1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
Commit Graph

130328 Commits

Author SHA1 Message Date
Greg Lehey
825df58b28 Add support for selecting from multiple tuners.
Suggested by:	usleepless <usleepless@gmail.com>
2007-02-25 01:28:37 +00:00
Greg Lehey
f65f25a187 Tidy up forrmat. No functional changes. 2007-02-25 01:08:17 +00:00
Robert Watson
dd0cb30f89 Further style(9) for ipx_ip. 2007-02-25 00:17:56 +00:00
Robert Watson
ca642fe976 Improve ipx_ip.c's approximation of style(9). 2007-02-25 00:10:59 +00:00
Sam Leffler
cb8c905ae9 use getifaddrs from libc instead of private code
Reviewed by:	bms
MFC after:	1 month
2007-02-24 23:55:46 +00:00
Sam Leffler
16d84e0140 don't call ath_reset when processing sysctl's before the device
is marked running; we don't have all the needed state in place

Noticed by:	Hugo Silva <hugo@barafranca.com>
MFC after:	1 week
2007-02-24 23:23:29 +00:00
Sam Leffler
8debcae44f set the antenna switch when fixing the tx antenna using the
dev.ath.X.txantenna sysctl; this is typically what folks
want but beware this has the side effect of disabling rx
diversity

MFC after:	2 weeks
2007-02-24 23:12:58 +00:00
Simon L. B. Nielsen
eb29c8f465 - Use a permanent URL to reference piso's mail.
- Put URL on seperate line to not get very long lines.
2007-02-24 21:59:18 +00:00
Bruce M Simpson
c15ddad979 Use sysctl(2), not kvm(3), to read IPv6 multicast information from
the running system.
Use the name 'IPv6 Forwarding Table', not 'IPv6 Routing Table', to be
consistent with what the code actually does and is.
2007-02-24 21:58:30 +00:00
Bruce M Simpson
848b41603f Use the names 'IPv4' and 'Forwarding Table' in program output, not
'Routing Table', to be consistent with what the code actually does and is.
2007-02-24 21:56:52 +00:00
Bruce M Simpson
4f487dfc1a Add comments about where netstat is using KVM to read things which
should really be available via sysctl for a running system.
2007-02-24 21:42:21 +00:00
Bruce M Simpson
33672cd978 Reword addition about MROUTING.
Submitted by:	ru
2007-02-24 21:21:53 +00:00
Bruce M Simpson
1291e2a0eb Fix tinderbox. ip6_mrouter should be defined in raw_ip6.c as it is
tested to determine if the userland socket is open; this, in turn, is
used to determine if the module has been loaded.

Tested with:	LINT
2007-02-24 21:09:35 +00:00
Paolo Pisati
82e5a02886 Update my previous note about newbus API breakage mentioning the
__FreeBSD_version bump.
2007-02-24 20:15:04 +00:00
Paolo Pisati
663829fe1a Note newbus API & ABI breakage. 2007-02-24 19:45:09 +00:00
Paolo Pisati
531db8b139 Updated ia64 isa support with the new bus_setup_intr() syntax.
Approved by: re (implicit?)
2007-02-24 16:56:22 +00:00
Alexander Leidinger
802e08a360 Partial MFp4 of 114977:
Whitespace commit: Fix grammar, spelling and punctuation.

Submitted by:	"Scot Hetzel" <swhetzel@gmail.com>
2007-02-24 16:49:25 +00:00
Warner Losh
e2ae5821fe exca->pccarddev should always be non-null now. Only call it when the
device is actually attached.
2007-02-24 15:56:06 +00:00
Xin LI
c55e033cca Convert sis(4) to use its own watchdog procedure.
Submitted by:	Florian C. Smeets <flo kasimir com>
2007-02-24 14:27:36 +00:00
Bruce M Simpson
08bc2d8a36 Note that IPv6 multicast forwarding is now dynamically loadable. 2007-02-24 11:41:05 +00:00
Bruce M Simpson
6be2e366d6 Make IPv6 multicast forwarding dynamically loadable from a GENERIC kernel.
It is built in the same module as IPv4 multicast forwarding, i.e. ip_mroute.ko,
if and only if IPv6 support is enabled for loadable modules.
Export IPv6 forwarding structs to userland netstat(1) via sysctl(9).
2007-02-24 11:38:47 +00:00
Paolo Pisati
ceca3a3873 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Approved by: re (implicit?)
2007-02-24 02:28:07 +00:00
Matt Jacob
5f53837698 Redo previous newbus related change to be kinder to
multi-release support.
2007-02-23 23:13:46 +00:00
John Baldwin
6e50e38fcc Use tsleep() rather than msleep() with a NULL mtx parameter. 2007-02-23 23:06:10 +00:00
John Baldwin
4a50bbc03e Whitespace fix. 2007-02-23 23:05:31 +00:00
Scott Long
04f0ce213f Fix a case in rman_manage_region() where the resource list would get missorted.
This would in turn confuse rman_reserve_resource().  This was only seen for
MSI resources that can get allocated and deallocated after boot.
2007-02-23 22:53:56 +00:00
Alexander Leidinger
1a26db0a3a MFp4 (114193 (i386 part), 114194, 114195, 114200):
- Dont "return" in linux_clone() after we forked the new process in a case
   of problems.
 - Move the copyout of p2->p_pid outside the emul_lock coverage in
   linux_clone().
 - Cache the em->pdeath_signal in a local variable and move the copyout
   out of the emul_lock coverage.
 - Move the free() out of the emul_shared_lock coverage in a preparation
   to switch emul_lock to non-sleepable lock (mutex).

Submitted by:	rdivacky
2007-02-23 22:39:26 +00:00
Alexander Leidinger
e8b8b834b4 MFp4 (part of 114132):
- Fix a LOR caused by holding emul_lock and proctree_lock at once.

Submitted by:	rdivacky
2007-02-23 22:29:24 +00:00
Matt Jacob
af4394d40a Don't attempt to load illegal hard loop addresses into
an ICB. This shows up on card restarts, and usually for
2200-2300 cards. What happens is that we start up,
attempting to acquire a hard address. We end up instead
being an F-port topology, which reports out a loop id
of 0xff (or 0xffff for 2K Login f/w). Then, if we restart,
we end up telling the card to go off an acquire this loop
address, which the card then rejects. Bah.

Compilation fixes from Solaris port.
2007-02-23 21:59:21 +00:00
Remko Lodder
217d9e4862 Only match on log messages containing fail,invalid,
bad or illegal. This prevents matching on systems that
have a name that matches the query.

PR:		conf/107560
Submitted by:	Christian Laursen <cfsl at pil dot dk>
MFC after:	3 days
Approved by:	imp (mentor)
2007-02-23 21:42:54 +00:00
Ceri Davies
6c11797498 Use the RB_AUTOBOOT define over 0.
Approved by:	ru (mentor)
2007-02-23 21:15:14 +00:00
Remko Lodder
54084306cd Fix the cdboot twiddle display.
I created and tested this with a custom FreeSBIE cd-image.

PR:		i386/96452
Submitted by:	Yuichiro Goto <y7goto at gmail dot com>
MFC after:	3 days
Approved by:	imp (mentor)
2007-02-23 21:07:44 +00:00
Brian Somers
98fff6b57c Account for di_blocks allocations when IN_SPACECOUNTED is set in an
inode's i_flag.

It's possible that after ufs_infactive() calls softdep_releasefile(),
i_nlink stays >0 for a considerable amount of time (> 60 seconds here).
During this period, any ffs allocation routines that alter di_blocks
must also account for the blocks in the filesystem's fs_pendingblocks
value.

This change fixes an eventual df/du discrepency that will happen as
the result of fs_pendingblocks being reduced to <0.

The only manifestation of this that people may recognise is the
following message on boot:

    /somefs: update error: blocks -N files M

at which point the negative pending block count is adjusted to zero.

Reviewed by:	tegge
MFC after:	3 weeks
2007-02-23 20:23:35 +00:00
Paolo Pisati
e251ed48e9 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Approved by: re (implicit?)
2007-02-23 20:11:27 +00:00
John Baldwin
860d8e2312 Use ih_filter instead of ih_handler in a couple of places. This fixes
most INTR_FAST handlers on i386.

Reviewed by:	piso
2007-02-23 20:03:24 +00:00
John Baldwin
498eccc919 Drop the global kernel linker lock while executing the sysinit's for a
freshly-loaded kernel module.  To avoid various unload races, hide linker
files whose sysinit's are being run from userland so that they can't be
kldunloaded until after all the sysinit's have finished.

Tested by:	gallatin
2007-02-23 19:46:59 +00:00
Warner Losh
0024ec11a6 Catchup with filters 2007-02-23 19:41:34 +00:00
Ariff Abdullah
5583760956 - Revert arguments for several functions to pre bus_get_dma_tag()
changes. Each softc contains information about their own device_t,
  use that instead.
- bus_setup_intr() -> snd_setup_intr().
2007-02-23 19:41:16 +00:00
Ariff Abdullah
2cc08b748c - Compile time compatibility for pre/post newbus API (intr filter)
changes. This should ease the job of maintaining codebase since much
  of the regression tests are done across os versions.
- bus_setup_intr() -> snd_setup_intr().
2007-02-23 19:40:13 +00:00
Ariff Abdullah
78bb065b84 Use snd_setup_intr() instead of bus_setup_intr() , like other drivers. 2007-02-23 19:39:06 +00:00
Andrew Thompson
9c68675bae Move the lock init until after if_alloc in case the allocation fails and we
free the softc and return.

MFC after:	3 days
2007-02-23 19:37:55 +00:00
Maksim Yevmenkin
6bfc799ccf Check that the length of the received message is at least as big as a PDU
before we use pdu->len.

Submitted by:	Iain Hibbert
MFC after:	3 days
2007-02-23 19:37:47 +00:00
Warner Losh
21ab16bd5b Catchup with filters 2007-02-23 19:34:52 +00:00
Warner Losh
6b73b37b95 Catchup to filters by piso. 2007-02-23 19:27:49 +00:00
Remko Lodder
4ee46876eb Move to the preferred syntax for nice (-n) instead
of the depricated one.

PR:		conf/108611
Submitted by:	TAOKA Fumiyoshi <fmysh at iijmio-mail dot jp>
Approved by:	imp (mentor)
2007-02-23 18:44:20 +00:00
Jordan Sissel
ee35eb7aa1 Make cu/tip handle when $HOME is not set in the environment.
Approved by: philip
Submitted by: ale
PR: bin/108775
2007-02-23 18:41:12 +00:00
Jens Schweikhardt
c8651f7400 Correct two grammos. 2007-02-23 16:50:17 +00:00
John Baldwin
a96255b62d Use 'pause' in several places rather than trying to tsleep() on NULL (which
triggers a KASSERT) or local variables.  In the case of kern_ndis, the
tsleep() actually used a common sleep address (curproc) making it
susceptible to a premature wakeup.
2007-02-23 16:25:08 +00:00
John Baldwin
37e80fcac2 Add a new kernel sleep function pause(9). pause(9) is for places that
want an equivalent of DELAY(9) that sleeps instead of spins.  It accepts
a wmesg and a timeout and is not interrupted by signals.  It uses a private
wait channel that should never be woken up by wakeup(9) or wakeup_one(9).

Glanced at by:	phk
2007-02-23 16:22:09 +00:00
Paolo Pisati
80b7fd0f47 Bump __FreeBSD_version after newbus api modification.
Reviewed by: re@
Approved by: re@
2007-02-23 16:21:08 +00:00