1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-16 10:20:30 +00:00
Commit Graph

296 Commits

Author SHA1 Message Date
Robert Watson
5f51fb4871 Mark MAC Framework sx and rm locks as NOWITNESS to suppress warnings that
might arise from WITNESS not understanding its locking protocol, which
should be deadlock-free.  Currently these warnings generally don't occur,
but as object locking is pushed into policies for some object types, they
would otherwise occur more often.

Obtained from:	TrustedBSD Project
2009-06-02 22:22:09 +00:00
Robert Watson
f93bfb23dc Add internal 'mac_policy_count' counter to the MAC Framework, which is a
count of the number of registered policies.

Rather than unconditionally locking sockets before passing them into MAC,
lock them in the MAC entry points only if mac_policy_count is non-zero.

This avoids locking overhead for a number of socket system calls when no
policies are registered, eliminating measurable overhead for the MAC
Framework for the socket subsystem when there are no active policies.

Possibly socket locks should be acquired by policies if they are required
for socket labels, which would further avoid locking overhead when there
are policies but they don't require labeling of sockets, or possibly
don't even implement socket controls.

Obtained from:	TrustedBSD Project
2009-06-02 18:26:17 +00:00
Robert Watson
1a109c1cb0 Make the rmlock(9) interface a bit more like the rwlock(9) interface:
- Add rm_init_flags() and accept extended options only for that variation.
- Add a flags space specifically for rm_init_flags(), rather than borrowing
  the lock_init() flag space.
- Define flag RM_RECURSE to use instead of LO_RECURSABLE.
- Define flag RM_NOWITNESS to allow an rmlock to be exempt from WITNESS
  checking; this wasn't possible previously as rm_init() always passed
  LO_WITNESS when initializing an rmlock's struct lock.
- Add RM_SYSINIT_FLAGS().
- Rename embedded mutex in rmlocks to make it more obvious what it is.
- Update consumers.
- Update man page.
2009-05-29 10:52:37 +00:00
Robert Watson
81fee06f9c Convert the MAC Framework from using rwlocks to rmlocks to stabilize
framework registration for non-sleepable entry points.

Obtained from:	TrustedBSD Project
2009-05-27 09:41:58 +00:00
Robert Watson
fa76567150 Rename MAC Framework-internal macros used to invoke policy entry points:
MAC_BOOLEAN           -> MAC_POLICY_BOOLEAN
  MAC_BOOLEAN_NOSLEEP   -> MAC_POLICY_BOOLEANN_NOSLEEP
  MAC_CHECK             -> MAC_POLICY_CHECK
  MAC_CHECK_NOSLEEP     -> MAC_POLICY_CHECK_NOSLEEP
  MAC_EXTERNALIZE       -> MAC_POLICY_EXTERNALIZE
  MAC_GRANT             -> MAC_POLICY_GRANT
  MAC_GRANT_NOSLEEP     -> MAC_POLICY_GRANT_NOSLEEP
  MAC_INTERNALIZE       -> MAC_POLICY_INTERNALIZE
  MAC_PERFORM           -> MAC_POLICY_PERFORM_CHECK
  MAC_PERFORM_NOSLEEP   -> MAC_POLICY_PERFORM_NOSLEEP

This frees up those macro names for use in wrapping calls into the MAC
Framework from the remainder of the kernel.

Obtained from:	TrustedBSD Project
2009-05-01 21:05:40 +00:00
Robert Watson
4020272933 Rework MAC Framework synchronization in a number of ways in order to
improve performance:

- Eliminate custom reference count and condition variable to monitor
  threads entering the framework, as this had both significant overhead
  and behaved badly in the face of contention.

- Replace reference count with two locks: an rwlock and an sx lock,
  which will be read-acquired by threads entering the framework
  depending on whether a give policy entry point is permitted to sleep
  or not.

- Replace previous mutex locking of the reference count for exclusive
  access with write acquiring of both the policy list sx and rw locks,
  which occurs only when policies are attached or detached.

- Do a lockless read of the dynamic policy list head before acquiring
  any locks in order to reduce overhead when no dynamic policies are
  loaded; this a race we can afford to lose.

- For every policy entry point invocation, decide whether sleeping is
  permitted, and if not, use a _NOSLEEP() variant of the composition
  macros, which will use the rwlock instead of the sxlock.  In some
  cases, we decide which to use based on allocation flags passed to the
  MAC Framework entry point.

As with the move to rwlocks/rmlocks in pfil, this may trigger witness
warnings, but these should (generally) be false positives as all
acquisition of the locks is for read with two very narrow exceptions
for policy load/unload, and those code blocks should never acquire
other locks.

Sponsored by:	Google, Inc.
Obtained from:	TrustedBSD Project
Discussed with:	csjp (idea, not specific patch)
2009-03-14 16:06:06 +00:00
Robert Watson
fefd0ac8a9 Remove 'uio' argument from MAC Framework and MAC policy entry points for
extended attribute get/set; in the case of get an uninitialized user
buffer was passed before the EA was retrieved, making it of relatively
little use; the latter was simply unused by any policies.

Obtained from:	TrustedBSD Project
Sponsored by:	Google, Inc.
2009-03-08 12:32:06 +00:00
Robert Watson
c14172e3ae Rename 'ucred' argument to mac_socket_check_bind() to 'cred' to match
other use of the same variable type.

Obtained from:	TrustedBSD Project
Sponsored by:	Google, Inc.
2009-03-08 12:22:00 +00:00
Robert Watson
6f6174a762 Improve the consistency of MAC Framework and MAC policy entry point
naming by renaming certain "proc" entry points to "cred" entry points,
reflecting their manipulation of credentials.  For some entry points,
the process was passed into the framework but not into policies; in
these cases, stop passing in the process since we don't need it.

  mac_proc_check_setaudit -> mac_cred_check_setaudit
  mac_proc_check_setaudit_addr -> mac_cred_check_setaudit_addr
  mac_proc_check_setauid -> mac_cred_check_setauid
  mac_proc_check_setegid -> mac_cred_check_setegid
  mac_proc_check_seteuid -> mac_cred_check_seteuid
  mac_proc_check_setgid -> mac_cred_check_setgid
  mac_proc_check_setgroups -> mac_cred_ceck_setgroups
  mac_proc_check_setregid -> mac_cred_check_setregid
  mac_proc_check_setresgid -> mac_cred_check_setresgid
  mac_proc_check_setresuid -> mac_cred_check_setresuid
  mac_proc_check_setreuid -> mac_cred_check_setreuid
  mac_proc_check_setuid -> mac_cred_check_setuid

Obtained from:	TrustedBSD Project
Sponsored by:	Google, Inc.
2009-03-08 10:58:37 +00:00
Robert Watson
2087a58ca2 Add static DTrace probes for MAC Framework access control checks and
privilege grants so that dtrace can be more easily used to monitor
the security decisions being generated by the MAC Framework following
policy invocation.

Successful access control checks will be reported by:

  mac_framework:kernel:<entrypoint>:mac_check_ok

Failed access control checks will be reported by:

  mac_framework:kernel:<entrypoint>:mac_check_err

Successful privilege grants will be reported by:

  mac_framework:kernel:priv_grant:mac_grant_ok

Failed privilege grants will be reported by:

  mac_framework:kernel:priv_grant:mac_grant_err

In all cases, the return value (always 0 for _ok, otherwise an errno
for _err) will be reported via arg0 on the probe, and subsequent
arguments will hold entrypoint-specific data, in a style similar to
privilege tracing.

Obtained from:	TrustedBSD Project
Sponsored by:	Google, Inc.
2009-03-08 00:50:37 +00:00
Robert Watson
73e416e35d Reduce the verbosity of SDT trace points for DTrace by defining several
wrapper macros that allow trace points and arguments to be declared
using a single macro rather than several.  This means a lot less
repetition and vertical space for each trace point.

Use these macros when defining privilege and MAC Framework trace points.

Reviewed by:	jb
MFC after:	1 week
2009-03-03 17:15:05 +00:00
Konstantin Belousov
ad062f5bb8 Use vm_map_entry_t instead of explicit struct vm_map_entry *.
Reviewed by:	alc
2009-02-24 20:27:48 +00:00
Robert Watson
c7ed8c0a85 Use __FBSDID() for $FreeBSD$ version strings in .c files.
Obtained from:	TrustedBSD Project
MFC after:	3 days
2009-01-24 13:15:45 +00:00
Robert Watson
91ec000612 Begin to add SDT tracing of the MAC Framework: add policy modevent,
register, and unregister hooks that give access to the mac_policy_conf
for the policy.

Obtained from:	TrustedBSD Project
MFC after:	3 days
2009-01-24 10:57:32 +00:00
Robert Watson
9162f64b58 Rather than having MAC policies explicitly declare what object types
they label, derive that information implicitly from the set of label
initializers in their policy operations set.  This avoids a possible
class of programmer errors, while retaining the structure that
allows us to avoid allocating labels for objects that don't need
them.  As before, we regenerate a global mask of labeled objects
each time a policy is loaded or unloaded, stored in mac_labeled.

Discussed with:   csjp
Suggested by:     Jacques Vidrine <nectar at apple.com>
Obtained from:    TrustedBSD Project
Sponsored by:     Apple, Inc.
2009-01-10 10:58:41 +00:00
Robert Watson
dbdcb99498 Use MPC_OBJECT_IP6Q to indicate labeling of struct ip6q rather than
MPC_OBJECT_IPQ; it was already defined, just not used.

Obtained from:	TrustedBSD Project
Sponsored by:	Apple, Inc.
2009-01-10 09:17:16 +00:00
Alan Cox
1361cdc644 Make preparations for resurrecting shared/read locks on vm maps:
mac_proc_vm_revoke_recurse() requests a read lock on the vm map at the start
but does not handle failure by vm_map_lock_upgrade() when it seeks to modify
the vm map.  At present, this works because all lock request on a vm map are
implemented as exclusive locks.  Thus, vm_map_lock_upgrade() is a no-op that
always reports success.  However, that is about to change, and
proc_vm_revoke_recurse() will require substantial modifications to handle
vm_map_lock_upgrade() failures.  For the time being, I am changing
mac_proc_vm_revoke_recurse() to request a write lock on the vm map at the
start.

Approved by:	rwatson
MFC after:	3 months
2008-12-22 17:32:52 +00:00
Robert Watson
564f8f0fee Break out strictly credential-related portions of mac_process.c into a
new file, mac_cred.c.

Obtained from:	TrustedBSD Project
2008-10-28 21:53:10 +00:00
Edward Tomasz Napierala
15bc6b2bd8 Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary
to add more V* constants, and the variables changed by this patch were often
being assigned to mode_t variables, which is 16 bit.

Approved by:	rwatson (mentor)
2008-10-28 13:44:11 +00:00
Robert Watson
9215889d21 Rename mac_cred_mmapped_drop_perms(), which revokes access to virtual
memory mappings when the MAC label on a process changes, to
mac_proc_vm_revoke(),

It now also acquires its own credential reference directly from the
affected process rather than accepting one passed by the the caller,
simplifying the API and consumer code.

Obtained from:	TrustedBSD Project
2008-10-28 12:49:07 +00:00
Robert Watson
212ab0cfb3 Rename three MAC entry points from _proc_ to _cred_ to reflect the fact
that they operate directly on credentials: mac_proc_create_swapper(),
mac_proc_create_init(), and mac_proc_associate_nfsd().  Update policies.

Obtained from:	TrustedBSD Project
2008-10-28 11:33:06 +00:00
Robert Watson
4b908c8bb4 Add a MAC label, MAC Framework, and MAC policy entry points for IPv6
fragment reassembly queues.

This allows policies to label reassembly queues, perform access
control checks when matching fragments to a queue, update a queue
label when fragments are matched, and label the resulting
reassembled datagram.

Obtained from:	TrustedBSD Project
2008-10-26 22:45:18 +00:00
Bjoern A. Zeeb
37ee72936b Add mac_inpcb_check_visible MAC Framework entry point, which is similar
to mac_socket_check_visible but operates on the inpcb.

Reviewed by:	rwatson
MFC after:	3 months (set timer, decide then)
2008-10-17 12:54:28 +00:00
Robert Watson
6356dba0b4 Introduce two related changes to the TrustedBSD MAC Framework:
(1) Abstract interpreter vnode labeling in execve(2) and mac_execve(2)
    so that the general exec code isn't aware of the details of
    allocating, copying, and freeing labels, rather, simply passes in
    a void pointer to start and stop functions that will be used by
    the framework.  This change will be MFC'd.

(2) Introduce a new flags field to the MAC_POLICY_SET(9) interface
    allowing policies to declare which types of objects require label
    allocation, initialization, and destruction, and define a set of
    flags covering various supported object types (MPC_OBJECT_PROC,
    MPC_OBJECT_VNODE, MPC_OBJECT_INPCB, ...).  This change reduces the
    overhead of compiling the MAC Framework into the kernel if policies
    aren't loaded, or if policies require labels on only a small number
    or even no object types.  Each time a policy is loaded or unloaded,
    we recalculate a mask of labeled object types across all policies
    present in the system.  Eliminate MAC_ALWAYS_LABEL_MBUF option as it
    is no longer required.

MFC after:	1 week ((1) only)
Reviewed by:	csjp
Obtained from:	TrustedBSD Project
Sponsored by:	Apple, Inc.
2008-08-23 15:26:36 +00:00
John Baldwin
6bc1e9cd84 Rework the lifetime management of the kernel implementation of POSIX
semaphores.  Specifically, semaphores are now represented as new file
descriptor type that is set to close on exec.  This removes the need for
all of the manual process reference counting (and fork, exec, and exit
event handlers) as the normal file descriptor operations handle all of
that for us nicely.  It is also suggested as one possible implementation
in the spec and at least one other OS (OS X) uses this approach.

Some bugs that were fixed as a result include:
- References to a named semaphore whose name is removed still work after
  the sem_unlink() operation.  Prior to this patch, if a semaphore's name
  was removed, valid handles from sem_open() would get EINVAL errors from
  sem_getvalue(), sem_post(), etc.  This fixes that.
- Unnamed semaphores created with sem_init() were not cleaned up when a
  process exited or exec'd.  They were only cleaned up if the process
  did an explicit sem_destroy().  This could result in a leak of semaphore
  objects that could never be cleaned up.
- On the other hand, if another process guessed the id (kernel pointer to
  'struct ksem' of an unnamed semaphore (created via sem_init)) and had
  write access to the semaphore based on UID/GID checks, then that other
  process could manipulate the semaphore via sem_destroy(), sem_post(),
  sem_wait(), etc.
- As part of the permission check (UID/GID), the umask of the proces
  creating the semaphore was not honored.  Thus if your umask denied group
  read/write access but the explicit mode in the sem_init() call allowed
  it, the semaphore would be readable/writable by other users in the
  same group, for example.  This includes access via the previous bug.
- If the module refused to unload because there were active semaphores,
  then it might have deregistered one or more of the semaphore system
  calls before it noticed that there was a problem.  I'm not sure if
  this actually happened as the order that modules are discovered by the
  kernel linker depends on how the actual .ko file is linked.  One can
  make the order deterministic by using a single module with a mod_event
  handler that explicitly registers syscalls (and deregisters during
  unload after any checks).  This also fixes a race where even if the
  sem_module unloaded first it would have destroyed locks that the
  syscalls might be trying to access if they are still executing when
  they are unloaded.

  XXX: By the way, deregistering system calls doesn't do any blocking
  to drain any threads from the calls.
- Some minor fixes to errno values on error.  For example, sem_init()
  isn't documented to return ENFILE or EMFILE if we run out of semaphores
  the way that sem_open() can.  Instead, it should return ENOSPC in that
  case.

Other changes:
- Kernel semaphores now use a hash table to manage the namespace of
  named semaphores nearly in a similar fashion to the POSIX shared memory
  object file descriptors.  Kernel semaphores can now also have names
  longer than 14 chars (up to MAXPATHLEN) and can include subdirectories
  in their pathname.
- The UID/GID permission checks for access to a named semaphore are now
  done via vaccess() rather than a home-rolled set of checks.
- Now that kernel semaphores have an associated file object, the various
  MAC checks for POSIX semaphores accept both a file credential and an
  active credential.  There is also a new posixsem_check_stat() since it
  is possible to fstat() a semaphore file descriptor.
- A small set of regression tests (using the ksem API directly) is present
  in src/tools/regression/posixsem.

Reported by:	kris (1)
Tested by:	kris
Reviewed by:	rwatson (lightly)
MFC after:	1 month
2008-06-27 05:39:04 +00:00
John Baldwin
c4f3a35a54 Remove the posixsem_check_destroy() MAC check. It is semantically identical
to doing a MAC check for close(), but no other types of close() (including
close(2) and ksem_close(2)) have MAC checks.

Discussed with:	rwatson
2008-06-23 21:37:53 +00:00
Robert Watson
37f44cb428 The TrustedBSD MAC Framework named struct ipq instances 'ipq', which is the
same as the global variable defined in ip_input.c.  Instead, adopt the name
'q' as found in about 1/2 of uses in ip_input.c, preventing a collision on
the name.  This is non-harmful, but means that search and replace on the
global works less well (as in the virtualization work), as well as indexing
tools.

MFC after:	1 week
Reported by:	julian
2008-06-13 22:14:15 +00:00
Christian S.J. Peron
1f84ab0f2a Plug a memory leak which can occur when multiple MAC policies are loaded
which label mbufs.  This leak can occur if one policy successfully allocates
label storage and subsequent allocations from other policies fail.

Spotted by:	rwatson
MFC after:	1 week
2008-05-27 14:18:02 +00:00
Robert Watson
211b72ad2f When propagating a MAC label from an inpcb to an mbuf, allow read and
write locks on the inpcb, not just write locks.

MFC after:	3 months
2008-04-19 18:35:27 +00:00
Robert Watson
8501a69cc9 Convert pcbinfo and inpcb mutexes to rwlocks, and modify macros to
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.

This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.

MFC after:	3 months
Tested by:	kris (superset of committered patch)
2008-04-17 21:38:18 +00:00
Robert Watson
646a9f8029 Make naming of include guards for MAC Framework include files more
consistent with other kernel include guards (don't start with _SYS).

MFC after:	3 days
2008-04-13 21:45:52 +00:00
Konstantin Belousov
57b4252e45 Add the support for the AT_FDCWD and fd-relative name lookups to the
namei(9).

Based on the submission by rdivacky,
	sponsored by Google Summer of Code 2007
Reviewed by:	rwatson, rdivacky
Tested by:	pho
2008-03-31 12:01:21 +00:00
Attilio Rao
22db15c06f VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.

KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.

Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
Attilio Rao
cb05b60a89 vn_lock() is currently only used with the 'curthread' passed as argument.
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.

Manpage and FreeBSD_version will be updated through further commits.

As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.

Tested by:	Diego Sardina <siarodx at gmail dot com>,
		Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
John Baldwin
8e38aeff17 Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
  object which provides the backing store.  Each descriptor starts off with
  a size of zero, but the size can be altered via ftruncate(2).  The shared
  memory file descriptors also support fstat(2).  read(2), write(2),
  ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
  memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
  manage shared memory file descriptors.  The virtual namespace that maps
  pathnames to shared memory file descriptors is implemented as a hash
  table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
  of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
  path argument to shm_open(2).  In this case, an unnamed shared memory
  file descriptor will be created similar to the IPC_PRIVATE key for
  shmget(2).  Note that the shared memory object can still be shared among
  processes by sharing the file descriptor via fork(2) or sendmsg(2), but
  it is unnamed.  This effectively serves to implement the getmemfd() idea
  bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
  collected when they are not referenced by any open file descriptors or
  the shm_open(2) virtual namespace.

Submitted by:	dillon, peter (previous versions)
Submitted by:	rwatson (I based this on his version)
Reviewed by:	alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
Robert Watson
b5f992b93d Fix a MAC label leak for POSIX semaphores, in which per-policy labels
would be properly disposed of, but the global label structure for the
semaphore wouldn't be freed.

MFC after:	3 days
Reported by:	tanyong <tanyong at ercist dot iscas dot ac dot cn>,
		zhouzhouyi
2007-12-17 17:26:32 +00:00
Robert Watson
2a9e17ce8e Garbage collect mac_mbuf_create_multicast_encap TrustedBSD MAC Framework
entry point, which is no longer required now that we don't support
old-style multicast tunnels.  This removes the last mbuf object class
entry point that isn't init/copy/destroy.

Obtained from:	TrustedBSD Project
2007-10-28 17:55:57 +00:00
Robert Watson
a13e21f7bc Continue to move from generic network entry points in the TrustedBSD MAC
Framework by moving from mac_mbuf_create_netlayer() to more specific
entry points for specific network services:

- mac_netinet_firewall_reply() to be used when replying to in-bound TCP
  segments in pf and ipfw (etc).

- Rename mac_netinet_icmp_reply() to mac_netinet_icmp_replyinplace() and
  add mac_netinet_icmp_reply(), reflecting that in some cases we overwrite
  a label in place, but in others we apply the label to a new mbuf.

Obtained from:	TrustedBSD Project
2007-10-28 17:12:48 +00:00
Robert Watson
b9b0dac33b Move towards more explicit support for various network protocol stacks
in the TrustedBSD MAC Framework:

- Add mac_atalk.c and add explicit entry point mac_netatalk_aarp_send()
  for AARP packet labeling, rather than using a generic link layer
  entry point.

- Add mac_inet6.c and add explicit entry point mac_netinet6_nd6_send()
  for ND6 packet labeling, rather than using a generic link layer entry
  point.

- Add expliict entry point mac_netinet_arp_send() for ARP packet
  labeling, and mac_netinet_igmp_send() for IGMP packet labeling,
  rather than using a generic link layer entry point.

- Remove previous genering link layer entry point,
  mac_mbuf_create_linklayer() as it is no longer used.

- Add implementations of new entry points to various policies, largely
  by replicating the existing link layer entry point for them; remove
  old link layer entry point implementation.

- Make MAC_IFNET_LOCK(), MAC_IFNET_UNLOCK(), and mac_ifnet_mtx global
  to the MAC Framework rather than static to mac_net.c as it is now
  needed outside of mac_net.c.

Obtained from:	TrustedBSD Project
2007-10-28 15:55:23 +00:00
Robert Watson
6683b28d78 Update comment following MAC Framework entry point renaming and
reorganization.

Obtained from:	TrustedBSD Project
2007-10-26 21:16:34 +00:00
Robert Watson
8640764682 Rename 'mac_mbuf_create_from_firewall' to 'mac_netinet_firewall_send' as
we move towards netinet as a pseudo-object for the MAC Framework.

Rename 'mac_create_mbuf_linklayer' to 'mac_mbuf_create_linklayer' to
reflect general object-first ordering preference.

Sponsored by:	SPARTA (original patches against Mac OS X)
Obtained from:	TrustedBSD Project, Apple Computer
2007-10-26 13:18:38 +00:00
Robert Watson
179da74eb8 Sort entry points in mac_framework.h and mac_policy.h alphabetically by
primary object type, and then by secondarily by method name.  This sorts
entry points relating to particular objects, such as pipes, sockets, and
vnodes together.

Sponsored by:	SPARTA (original patches against Mac OS X)
Obtained from:	TrustedBSD Project, Apple Computer
2007-10-25 22:45:25 +00:00
Robert Watson
02be6269c3 Normalize TCP syncache-related MAC Framework entry points to match most
other entry points in the form mac_<object>_method().

Discussed with:	csjp
Obtained from:	TrustedBSD Project
2007-10-25 14:37:37 +00:00
Robert Watson
eb2cd5e1df Rename mac_associate_nfsd_label() to mac_proc_associate_nfsd(), and move
from mac_vfs.c to mac_process.c to join other functions that setup up
process labels for specific purposes.  Unlike the two proc create calls,
this call is intended to run after creation when a process registers as
the NFS daemon, so remains an _associate_ call..

Obtained from:	TrustedBSD Project
2007-10-25 12:34:14 +00:00
Robert Watson
a7f3aac7cb Further MAC Framework cleanup: normalize some local variable names and
clean up some comments.

Obtained from:	TrustedBSD Project
2007-10-25 07:49:47 +00:00
Robert Watson
30d239bc4c Merge first in a series of TrustedBSD MAC Framework KPI changes
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:

  mac_<object>_<method/action>
  mac_<object>_check_<method/action>

The previous naming scheme was inconsistent and mostly
reversed from the new scheme.  Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier.  Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods.  Also simplify, slightly,
some entry point names.

All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.

Sponsored by:	SPARTA (original patches against Mac OS X)
Obtained from:	TrustedBSD Project, Apple Computer
2007-10-24 19:04:04 +00:00
Robert Watson
1cb99cfc25 Bump MAC_VERSION to 4 and add an 8.x line in the version table. Version 4
will include significant synchronization to the Mac OS X Leopard version
of the MAC Framework.

Obtained from:	TrustedBSD Project
2007-10-23 14:12:16 +00:00
Robert Watson
fe09513e7d Canonicalize naming of local variables for struct ksem and associated
labels to 'ks' and 'kslabel' to reflect the convention in posix_sem.c.

MFC after:	3 days
Obtained from:	TrustedBSD Project
2007-10-21 11:11:07 +00:00
Robert Watson
45e0f3d63d Rename mac_check_vnode_delete() MAC Framework and MAC Policy entry
point to mac_check_vnode_unlink(), reflecting UNIX naming conventions.

This is the first of several commits to synchronize the MAC Framework
in FreeBSD 7.0 with the MAC Framework as it will appear in Mac OS X
Leopard.

Reveiwed by:    csjp, Samy Bahra <sbahra at gwu dot edu>
Submitted by:   Jacques Vidrine <nectar at apple dot com>
Obtained from:  Apple Computer, Inc.
Sponsored by:   SPARTA, SPAWAR
Approved by:    re (bmah)
2007-09-10 00:00:18 +00:00
Robert Watson
0bf686c125 Remove the now-unused NET_{LOCK,UNLOCK,ASSERT}_GIANT() macros, which
previously conditionally acquired Giant based on debug.mpsafenet.  As that
has now been removed, they are no longer required.  Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.

While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option.  Clean up some related gotos for
consistency.

Reviewed by:	bz, csjp
Tested by:	kris
Approved by:	re (kensmith)
2007-08-06 14:26:03 +00:00