiled.
dereference curthread. It is called only from critical_{enter,exit}(),
which already dereferences curthread. This doesn't seem to affect SMP
performance in my benchmarks, but improves MySQL transaction throughput
by about 1% on UP on my Xeon.
Head nodding: jhb, bmilekic
Most of the changes are a direct result of adding thread awareness.
Typically, DDB_REGS is gone. All registers are taken from the
trapframe and backtraces use the PCB based contexts. DDB_REGS was
defined to be a trapframe on all platforms anyway.
Thread awareness introduces the following new commands:
thread X switch to thread X (where X is the TID),
show threads list all threads.
The backtrace code has been made more flexible so that one can
create backtraces for any thread by giving the thread ID as an
argument to trace.
With this change, ia64 has support for breakpoints.
o s/ddb_on_nmi/kdb_on_nmi/g
o Rename sysctl machdep.ddb_on_nmi to machdep.kdb_on_nmi
o Make debugging support conditional upon KDB instead of DDB.
o Call kdb_reenter() when kdb_active is non-zero.
o Call kdb_trap() to enter the debugger when not already active.
o Update comments accordingly.
o Remove misplaced prototype of kdb_trap().
a PCB from a trapframe for purposes of unwinding the stack. The PCB
is used as the thread context and all but the thread that entered the
debugger has a valid PCB.
This function can also be used to create a context for the threads
running on the CPUs that have been stopped when the debugger got
entered. This however is not done at the time of this commit.
in which multiple (presumably different) debugger backends can be
configured and which provides basic services to those backends.
Besides providing services to backends, it also serves as the single
point of contact for any and all code that wants to make use of the
debugger functions, such as entering the debugger or handling of the
alternate break sequence. For this purpose, the frontend has been
made non-optional.
All debugger requests are forwarded or handed over to the current
backend, if applicable. Selection of the current backend is done by
the debug.kdb.current sysctl. A list of configured backends can be
obtained with the debug.kdb.available sysctl. One can enter the
debugger by writing to the debug.kdb.enter sysctl.
backend improves over the old GDB support in the following ways:
o Unified implementation with minimal MD code.
o A simple interface for devices to register themselves as debug
ports, ala consoles.
o Compression by using run-length encoding.
o Implements GDB threading support.
than as one-off hacks in various other parts of the kernel:
- Add a function maybe_preempt() that is called from sched_add() to
determine if a thread about to be added to a run queue should be
preempted to directly. If it is not safe to preempt or if the new
thread does not have a high enough priority, then the function returns
false and sched_add() adds the thread to the run queue. If the thread
should be preempted to but the current thread is in a nested critical
section, then the flag TDF_OWEPREEMPT is set and the thread is added
to the run queue. Otherwise, mi_switch() is called immediately and the
thread is never added to the run queue since it is switch to directly.
When exiting an outermost critical section, if TDF_OWEPREEMPT is set,
then clear it and call mi_switch() to perform the deferred preemption.
- Remove explicit preemption from ithread_schedule() as calling
setrunqueue() now does all the correct work. This also removes the
do_switch argument from ithread_schedule().
- Do not use the manual preemption code in mtx_unlock if the architecture
supports native preemption.
- Don't call mi_switch() in a loop during shutdown to give ithreads a
chance to run if the architecture supports native preemption since
the ithreads will just preempt DELAY().
- Don't call mi_switch() from the page zeroing idle thread for
architectures that support native preemption as it is unnecessary.
- Native preemption is enabled on the same archs that supported ithread
preemption, namely alpha, i386, and amd64.
This change should largely be a NOP for the default case as committed
except that we will do fewer context switches in a few cases and will
avoid the run queues completely when preempting.
Approved by: scottl (with his re@ hat)
pv entries per 1GB of user virtual memory. (eg: if we had 1GB file was
mmaped into 30 processes, that would theoretically reduce the KVA demand by
30MB for pv entries. In reality though, we limit pv entries so we don't
have that many at once.)
We used to store the vm_page_t for the page table page. But we recently
had the pa of the ptp, or can calculate it fairly quickly. If we wanted
to avoid the shift/mask operation in pmap_pde(), we could recover the
pa but that means we have to store it for a while.
This does not measurably change performance.
Suggested by: alc
Tested by: alc
- Allow ioapic_set_{nmi,smi,extint}() to be called multiple times on the
same pin so long as the pin's mode is the same as the mode being
requested.
- Add a notion of bus type for the interrupt associated with interrupt pin.
This is needed so that we can force all EISA interrupts to be active high
in the forthcoming ioapic_config_intr().
- Fix a bug for EISA systems that didn't remap IRQs. This would have broken
EISA systems that tried to disable mixed mode for IRQ 0.
