run when asked for by the user. Right now, hv_kvpd is run on every boot.
Don't do that.
Add hv_kvpd_enable= for this script to be run.
MFC with 271493
MFC after: 2 weeks
Relnotes: yes
commit 8bd88585ed8e3f7def0d780a1bc30d96fe642b9c
Rework atse_rx_cycles handling: count packets instead of fills, and use the
limit only when polling, not when in interrupt mode. Otherwise, we may
stop reading the FIFO midpacket and clear the event mask even though the
FIFO still has data to read, which could stall receive when a large packet
arrives. Add a comment about races in the Altera FIFO interface: we may
need to do a little more work to handle races than we are.
commit 20b39086cc612f8874dc9e6ef4c0c2eb777ba92a
Use 'sizeof(data)' rather than '4' when checking an mbuf bound, as is the
case for adjusting length/etc.
commit e18953174a265f40e9ba60d76af7d288927f5382
Break out atse_intr() into two separate routines, one for each of the two
interrupt sources: receive and transmit.
commit 6deedb43246ab3f9f597918361831fbab7fac4ce
For the RX interrupt, take interest only in ALMOSTEMPTY and OVERFLOW.
For the TX interrupt, take interest only in ALMOSTFULL and UNDERFLOW.
Perform TX atse_start_locked() once rather than twice in TX interrupt
handling -- and only if !FULL, rather than unconditionally.
commit 12601972ba08d4380201a74f5b967bdaeb23092c
Experimentation suggests that the Altera Triple-Speed Ethernet documentation
is incorrect and bits in the event and interrupt-enable registers are not
irrationally rearranged relative to the status register.
commit 3cff2ffad769289fce3a728152e7be09405385d8
Substantially rework interrupt handling in the atse(4) driver:
- Introduce a new macro ATSE_TX_PENDING() which checks whether there is
any pending data to transmit, either in an in-progress packet or in
the TX queue.
- Introduce new ATSE_RX_STATUS_READ() and ATSE_TX_STAUTS_WRITE() macros
that query the FIFO status registers rather than event registers,
offering level- rather than edge-triggered FIFO conditions.
- For RX, interrupt only on full/overflow/underflow; for TX, interrupt
only on empty/overflow/underflow.
- Add new ATSE_RX_INTR_READ() and ATSE_RX_INTR_WRITE() macros useful for
debugging interrupt behaviour.
- Add a debug.atse_intr_debug_enable sysctl that causes various pieces
of FIFO state to be printed out on each RX or TX interrupt. This is
disabled by default but good to turn on if the interface appears to
wedge. Also print debugging information when polling.
- In the watchdog handler, do receive, not just transmit, processing, to
ensure that the rx, not just tx, queue is being handled -- and, in
particular, will be drained such that interrupts can resume.
- Rework both atse_rx_intr() and atse_tx_intr() to eliminate many race
conditions, and add comments on why various things are in various
orders. Interactions between modifications to the event and interrupt
masks are quite subtle indeed, and we must actively check for a number
of races (e.g., event mask cleared; packet arrives; interrupts enabled).
We also now use the status registers rather than event registers for
FIFO status checks to avoid other races; we continue to use event
registers for underflow/overflow.
With this change, interrupt-driven operation of atse appears (for the
time being) robust.
commit 3393bbff5c68a4e61699f9b4a62af5d2a5f918f8
atse: Fix build after 3cff2ffa
Obtained from: cheribsd
Submitted by: rwatson, emaste
Sponsored by: DARPA/AFRL
MFC after: 3 days
fibs. Use the mbuf's or the socket's fib instead of RT_ALL_FIBS. Fixes PR
187553. Also fixes netperf's UDP_STREAM test on a nondefault fib.
sys/netinet/ip_output.c
In ip_output, lookup the source address using the mbuf's fib instead
of RT_ALL_FIBS.
sys/netinet/in_pcb.c
in in_pcbladdr, lookup the source address using the socket's fib,
because we don't seem to have the mbuf fib. They should be the same,
though.
tests/sys/net/fibs_test.sh
Clear the expected failure on udp_dontroute.
PR: 187553
CR: https://reviews.freebsd.org/D772
MFC after: 3 weeks
Sponsored by: Spectra Logic
This fixes a bug which resulted in a warning on the userland
stack, when compiled on Windows.
Thanks to Peter Kasting from Google for reporting the issue and
provinding a potential fix.
MFC after: 3 days
towards blind SYN/RST spoofed attack.
Originally our stack used in-window checks for incoming SYN/RST
as proposed by RFC793. Later, circa 2003 the RST attack was
mitigated using the technique described in P. Watson
"Slipping in the window" paper [1].
After that, the checks were only relaxed for the sake of
compatibility with some buggy TCP stacks. First, r192912
introduced the vulnerability, just fixed by aforementioned SA.
Second, r167310 had slightly relaxed the default RST checks,
instead of utilizing net.inet.tcp.insecure_rst sysctl.
In 2010 a new technique for mitigation of these attacks was
proposed in RFC5961 [2]. The idea is to send a "challenge ACK"
packet to the peer, to verify that packet arrived isn't spoofed.
If peer receives challenge ACK it should regenerate its RST or
SYN with correct sequence number. This should not only protect
against attacks, but also improve communication with broken
stacks, so authors of reverted r167310 and r192912 won't be
disappointed.
[1] http://bandwidthco.com/whitepapers/netforensics/tcpip/TCP Reset Attacks.pdf
[2] http://www.rfc-editor.org/rfc/rfc5961.txt
Changes made:
o Revert r167310.
o Implement "challenge ACK" protection as specificed in RFC5961
against RST attack. On by default.
- Carefully preserve r138098, which handles empty window edge
case, not described by the RFC.
- Update net.inet.tcp.insecure_rst description.
o Implement "challenge ACK" protection as specificed in RFC5961
against SYN attack. On by default.
- Provide net.inet.tcp.insecure_syn sysctl, to turn off
RFC5961 protection.
The changes were tested at Netflix. The tested box didn't show
any anomalies compared to control box, except slightly increased
number of TCP connection in LAST_ACK state.
Reviewed by: rrs
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
in order to improve user-friendliness when a system has multiple disks
encrypted using the same passphrase.
When examining a new GELI provider, the most recently used passphrase
will be attempted before prompting for a passphrase; and whenever a
passphrase is entered, it is cached for later reference. When the root
disk is mounted, the cached passphrase is zeroed (triggered by the
"mountroot" event), in order to minimize the possibility of leakage
of passphrases. (After root is mounted, the "taste and prompt for
passphrases on the console" code path is disabled, so there is no
potential for a passphrase to be stored after the zeroing takes place.)
This behaviour can be disabled by setting kern.geom.eli.boot_passcache=0.
Reviewed by: pjd, dteske, allanjude
MFC after: 7 days
POSIX compliance and to improve compatibility with Linux and NetBSD
The issue was identified with lib/libc/sys/t_access:access_inval from
NetBSD
Update the manpage accordingly
PR: 181155
Reviewed by: jilles (code), jmmv (code), wblock (manpage), wollman (code)
MFC after: 4 weeks
Phabric: D678 (code), D786 (manpage)
Sponsored by: EMC / Isilon Storage Division
. Hook e_lgammal[_r].c to the build.
. Create man page links for lgammal[-r].3.
* Symbol.map:
. Sort lgammal to its rightful place.
. Add FBSD_1.4 section for the new lgamal_r symbol.
* ld128/e_lgammal_r.c:
. 128-bit implementataion of lgammal_r().
* ld80/e_lgammal_r.c:
. Intel 80-bit format implementation of lgammal_r().
* src/e_lgamma.c:
. Expose lgammal as a weak reference to lgamma for platforms
where long double is mapped to double.
* src/e_lgamma_r.c:
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
. Expose lgammal_r as a weak reference to lgamma_r for platforms
where long double is mapped to double.
* src/e_lgammaf_r.c:
. Fixed the Cygnus Support conversion of e_lgamma_r.c to float.
This includes the generation of new polynomial and rational
approximations with fewer terms. For each approximation, include
a comment on an estimate of the accuracy over the relevant domain.
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
This allows the removal of several explicit casts of double values
to float.
* src/e_lgammal.c:
. Wrapper for lgammal() about lgammal_r().
* src/imprecise.c:
. Remove the lgamma.
* src/math.h:
. Add a prototype for lgammal_r().
* man/lgamma.3:
. Document the new functions.
Reviewed by: bde
The flowdirector feature shares on-chip memory with other things
such as the RX buffers. In theory it should be configured in a way
that doesn't interfere with the rest of operation. In practice,
the RX buffer calculation didn't take the flow-director allocation
into account and there'd be overlap. This lead to various garbage
frames being received containing what looks like internal NIC state.
What _I_ saw was traffic ending up in the wrong RX queues.
If I was doing a UDP traffic test with only one NIC ring receiving
traffic, everything is fine. If I fired up a second UDP stream
which came in on another ring, there'd be a few percent of traffic
from both rings ending up in the wrong ring. Ie, the RSS hash would
indicate it was supposed to come in ring X, but it'd come in ring Y.
However, when the allocation was fixed up, the developers at Verisign
still saw traffic stalls.
The flowdirector feature ends up fiddling with the NIC to do various
attempts at load balancing connections by populating flow table rules
based on sampled traffic. It's likely that all of that has to be
carefully reviewed and made less "magic".
So for now the flow director feature is disabled (which fixes both
what I was seeing and what they were seeing) until it's all much
more debugged and verified.
Tested:
* (me) 82599EB 2x10G NIC, RSS UDP testing.
* (verisign) not sure on the NIC (but likely 82599), 100k-200k/sec TCP
transaction tests.
Submitted by: Marc De La Gueronniere <mdelagueronniere@verisign.com>
MFC after: 1 week
Sponsored by: Verisign, Inc.
fmp->buf at the free point is already part of the chain being freed,
so double-freeing is counter-productive.
Submitted by: Marc De La Gueronniere <mdelagueronniere@verisign.com>
MFC after: 1 week
Sponsored by: Verisign, Inc.
This allows the NIC to drop frames on the receive queue and not
cause the MAC to block on receiving to _any_ queue.
Tested:
igb0@pci0:5:0:0: class=0x020000 card=0x152115d9 chip=0x15218086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'I350 Gigabit Network Connection'
class = network
subclass = ethernet
Discussed with: Eric Joyner <eric.joyner@intel.com>
MFC after: 1 week
Sponsored by: Norse Corp, Inc.
- Fail with EINVAL if an invalid protection mask is passed to mmap().
- Fail with EINVAL if an unknown flag is passed to mmap().
- Fail with EINVAL if both MAP_PRIVATE and MAP_SHARED are passed to mmap().
- Require one of either MAP_PRIVATE or MAP_SHARED for non-anonymous
mappings.
Reviewed by: alc, kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D698
Eliminate an exclusive object lock acquisition and release on the expected
execution path.
Do page zeroing before the object lock is acquired rather than during the
time that the object lock is held.
Use vm_pager_free_nonreq() to eliminate duplicated code.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
The suspend/resume of event channels is already handled by the xen_intr_pic.
If those methods are set on the PIRQ PIC they are just called twice, which
breaks proper resume. This fix restores migration of FreeBSD guests to a
working state.
Sponsored by: Citrix Systems R&D
by ffs and ext2fs. Remove duplicated call to vm_page_zero_invalid(),
done by VOP and by vm_pager_getpages(). Use vm_pager_free_nonreq().
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 6 weeks (after r271596)
