both the disk partitioning screen (the 'F' key) and via install.cfg (the
VAR_DEDICATED_DISK option). This functionality is currently broken in 8.x
due to libdisk and geom generating different partition names; this commit
merely acts to help steer users away from the breakage.
Submitted by: randi
Approved by: re (kensmith)
of just blowing up. A very similar change to this exists which is
GPLv3 licensed, this is my own change.
This problem was triggered by running the Boost regression tests.
See also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=31899
Reviewed by: luigi
Approved by: re (kib)
non-vrtiualized sysctls so we cannot used one common function.
Add a macro to convert the arg1 in the virtualized case to
vnet.h to not expose the maths to all over the code.
Add a wrapper for the single virtualized call, properly handling
arg1 and call the default implementation from there.
Convert the two over places to use the new macro.
Reviewed by: rwatson
Approved by: re (kib)
this was broken in r183248 when the check of wk_keyix was replaced by
a check of IEEE80211_KEY_DEVKEY (because the flag was clobbered). Define
IEEE80211_KEY_DEVICE to specify flags that are owned by net80211/driver
and use this to preserve IEEE80211_KEY_DEVKEY so we don't ask the driver
for another key index when we already have one.
Testing by: Daniel Thiele, Wes Morgan
Reviewed by: rpaulo
Approved by: re (kib)
actually specify valid bases that should be treated just as normal.
The PCI specifications have no indication that 0 would be a magic value
indicating a disabled BAR as commonly used on at least amd64 and i386
but not sparc64. It's unclear what to do in pci_delete_resource()
instead of writing 0 to a BAR though as there's no (other) way do
disable individual BARs so its decoding is left enabled in case of
__PCI_BAR_ZERO_VALID for now.
Approved by: re (kib), jhb
MFC after: 1 week
Driver supports Serial ATA and ATAPI devices, Port Multipliers
(including FIS-based switching), hardware command queues (31 command
per port) and Native Command Queuing. This is probably the second on
popularity, after AHCI, type of SATA2 controllers, that benefits from
using CAM, because of hardware command queuing support.
Approved by: re (kib)
It turns LBC control registers were not programmed correctly on MPC85XX. We
were accessing bogus addresses as the base offset (OCP85XX_LBC_OFF) was
erroneously added during offset calculations. Effectively the state of LBC
control registers was not altered by the kernel initialization code, but
everything worked as long as we coincided to use the same settings (LBC decode
windows) as firmware has initialized.
Submitted by: Lukasz Wojcik
Reviewed by: marcel
Approved by: re (kensmith)
Obtained from: Semihalf
On some ARM variations CPU func dispatcher has the D-cache invalidate method
point to write-back invalidate, which is wrong, and can lead to a crash/panic
on affected platforms.
Spotted by: HPS
Reviewed by: cognet
Approved by: re (kib)
nagged again via PR. Thank Paul for his persistence and contributions.
PR: 136895
Submitted by: Paul B. Mahol <onemda@gmail.com>
Reviewed by: sam (timeout, 10 days), weongyo (timeout, 10 days), me
Approved by: re (Kostik Belousov <kostikbel@gmail.com>)
back to the bottom of ip_init() as found in 7.x. I missed the fact that
the bottom half of the init routine only runs in the !VNET case.
Submitted by: zec
Approved by: re (vimage blanket)
this change, ZFS uses SunOS Alternate Data Streams semantics - each
EA has its own permissions, which are set at EA creation time
and - unlike SunOS - invisible to the user and impossible to change.
From the user point of view, it's just broken: sometimes access
is granted when it shouldn't be, sometimes it's denied when
it shouldn't be.
This patch makes it behave just like UFS, i.e. depend on current
file permissions. Also, it fixes returned error codes (ENOATTR
instead of ENOENT) and makes listextattr(2) return 0 instead
of EPERM where there is no EA directory (i.e. the file never had
any EA).
Reviewed by: pjd (idea, not actual code)
Approved by: re (kib)
* bridge support (sam)
* handling of errors (sam)
* deletion of inactive routing entries
* more debug msgs (sam)
* fixed some inconsistencies with the spec.
* decap is now specific to mesh (sam)
* print mesh seq. no. on ifconfig list mesh
* small perf. improvements
Reviewed by: sam
Approved by: re (kib)
nor destructors, as there's no actual work to do.
In most cases, the constructors weren't needed because of the existing
protocol initialization functions run by net_init_domain() as part of
VNET_MOD_NET, or they were eliminated when support for static
initialization of virtualized globals was added.
Garbage collect dependency references to modules without constructors or
destructors, notably VNET_MOD_INET and VNET_MOD_INET6.
Reviewed by: bz
Approved by: re (vimage blanket)
a) nocache-remap problem
When a page is remapped into a non-cacheable virtual memory region there
was no associated write-back invalidate operation performed. We remove
writeback of the original buffer size from bus_dmamem_alloc() and add
appropriate L1/L2 flush operation.
b) missing write-back invalidate operation
In pmap_kremove a page is removed so we must do a write-back
invalidate operation aligned to the page virtual address.
Submitted by: Michal Hajduk
Reviewed by: Mark Tinguely, rpaulo, stas
Approved by: re (kib)
Obtained from: Semihalf
amd64 and i386. Essentially, fictitious pages provide a mechanism for
creating aliases for either normal or device-backed pages. Therefore,
pmap_page_set_memattr() on a fictitious page needn't update the direct
map or flush the cache. Such actions are the responsibility of the
"primary" instance of the page or the device driver that "owns" the
physical address. For example, these actions are already performed by
pmap_mapdev().
The device pager needn't restore the memory attributes on a fictitious
page before releasing it. It's now pointless.
Add pmap_page_set_memattr() to the Xen pmap.
Approved by: re (kib)
portion of the page that was written. Among other problems, this
page might be picked up by pagedaemon, with failed assertion in
vm_pageout_flush() about validity of the page.
Reported and tested by: pho
Approved by: re (kensmith)
MFC after: 3 weeks
This implements the POSIX.1-2008 -L and -P flags.
The default remains to create hard links to the target of symlinks.
Approved by: re (kib), ed (mentor)
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
- When the root vnode was acquired during mounting, mnt_stat.f_iosize was
still set to 0, so getnewvnode() would set bo_bsize == 0. This would
confuse getblk(), so that it always returned the first block causing
the problem when the root directory of the mount point was greater
than one block in size. It was fixed by setting mnt_stat.f_iosize to
NFS_DIRBLKSIZ before calling ncl_nget() to acquire the root vnode.
- NFSMNT_INT was being set temporarily while the initial connect to a
server was being done. This erroneously configured the krpc for
interruptible RPCs, which caused problems because signals weren't
being masked off as they would have been for interruptible mounts.
This code was deleted to fix the problem. Since mount_nfs does an
NFS null RPC before the mount system call, connections to the server
should work ok.
Tested by: swell dot k at gmail dot com
Approved by: re (kensmith), kib (mentor)
if _WANT_VNET is defined. This is required so that libkvm can locate
virtual network stack instances in order to reach their global variables
for monitoring and crashdump analysis.
Reviewed by: bz
Approved by: re (kib)
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use). Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.
Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions. Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.
Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.
Update various consumers of these KPIs based on whether they may sleep
or not.
Reviewed by: bz
Approved by: re (kib)
a valid zone ID or interface identifier in a v6 multicast leave, would
trigger a fairly paranoid KASSERT().
Observed with Boost++ regression tests on ref8.freebsd.org.
Approved by: re (kib)
If the access counts were not increased and decreased in equal numbers by
gvinum consumers, the read access count would be inconsistent with the write
access count. Instead, modify the read access count with the write access
count directly to prevent any inconsistencies.
Approved by: re (kib)
configuring machine-dependent memory attributes...":
Don't set the memory attribute for a "real" page that is allocated to
a device object in vm_page_alloc(). It is a pointless act, because
the device pager replaces this "real" page with a "fake" page and sets
the memory attribute on that "fake" page.
Eliminate pointless code from pmap_cache_bits() on amd64.
Employ the "Self Snoop" feature supported by some x86 processors to
avoid cache flushes in the pmap.
Approved by: re (kib)
structs had incorrect member offsets, limiting dtrace's usefulness
when working with them. An example of incorrect info (struct
rtentry) from before this fix:
<1738> STRUCT rtentry (200 bytes)
rt_nodes type=1731 off=0
rt_gateway type=849 off=65280 <== WRONG, should be 8 * 96
rt_flags type=3 off=65344 <== wrong again, and so on..
...
Approved by: re (kib), gnn (mentor)
MFC after: 2 weeks
