LPC devices. Among other things, the LPC serial ports now appear as
ACPI devices.
- Move the info for the top-level PCI bus into the PCI emulation code and
add ResourceProducer entries for the memory ranges decoded by the bus
for memory BARs.
- Add a framework to allow each PCI emulation driver to optionally write
an entry into the DSDT under the \_SB_.PCI0 namespace. The LPC driver
uses this to write a node for the LPC bus (\_SB_.PCI0.ISA).
- Add a linker set to allow any LPC devices to write entries into the
DSDT below the LPC node.
- Move the existing DSDT block for the RTC to the RTC driver.
- Add DSDT nodes for the AT PIC, the 8254 ISA timer, and the LPC UART
devices.
- Add a "SuperIO" device under the LPC node to claim "system resources"
aling with a linker set to allow various drivers to add IO or memory
ranges that should be claimed as a system resource.
- Add system resource entries for the extended RTC IO range, the registers
used for ACPI power management, the ELCR, PCI interrupt routing register,
and post data register.
- Add various helper routines for generating DSDT entries.
Reviewed by: neel (earlier version)
times [1]. Assert that the pmap passed to pmap_remove_pages() is only
active on current CPU.
Submitted by: alc [1]
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Unfortunately this causes ICE on powerpc and sparc64.
Reducing these differences against upstream is not important
anymore so hopefully I have finished breaking the compiler
occasionally.
Thus we can use IF_AFDATA_RLOCK() instead of IF_AFDATA_LOCK() when doing
lla_lookup() without LLE_CREATE flag.
Reviewed by: glebius, adrian
MFC after: 1 week
Sponsored by: Yandex LLC
When we encounter an I/O error on a piece of metadata while deleting
a file system or zvol, we don't update the bptree_entry_phys_t's
bookmark. This would lead to double free of bp's which will lead to
space map corruption.
Instead of tolerating and allowing the corruption, panic immediately.
See Illumos #4390 for more details.
4391 panic system rather than corrupting pool if we hit bug 4390
Illumos/illumos-gate@8b36997aa2
MFC after: 2 weeks
The operation was documented and implemented partially (both from a
type and architecture perspective) on 2013-08-21 and got used in
ZFS with revision 260150 (zfeature.c) and since ZFS is supported on
ia64, the lack of having atomic_swap became problem.
- Use simple ++ for rare events.
- Use uma_zone_get_cur() to get knowledge about space left in cache.
- Convert many fields of struct ng_netflow_info to 64 bit.
Tested by: Viktor Velichkin <avisom yandex.ru>
Sponsored by: Nginx, Inc.
hides the setjmp/longjmp semantics of VM enter/exit. vmx_enter_guest() is used
to enter guest context and vmx_exit_guest() is used to transition back into
host context.
Fix a longstanding race where a vcpu interrupt notification might be ignored
if it happens after vmx_inject_interrupts() but before host interrupts are
disabled in vmx_resume/vmx_launch. We now called vmx_inject_interrupts() with
host interrupts disabled to prevent this.
Suggested by: grehan@
Fix race condition in DELAY function: sc->tc was not initialized yet when
time_counter pointer was set, what resulted in NULL pointer dereference.
Export sysfreq to dts.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Using unmapped BIOs causes failure inside bus_dmamap_sync, since
this function requires valid MVA address, which is not present
if mapping is not set up.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Add suport for setting triggering level and polarity in GIC.
New function pointer was added to nexus which corresponds
to the function which sets level/sense in the hardware (GIC).
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
to lla_lookup().
This drastically reduces the very high lock contention when doing parallel
TCP throughput tests (> 1024 sockets) with IPv6.
Tested:
* parallel IPv6 TCP bulk data exchange, 8192 sockets
MFC after: 1 week
Sponsored by: Netflix, Inc.
4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
* msun/man/sinh.3:
* msun/man/tanh.3:
. Fix grammar.
* msun/src/e_coshl.c:
* msun/src/e_sinhl.c:
. Fix comment.
* msun/src/s_tanhl.c:
. Remove unused variables.
. Fix location/indentation of comments.
. Use comparison involving ints instead of long double.
. Re-order polynomial evaluation on ld128 for |x| < 0.25.
For now, retain the older order in an "#if 0 ... #else" block.
. Use int comparison to short-circuit the |x| < 1.5 condition.
Requested by: bde
(Note: this change is not applicable to FreeBSD and the file
is not included in build. It's integrated for completeness).
4128 disks in zpools never go away when pulled
illumos/illumos-gate@39cddb10a3
MFC after: 2 weeks
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man page
and help message
illumos/illumos-gate@31d7e8fa33
FreeBSD porting notes: the kernel part of this changeset depends
on Solaris buf(9S) interfaces and are not really applicable for
our use. vdev_disk.c is patched as-is to reduce diverge from
upstream, but vdev_file.c is left intact.
MFC after: 2 weeks
no longer any need for the page's PG_CACHED and PG_FREE flags to be set and
cleared while the free page queues lock is held. Thus, vm_page_alloc(),
vm_page_alloc_contig(), and vm_page_alloc_freelist() can wait until after
the free page queues lock is released to clear the page's flags. Moreover,
the PG_FREE flag can be retired. Now that the reservation system no longer
uses it, its only uses are in a few assertions. Eliminating these
assertions is no real loss. Other assertions catch the same types of
misbehavior, like doubly freeing a page (see r260032) or dirtying a free
page (free pages are invalid and only valid pages can be dirtied).
Eliminate an unneeded variable from vm_page_alloc_contig().
Sponsored by: EMC / Isilon Storage Division
executable ksh scripts. These are currently not copied into the test
directory the way that compiled executables are, so the tests which make use
of them cannot work. This changes the test Makefile to copy the scripts into
the test directory.
