lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
Author: Edwin Groothuis <edwin@FreeBSD.org>
64-bit quota sizes by scaling down the sizes by the minimum amount
necessary to fit in a 32-bit field and then upscale the filesystem
block size to compensate. For example, if the hard block limit is
0x300000008 then we set the hard block limit to 0xA0000002 and claim
that the blocksize is 4 * DEV_BSIZE. This will lose the minimal
amount of information thus delivering nearly correct answers.
o Use obj->tlsinitsize to determine whether there's initialized data.
o If obj->tlssize > obj->tlsinitsize, then bzero uninitialized data.
o Don't exclude variant I from the work-around in free_tls_offset().
This makes it a little easier to figure out which application was
responsible for this log entry. Ideally we should add an ut_process or
something similar.
Suggested by: Vincent Poy <vincepoy gmail com>
Also perform a small cleanup to ftpd_logwtmp(). Just use a NULL
parameter for the username to indicate a logout, instead of an empty
string.
Reported by: Alexey Shuvaev <shuvaev physik uni-wuerzburg de>
The ttyslot() function was originally part for SUSv1, marked LEGACY in
SUSv2 and removed later on. This function only makes sense when using
utmp(5), because it was used to determine the offset of the record for
the controlling TTY. It makes little sense to keep it here, because the
new utmpx file format doesn't index based on TTY slots.
Unfortunately I have to partially wreck its functionality, though. ftpd
used to keep a file descriptor to the wtmp, which allowed it to work
from within a chroot. The current utmpx implementation doesn't offer a
way to do this. Maybe we can address this in the future, if it turns out
to be a real issue.
It seems comsat stats the utmpx database each 15 seconds to see whether
it has been changed. I am changing this behaviour to look at the utmpx
database upon processing. I don't want to allow direct interference with
the database files. I also wonder whether this optimization has any
measurable performance benefit nowadays.
- It shouldn't call logwtmp(). Applications like login(1) already make
sure both login and logout entries are written to the storage.
- There's no need to restore permissions on the pseudo-terminal, since
it should be garbage collected by the kernel.
Just like bin/ and sbin/, I think setting WARNS to the highest value
possible will make it more attractive for people to fix warnings.
- The WARNS variable is set in the Makefile in the directory of the
application itself, making it more likely that it will be removed out
of curiosity to see what happens.
- New applications will most likely build with WARNS=6 out of the box,
because the author would more likely fix the warnings during
development than lower WARNS.
Unfortunately almost all apps in libexec require a lowered value of
WARNS.
Because strings are now null-terminated, I've decided to just use an
array of utmpx structures, instead of the separated strings. This means
we just copy the entire utmpx structure and point to the strings within
the structures directly.
I increased the WARNS, but it looks like it breaks certain architectures
with more strict alignment requirements (mips, sparc64, ia64).
Pointy hat to: me
One of the things I really want to do, is to get rid of the limitations
of our current utmp(5) mechanism:
- It only allows 8 byte TTY device names.
- The hostname only allows 16 bytes of storage.
I'm not a big fan of <utmpx.h>, but I think we should at least try to
add parts of it. Unfortunately we cannot implement <utmpx.h>, because we
miss various fields, such as ut_id, ut_pid, etc. The API provided by
libulog shares some similarities with <utmpx.h>, so it shouldn't be too
hard to port these applications eventually. In most simple cases, it
should just be a matter of removing the ulog_ prefix everywhere.
As a bonus, it also implements a function called ulog_login_pseudo(),
which allows unprivileged applications to write log entries, provided
they have a valid file descriptor to a pseudo-terminal master device.
libulog will allow a smoother transition to a new file format by adding
a library interface to deal with utmp/wtmp/lastlog files. I initially
thought about adding the functionality to libutil, but because I'm not
planning on keeping this library around forever, we'd better keep it
separated.
Next items on the todo list:
1. Port applications in the base system (and ports) to libulog, instead
of letting them use <utmp.h>.
2. Remove <utmp.h>, implement <utmpx.h> and reimplement this library on
top.
3. Port as many applications as possible back to <utmpx.h>.
adjustment for all virtual addresses encoded into the ELF structures of
it. PIE binary could and should be loaded at non-zero mapbase.
For sym_zero pseudosymbol used as a return value from find_symdef()
for undefined weak symbols, st_value also should be adjusted, since
_rtld_bind corrects symbol values by relocbase.
Discussed with: bz
Reviewed by: kan
Tested by: bz (i386, amd64), bsam (linux)
MFC after: some time
ELF header from the front of the file. As all other I/O on the binary
is done using mmap(), this avoids the need for seek privileges on the
file descriptor during run-time linking.
MFC after: 1 month
Sponsored by: Google
it from the build.
If you are using the FTP daemon, please consider using the port ftp/tnftpd
which is the same FTP server, but newer and might have more/better
functionality.
This results in us providing only one ftp daemon by default.
Reviewed by: bz
Approved by: imp (mentor, implicit)
MFC after: 3 days
Silence from: obrien
is not equal to its memory size.
This eliminates unneeded clearing of the text segment that often
happens due to text end not being page-aligned.
For instance,
$ readelf -l /lib/libedit.so.6
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x00000000 0x00000000 0x139e1 0x139e1 R E 0x1000
LOAD 0x014000 0x00014000 0x00014000 0x00f04 0x00f14 RW 0x1000
DYNAMIC 0x014cc4 0x00014cc4 0x00014cc4 0x000d0 0x000d0 RW 0x4
$ procstat -v $$ (for /bin/sh)
68585 0x28097000 0x280aa000 r-x 6 0 21 14 CN vn /lib/libedit.so.6
68585 0x280aa000 0x280ab000 r-x 1 0 1 0 CN vn /lib/libedit.so.6 <==
68585 0x280ab000 0x280ac000 rwx 1 0 1 0 CN vn /lib/libedit.so.6
Note the splitted map entry marked by '<=='.
Reviewed by: kan
Approved by: re (kensmith)
MFC after: 1 month
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC generates
local calls to this function which result in absolute relocations put into
position-independent code segment, making dynamic loader do extra work everys
time given shared library is being relocated and making affected text pages
non-shareable.
Reviewed by: kib
Approved by: re (kensmith)
altered through their .init code. This might happen if init
vector calls dlopen on its own and that dlopen causes some not
yet initialized object to be initialized earlier as part of that
dlopened DAG.
Do not reset module reference counts to zero on final fini vector
run when process is exiting. Just add an additional parameter to
force fini vector invocation regardless of current reference count
value if object was not destructed yet. This allows dlclose called
from fini vector to proceed normally instead of failing with handle
validation error.
Reviewed by: kib
Reported by: venki kaps
dlsym seaches using this handle are expected to look for symbol
definitions in all objects loaded at the program start time along
with all objects currently in RTLD_GLOBAL scope.
Discussed with: kib
Reported by: Maho NAKATA
MFC after: 2 weeks
The makekey utility has been deprecated and will be removed in a future
release of FreeBSD.
Actually removing it was approved back on 10/29/2007 by re (kensmith) but
I dropped the ball on actually removing it. It's doubtful that it's become
more relevant/useful in the intervening time.
for the mapping by the object' file with the protection and mode of
the first loadable segment over the whole region. Then, it maps other
segments at the appropriate addresses inside the region.
On amd64, due to default alignment of the segments being 1Gb, the
subsequent segment mappings leave the holes in the region, that usually
contain mapping of the object' file past eof. Such mappings prevent
wiring of the address space, because the pages cannot be faulted in.
Change the way the mapping of the ELF objects is constructed, by first
mapping PROT_NONE anonymous memory over the whole range, and then
mapping the segments of the object over it. Take advantage of this new
order and allocate .bss by changing the protection of the range instead
of remapping.
Note that we cannot simply keep the holes between segments, because
other mappings may be made there. Among other issues, when the dso is
unloaded, rtld unmaps the whole region, deleting unrelated mappings.
The kernel ELF image activator does put the holes between segments, but
this is not critical for now because kernel loads only executable image
and interpreter, both cannot be unloaded. This will be fixed later, if
needed.
Reported and tested by: Hans Ottevanger <fbsdhackers beasties demon nl>
Suggested and reviewed by: kan, alc
dlfunc() called dlsym() to do the work, and dlsym() determines the dso
that originating the call by the return address. Due to this, dlfunc()
operated as if the caller is always the libc.
To fix this, move the dlfunc() to rtld, where it can call the internal
implementation of dlsym, and still correctly fetch return address.
Provide usual weak stub for the symbol from libc for static binaries.
dlfunc is put to FBSD_1.0 symver namespace in the ld.so export to
override dlfunc@FBSD_1.0 weak symbol, exported by libc.
Reported, analyzed and tested by: Tijl Coosemans <tijl ulyssis org>
PR: standards/133339
Reviewed by: kan
the rtld hints file. This environment variable would be unset if the
process is considered as tainted with setuid/setgid. This feature gives
a convenient way of using a custom set of shared library that is not
located in the default location and switch back.
Feature requested by: iXsystems
Original patch by: John Hixson
MFC after: 2 weeks
soneeded pathes. The $ORIGIN, $OSNAME, $OSREL and $PLATFORM tokens
are supported. Enabling the substitution requires DF_ORIGIN flag in
DT_FLAGS or DF_1_ORIGIN if DF_FLAGS_1, that may be set with -z origin
gnu ld flag. Translation is unconditionally disabled for setuid/setgid
processes.
The $ORIGIN translation relies on the AT_EXECPATH auxinfo supplied
by kernel.
Requested by: maho
Tested by: maho, pho
Reviewed by: kan
Pseudo-terminals allocated with posix_openpt(2) will have more slashes
in their path names than comsat(8) allows, so allow slashes when the
character device name starts with "pts/".
This patch is loosely based on NetBSD's changes, revision 1.33. Because
it also included the changes to fork(), I imported them here as well.
Maybe we could import even more fixes from the other BSD's?
Original commit message from the NetBSD folks:
PR/30170: Markus W Kilbinger: src/libexec/comsat complains
about: '/' in "/dev/pts/1"
Reported by: Robert Huff <roberthuff rcn com>
long commands into multiple requests. [08:12]
Avoid calling uninitialized function pointers in protocol switch
code. [08:13]
Merry Christmas everybody...
Approved by: so (cperciva)
Approved by: re (kensmith)
Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
does not use any external symbols, thus avoiding possible recursion into
rtld to resolve symbols, when called.
Reviewed by: kan, davidxu
Tested by: rink
MFC after: 1 month
Threading library calls _pre before the fork, allowing the rtld to
lock itself to ensure that other threads of the process are out of
dynamic linker. _post releases the locks.
This allows the rtld to have consistent state in the child. Although
child may legitimately call only async-safe functions, the call may
need plt relocation resolution, and this requires working rtld.
Reported and debugging help by: rink
Reviewed by: kan, davidxu
MFC after: 1 month (anyway, not before 7.1 is out)
Some time ago I got some reports MPSAFE TTY broke telnetd(8). Even
though it turned out to be a different problem within the TTY code, I
spotted a small issue with telnetd(8). Instead of allocating PTY's using
openpty(3) or posix_openpt(2), it used its own PTY allocation routine.
This means that telnetd(8) still uses /dev/ptyXX-style devices.
I've also increased the size of line[]. Even though 16 should be enough,
we already use 13 bytes ("/dev/pts/999", including '\0'). 32 bytes gives
us a little more freedom.
Also enable -DSTREAMSPTY. Otherwise telnetd(8) strips the PTY's pathname
to the latest slash instead of just removing "/dev/" (e.g. /dev/pts/0 ->
0, instead of pts/0).
Reviewed by: rink
derivitive of NetBSD's mips_reloc.c, so pull in the copyright notice
from there.
Also, a minor tweak to load/store pointers. Other changes from NetBSD
likely would be useful too...
Obtained from: NetBSD
from working.
From p4 filelog of the upstream file in p4
//depot/projects/mips2-jnpr/src/libexec/rtld-elf/mips/reloc.c
... #6 change 140737 edit on 2008/04/27 by gonzo@gonzo_jeeves (text+ko)
o Looks like handler for R_MIPS_REL32 brought by CS 137942
is broken for tradmips. Code from NetBSD's
libexec/ld.elf_so/arch/mips/mips_reloc.c works just fine.
... #3 change 137942 edit on 2008/03/17 by rrs@rrs-mips2-jnpr (text+ko)
Any relocation symbol lookup if its 0. It looks like
this is the way the compiler indicates you need to
look in another shared library. When we hit these
as we relocate a object we will do the symbol
lookups and setup the relocation table with the
right value.
Submitted by: rrs@, gonzo@
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
bit flag, otherwise if a thread acquired a lock, another thread
or the current thread itself can no longer acquire another lock
because thread_mask_set() return whole flag word, this results
bit leaking in the word and misbehavior in later locking and
unlocking.
contexts as rtld's malloc is not thread safe and is only supposed to be
called with exclusive bind lock already held.
The originating PR submitted a patch on top of different pre-requisite
workaroud for unsafe dlopen calls, and the patch was midief slighlty to apply
to stock sources for the purpose of this commit. Running rtld malloc from
unlocked contexts is a bug on its own.
PR: 126950
Submited by: Oleg Dolgov
Before we had a posix_openpt() that allocated PTY's with proper
permissions in place, we used this set-uid utility to change the
ownership of PTY slave devices to the real user ID of the process. This
utility was used to implement grantpt().
In my first designs of the MPSAFE TTY layer, I replaced this by adding
an ioctl() called TIOCGRANTPT, which was used to change the ownership.
I left the pt_chown utility, because older C libraries needed it to work
properly.
After some discussions back in June I changed the PTY code to set
permissions properly upon creation. Fortunately the previous grantpt()
implementation changed permissions by hand when pt_chown is not
installed, which always succeeds. This means grantpt() still works
properly, even though the set-uid utility is missing.
I've done tests with FreeBSD 5.2.1, FreeBSD 6.3 and FreeBSD 7.0 jails.
All of them still work if I remove pt_chown.
Reviewed by: philip (ex-mentor)
understand which code paths aren't possible.
This commit eliminates 117 false positive bug reports of the form
"allocate memory; error out if pointer is NULL; use pointer".
- It is opt-out for now so as to give it maximum testing, but it may be
turned opt-in for stable branches depending on the consensus. You
can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
It is harmless to steal the knob as SSP symbols have been provided
by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
(sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
libc will be automatically downgraded to -fstack-protector because it
breaks rtld otherwise.
- This option is unavailable on ia64.
Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.
Submitted by: Jeremie Le Hen <jeremie@le-hen.org>
programs.
From the PR description:
The gcc runtime's _Unwind_Find_FDE function, invoked during exception
handling's stack unwinding, is not safe to execute from within multiple
threads. FreeBSD' s dl_iterate_phdr() however permits multiple threads
to pass through it though. The result is surprisingly reliable infinite
looping of one or more threads if they just happen to be unwinding at
the same time.
Introduce the new lock that is write locked around the dl_iterate_pdr,
thus providing required exclusion for the stack unwinders.
PR: threads/123062
Submitted by: Andy Newman <an at atrn org>
Reviewed by: kan
MFC after: 2 weeks
This code came from the merged mips2 and Juniper mips repositories.
Warner Losh, Randall Seager, Oleksandr Tymoshenko and Olivier Houchard
worked to merge, debug and integrate this code. This code may also
contain code derived from NetBSD.
sparc64, use ANSI function headers and specifically indicate the lack of
arguments with 'void'. Otherwise, warnings are generated at WARNS=3 for
libkse, leading to a compile failure with -Werror.
unique names based on the submitted filename, a strftime(3) format
string and a two digit sequence number.
By default the strftime(3) format string is %Y%m%d (YYYYMMDD), but
this can be changed by the -F option.
PR: bin/106049 (based on patch in that PR)
Approved by: grog@ (mentor)
src/Makefile.inc1 rev. 1.590, it can allow installing a world
cross-built for a different arch over the live system. The procedure
is more or less as follows:
cp -R /rescue /rescue.old
make installkernel TARGET_ARCH=foo
make -DNO_RTLD installworld TARGET_ARCH=foo
^^^^^^^^^
PATH=/rescue.old
chflags noschg /libexec/ld-elf.so.1
cp /usr/obj/foo/usr/src/libexec/rtld/ld-elf.so.1 /libexec
chflags schg /libexec/ld-elf.so.1
<ditto for ld-elf32.so.1 if installing for amd64>
reboot
in the way we implement handling of relocations.
As for the kernel part this fixes the loading of lots of modules,
which failed to load due to unresolvable symbols when built after
the GCC 4.2.0 import. This wasn't due to a change in GCC itself
though but one of several changes in configuration done along the
import. Specfically, HAVE_AS_REGISTER_PSEUDO_OP, which causes GCC
to denote global registers used for scratch purposes and in turn
GAS uses R_SPARC_OLO10 relocations for, is now defined.
While at it replace some more ELF_R_TYPE which should have been
ELF64_R_TYPE_ID but didn't cause problems so far.
- Sync a sanity check between kernel and rtld(1) and change it to be
maintenance free regarding the type used for the lookup table.
- Sprinkle const on lookup tables.
- Use __FBSDID.
Reported and tested by: yongari
MFC after: 5 days
itself. It needs mmap(2), which now needs getosreldate(3) and
which in turn uses a global variable to cache the result. This
cannot be done before linking is done.
See also: ../sparc64/reloc.c:1.15
Approved by: re (kensmith)
setenv(3) by tracking the size of the memory allocated instead of using
strlen() on the current value.
Convert all calls to POSIX from historic BSD API:
- unsetenv returns an int.
- putenv takes a char * instead of const char *.
- putenv no longer makes a copy of the input string.
- errno is set appropriately for POSIX. Exceptions involve bad environ
variable and internal initialization code. These both set errno to
EFAULT.
Several patches to base utilities to handle the POSIX changes from
Andrey Chernov's previous commit. A few I re-wrote to use setenv()
instead of putenv().
New regression module for tools/regression/environ to test these
functions. It also can be used to test the performance.
Bump __FreeBSD_version to 700050 due to API change.
PR: kern/99826
Approved by: wes
Approved by: re (kensmith)
potentially dangerous environment variables all together. It should be
noted that the run-time linker will not honnor these environment variables
if the process is tainted currently. However, once a child of the tainted
process calls setuid(2), it's status as being tainted (as defined by
issetugid(2)) will be removed. This could be problematic because
subsequent activations of the run-time linker could honnor these
dangerous variables.
This is more of an anti foot-shot mechanism, there is nothing I am
aware of in base that does this, however there may be third party
utilities which do, and there is no real negative impact of clearing
these environment variables.
Discussed on: secteam
Reviewed by: cperciva
PR: kern/109836
MFC after: 2 weeks
symbol lookup failures that later result in null-pointer
dereferences. This needs looking into, but since we're
close to release it's possible that it's not resolved before
that time.
Warning, after symbol versioning is enabled, going back is not easy
(use WITHOUT_SYMVER at your own risk).
Change the default thread library to libthr.
There most likely still needs to be a version bump for at least the
thread libraries. If necessary, this will happen later.
Not because I admit they are technically wrong and not because of bug
reports (I receive nothing). But because I surprisingly meets so
strong opposition and resistance so lost any desire to continue that.
Anyone who interested in POSIX can dig out what changes and how
through cvs diffs.
to override weak symbols exported by libc, so by definition these two
are using the same symbol version names.
Reflect the reality by referring to libc's Versions.def directly.
The support for RFC 2640 (UTF8) is optional and rudimentary.
The server just advertises its capability to handle UTF-8 file
names and relies on its own 8-bit cleanness, as well as on
the backward compatibility of UTF-8 with ASCII. So uploaded
files will have UTF-8 names, but the initial server contents
should be prepared in UTF-8 by hand, no on-the-fly conversion
of file names will be done.
PR: bin/111714
Submitted by: Zhang Weiwu <see email in the PR>
MFC after: 1 week
main object list, its versioning information needs to be examined
separately.
This hopefully fixes problems that people running with SYMVER_ENABLED
are experiencing.
activate the traces, set the LD_UTRACE (or LD_32_UTRACE) environment
variable. This also includes code in kdump(8) to parse the traces.
Reviewed by: kan, jdp
MFC after: 2 weeks
dso that are actually loading. If dso a.so depends on b.so, then dlsym
with handle from dlopen("b.so") will fail unconditionally.
Correct implementation shall use the Obj_Entry.needed list to walk
dependencies DAG.
Test provided by: jkim
Tested (prev. version) by: jkim, Nicolas Blais <nb_root at videotron ca>, h.blanke at chello nl
Pointy hat to: kib
Approved by: kan (mentor)
given as dso handle, but also in the implicit dependencies of that dso.
Also, const-ify the read-only parameter objlist of symlook_list.
Reported by: "Simon 'corecode' Schubert" <corecode at fs ei tum de>
Approved by: kan (mentor)
X-MFC-After: 6.2
ignoring errors when sourcing rc.conf* files. The most common error
occurs when users put a command of some sort into those files.
(ifconfig is a popular choice)
2. Make the file rotation logic simpler by starting one down from
the "top" of the list, rather than at the top.
3. Try to make file rotation more secure by calling unlink(1) on all
new file names before rotating an old file to the new name, rather than
merely calling 'rm -f' on any files that exceed the number of files
to save.
- Don't use full path in .Nm (we just don't do that).
- Correct some frivolous and poorly rendering language,
such as using possessive case for .Nm or .Fl .
- Use the same capitalization for "user ID" as in setuid(2) and getuid(2).
- Bring SEE ALSO in accord with the text.
MFC after: 5 days
crunched floppies, but they can be included as options in
src/release/picobsd (omitted by default though.) Therefore
preserve the RELEASE_CRUNCH knob in their Makefiles, but
tell its real purpose in a comment.
from accept(2) and fork(2). Also close all unneeded fds
in the child process, namely listening sockets for all
address families and the fd initially obtained from accept(2).
(The main ftpd code operates on stdin/stdout anyway as it
has been designed for running from inetd.)
MFC after: 5 days
By default, create a pid file at the standard location, /var/run/ftpd.pid,
in accord with the expected behavior of a stock system daemon.
MFC after: 5 days
* Add posix_memalign().
* Move calloc() from calloc.c to malloc.c. Add a calloc() implementation in
rtld-elf in order to make the loader happy (even though calloc() isn't
used in rtld-elf).
* Add _malloc_prefork() and _malloc_postfork(), and use them instead of
directly manipulating __malloc_lock.
Approved by: phk, markm (mentor)
POSIX. This also makes the struct correct we ever implement an i386-time64
architecture. Not that we need too.
Reviewed by: imp, brooks
Approved by: njl (acpica), des (no objects, touches procfs)
Tested with: make universe
oldest versioned symbol available. Do not accept hidden symbols for
all other versions.
Use "<obj->path>: <error message>" for all error messages in new
functions to make them more consistent.
to be compatible with symbol versioning support as implemented by
GNU libc and documented by http://people.redhat.com/~drepper/symbol-versioning
and LSB 3.0.
Implement dlvsym() function to allow lookups for a specific version of
a given symbol.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
we included the length of the path in the returned size but not the length
of the associated Dl_serpath structure. Without this fix, programs
attempting to allocate a structure to hold the search path information
would allocate too small of a buffer and rtld would overrun the buffer
while filling it via a subsequent RTLD_DI_SERINFO request.
Submitted by: "William K. Josephson" wkj at morphisms dot net
Reviewed by: jdp
MFC after: 2 weeks
Like on libthr, there is an i386_set_gsbase() stub implementation here
to avoid libc.so.5 issues. This should likely be a weak symbol and I
expect this will be fixed soon.
Approved by: re
method of executing commands remotely. There are no rexec clients in
the FreeBSD tree, and the client function rexec(3) is present only in
libcompat. It has been documented as "obsolete" since 4.3BSD, and its
use has been discouraged in the man page for over 10 years.
loads and stores (resp.) The ldq_u and stq_u instruction mask off the
lower 3 bits of the final address before loading from or storing to
the address, so as to avoid unaligned loads and stores. They do not
themselves allow loads from or stores to unaligned addresses. Replace
the macro definitions by a packed struct dereference.
Submitted by: Richard Henderson (rth at twiddle dot net)
rc.conf[.local]. Fix this, and leave the default as 2048.
Update the copyright year to include the present.
Update the assignment of the copyright to be me personally,
instead of "The FreeBSD Project" which is not a legal entity,
and therefore not a proper assignee. My intention remains the
same however, that this code continue to be BSD licensed, and
freely available to anyone that wants it under those terms.
PR: conf/75722
Submitted by: Nicolas Rachinsky <list@rachinsky.de>
during authentication. Thus we need to call getpwnam *after* the user
has been authenticated. Colin mentioned that we should also move the
check for root in that case.
are initialised to zero. When freeing TLS, don't attempt to free DTV
slots which were not used.
Pointed out by: Joerg Sonnenberger
X-MFC-After: After the branch, probably
5.0-RELEASE), a visually elusive bug was introduced. A comparison
operator was changed to assignment. As a result, rexecd behaved
always as if the `-i' option had been specified. It would allow root
logins. This commit corrects the situation in the obvious way.
A separate bug was introduced at the same time. The PAM library
functions are called between the invocation of getpwnam(3) and the use
of the returned static object. Since many PAM library functions
result in additional getpwnam(3) calls, the contents of the returned
static object could be changed from under rexecd. With this commit,
getpwnam_r(3) is used instead.
Other PAM-using applications should be reviewed for similar errors in
getpw* usage.
Security: rexecd's documented default policy of disallowing root
logins was not enforced.
Reviewed by: cperciva
LD_LIBMAP_DISABLE, LD_LIBRARY_PATH) are used, then make sure the
libraries being loaded aren't on a noexec-mounted filesystem.
This is a compromise position: I'm assuming that nobody will be silly
enough to set the noexec mount flag on part of the default library
path, in order to avoid adding extra overhead into the common case
(where those environment variables aren't used).
Discussed with: csjp, secteam
MFC after: 1 week
Another handy libmap patch. Lets you do stuff like this:
LD_LIBMAP="libpthread.so.1=libthr.so.1" mythreadedapp
If you already have a program-specific override in libmap.conf, note
that you must use a program-specific override in LD_LIBMAP:
LD_LIBMAP="[mythreadedapp],libpthread.so.1=libthr.so.1" mythreadedapp
PR: bin/74471
Submitted by: Dan Nelson <dnelson AT allantgroup.com>
MFC after: 2 weeks
