a power saving mode otherwise.
- If the thread is already bound in sched_bind() unbind it before
re-binding it to a new cpu. I don't like these semantics but they are
expected by some code in the tree. Patch by jkoshy.
Dont expose em->shared to the outside world before its properly
initialized. Might not affect anything but its at least a better
coding style.
Dont expose em via p->p_emuldata until its properly initialized.
This also enables us to get rid of some locking and simplify the
code because we are workin on a local copy.
In linux_fork and linux_vfork create the process in stopped state
to be sure that the new process runs with fully initialized emuldata
structure [1]. Also fix the vfork (both in linux_clone and linux_vfork)
race that could result in never woken up process [2].
Reported by: Scot Hetzel [1]
Suggested by: jhb [2]
Reviewed by: jhb (at least some important parts)
Submitted by: rdivacky
Tested by: Scot Hetzel (on amd64)
Change 2 comments (in the new code) to comply to style(9).
Suggested by: jhb
work when we start requiring this.
- Don't specify an alignment when creating our own parent DMA tag;
the supported DMA engines require no alignment constraint (f.e. the
LANCE child does though) and it's no inherited by the child DMA
tags anyway (which probably is a bug though).
- Fix whitespace nits.
and add a list of known-working PCI devices.
- For consistency throughout this man page also talk about C-Bus and
ISA adapters rather than cards.
- Add missing .Tn.
- Mention ifconfig(8) along with listing selectable media types.
- Add/un-comment hardware notes for the newly supported 'lebuffer'
variants (the transition from P/N 501-1860 to 501-1869 isn't a typo).
These are shared-memory variants based on Am79C90-compatible chips
that apart from the missing DMA engine are similar to the 'ledma'
variant including using a (pseudo-)bus/device for the buffer that
the actual LANCE device hangs off from. The performance of these is
close to that of the 'ledma' one, like expected at a few times the
CPU load though.
1) Do not account for uids/gids that appear negative to prevent
the creation of 131GB+ quota files. This is the same as the kernel
now determines which files to provide quota accounting for.
Related to PR kern/38156. This should also prevent boots from
hanging if a negative uid appears in the file systems.
2) Do not count system files in the usage counts. These currently are
file system snapshot and quota data files. This is how the kernel
now handles those files.
3) Correctly generate new quota data files if the current files
do not exist or are zero length in size. PR kern/30958.
It should now be possible to newfs / mount / touch quota.{user,group}
and quotaon a file system and have everything work.
4) Change some diagnostics to report the file system and type of
id (uid or gid) that is being reported.
5) Truncate the quota data files if possible, instead of letting
them grow to a big enough size to hold the largest UID/GID on
the system (typically "nobody"). The kernel should now be able to
grow the files as needed without deadlocking the system.
PR: kern/30958, kern/38156
1) Do not do quota accounting for the actual quota data files
or for file system snapshot files ("system" files). This
prevents a deadlock descibed in PR kern/30958 if the kernel
ever has to grow the quota file. Snapshot files were already
exempt from the quota checks, but this change generalized the check.
2) Fix a cast that caused extremely large uids/gids to incorrectly
write the quota information to the data file at a truncated
value for a uint_t32 id value. The incorrect cast caused quota
files in this case to be around 4GB in size, with the correct cast
they can now be 131GB in size. Also related to PR kern/30958.
3) Check for what appear to be negative UIDs/GIDs and not account
for them. This prevents the quota files from becoming 131GB in
size and causing quotacheck to run forever at bootup. This could
also cause the kernel to try and expand the quota file, which might
deadlock due to the issue in #1. kern/30958 and kern/38156
(and some much older closed PR's).
4) With the deadlock problems gone, the kernel can now expand the
size of the quota database files if it needs to.
5) Pass in the i-node count change value to chkiq and chkiqchg as an
int, like it used to be before the common routine was split up
into 2 different routines to increase / decrease the i-node in-use
count. Prevents an underflow on the i-node count. Related
to PR kern/89247.
6) Prevent the block usage from growing slowly if a file system is
full and the write was denied due to that fact. PR kern/89247.
Some of these changes require an updated quotacheck to prevent
the creation of huge (131GB) quota data files (item #3).
#1/#4 probably fixes a lot of the random hangs when quotas are enabled,
possibly some of the jail hangs.
unlike documented may not take effect without an initialization. So
don't invoke (*sc_mediachange) directly in lance_mediachange() but
go through lance_init_locked(). It's suboptimal to impose this for
all chips but given that besides the affected PCI bus front-end the
only other front-end which supports media selection is and likely
ever will be the 'ledma' front-end I see not enough reason to break
the in-driver API for this (though one could argue both ways here).
the ipi settings. If NEEDRESCHED is set and an ipi is later delivered
it will clear it rather than cause extra context switches. However, if
we miss setting it we can have terrible latency.
- In sched_bind() correctly implement bind. Also be slightly more
tolerant of code which calls bind multiple times. However, we don't
change binding if another call is made with a different cpu. This
does not presently work with hwpmc which I believe should be changed.
front of isp_init so we can read NVRAM even if we're role ISP_NONE.
Prepare for reintroduction of channels (for FC) for N-Port
Virtualization.
Fix a botch in handle assignment that caused us to nuke one device
when a new one arrives and end up with two devices with the same
identity in the virtual target mapping table.
one. This is based on NetBSD but unlike NetBSD this implementation prints
the instance number for all media instances and doesn't skip it for the
first one as I don't see a reason to suppress it except for the vague
reason to preserve the output for single-instance configurations.
- Fix some whitespace nits.
ifmedia_init() invocation. IFM_IMASK makes only sense here when all of
the maxium of 32 PHYs on each one MII bus support disjoint sets of media,
which generally isn't the case (though it would be nice if we had a way
to let NIC drivers indicate that for the few card models where the PHY
configuration is known/fixed and IFM_IMASK actually makes sense).
- Add and use a miibus_print_child() for the bus_print_child method which
additionally prints the PHY number (which actually is the PHY address)
so one can figure out the media instance <-> PHY number mapping from the
PHY driver attach output. This is intented to be usefull in situations
where the addresses of the PHYs on the bus are known (f.e. of internal/
integrated PHYs) so one can feed the appropriate media instance number
to ifconfig(8) (with the upcoming change for ifconfig(8)).
This is more or less inspired by the NetBSD mii_print().
multiple PHYs. In case some PHYs currently driven by ukphy(4) exhibit
problems when isolating due to incomplete implementations or silicon bugs
we'll need to add specific drivers for these. Looking at NetBSD and
OpenBSD I don't expect problems here though (quite the contrary; we still
seem to set MIIF_NOISOLATE without good reason in a bunch of PHY drivers).
- Fix a style(9) whitespace nit.
capability rather than hardcoded offsets for a particular card. While
I'm here, expand the constants some.
- Change the ahd(4) driver to use pci_find_extcap() to locate the PCI-X
capability to keep up with the first change.
Reviewed by: scottl, gibbs (earlier version)
- Switch back to direct modification of remote CPU run queues. This added
a lot of complexity with questionable gain. It's easy enough to
reimplement if it's shown to help on huge machines.
- Re-implement the old tdq_transfer() call as tdq_pickidle(). Change
sched_add() so we have selectable cpu choosers and simplify the logic
a bit here.
- Implement tdq_pickpri() as the new default cpu chooser. This algorithm
is similar to Solaris in that it tries to always run the threads with
the best priorities. It is actually slightly more complex than
solaris's algorithm because we also tend to favor the local cpu over
other cpus which has a boost in latency but also potentially enables
cache sharing between the waking thread and the woken thread.
- Add a bunch of tunables that can be used to measure effects of different
load balancing strategies. Most of these will go away once the
algorithm is more definite.
- Add a new mechanism to steal threads from busy cpus when we idle. This
is enabled with kern.sched.steal_busy and kern.sched.busy_thresh. The
threshold is the required length of a tdq's run queue before another
cpu will be able to steal runnable threads. This prevents most queue
imbalances that contribute the long latencies.
headers in .S directly rather than getting to their macros through
genassym.c/assym.s so there are less headers genassym.c has to be
kept in sync with.
While at it fix some stytle(9) bugs (indentation, prototype format,
sort headers, etc) and remove trailing whitespace.
number being returned for mktime and timegm calls. Choose 48 because
that works well. This does reduce the dynamic range of tm_year from
about 2 billion years down to "only" about 9 million years. Please
contact me if this restriction poses a problem.
Due to the complexity of the code, I admit that I didn't trace down
what, exactly, was overflowing with longer bits. This fixes software
that we run on the embedded systems we have.
that can be used to check whether receive data is ready, i.e. whether
the subsequent call of uart_poll() should return a char, and unlike
uart_poll() doesn't actually receive data.
- Remove the device-specific implementations of uart_poll() and implement
uart_poll() in terms of uart_getc() and the newly added uart_rxready()
in order to minimize code duplication.
- In sunkbd(4) take advantage of uart_rxready() and use it to implement
the polled mode part of sunkbd_check() so we don't need to buffer a
potentially read char in the softc.
- Fix some mis-indentation in sunkbd_read_char().
Discussed with: marcel
may also reflect a Fireplane/Safari or JBus bus (or a virtual bus which
in turn reflects a JBus bus or something like that...).
- In the both the sparc64 and sun4v bus_machdep.c use __FBSDID.
- Spell SBus the official way in comments.
- Replace hardcoded function names (all of which were actually outdated)
in panic and status strings with __func__.
- Fix whitespace nits.
