* Call it before sending probe responses, so the ACL code has the
chance to reject sending them.
* Pass the whole frame to the ACL code now, rather than just the
destination MAC - that way the ACL module can look at the frame
contents to determine what the response should be.
This is part of some uncommitted work to support band steering.
Sponsored by: Hobnob, Inc.
The reverse direction of a pipe is lazily allocated on the first write in
that direction (because pipes are usually used in one direction only). A
special case is needed to ensure the pipe appears writable before the first
write because there are 0 bytes of pending data in 0 bytes of buffer space
at that point, leaving 0 bytes of data that can be written with the normal
code.
Note that the first write returns [ENOMEM] if kern.ipc.maxpipekva is
exceeded and does not block or return [EAGAIN], so selecting true for write
is correct even in that case.
PR: kern/93685
Submitted by: gianni
MFC after: 2 weeks
objects created by shm_open(2) into the kernel's address space. This
provides a convenient way for creating shared memory buffers between
userland and the kernel without requiring custom character devices.
This removes the obfuscations mentioned in ext2_readwrite and
places the clustering funtion in a location similar to other
UFS-based implementations.
No performance or functional changeses are expected from
this move.
PR: kern/159232
Suggested by: bde
Approved by: jhb (mentor)
MFC after: 2 weeks
sintrnames and sintrcnt are initialized with non-zero values, which were
discarded by the .bss directive, so consumers like "vmstat -i" were not
getting correct data.
Submitted by: Lukasz Plachno
Obtained from: Semihalf
MFC after: 1 month
from the dispatcher would also acquire bind lock in read mode, which
is the supported operation. plt is explicitely designed to allow safe
multithreaded updates, so the shared lock do not cause problems.
The error in r228435 is that it allows read lock acquisition after the
write lock for the bind block. If we dlopened the shared object that
contains IRELATIVE or jump slot which target is STT_GNU_IFUNC, then
possible recursive plt resolve from the dispatcher would cause it.
Postpone the resolution for irelative/ifunc right before initializers
are called, and drop bind lock around calls to dispatcher. Use
initlist to iterate over the objects instead of the ->next, due to
drop of the bind lock in iteration.
For i386/reloc.c:reloc_iresolve(), fix calculation of the dispatch
function address for dso, by taking into account possible non-zero
relocbase.
MFC after: 3 weeks
- Add _Alignas(). Unfortunately this macro is only partially functional.
The C1X standard will allow both an integer and a type name to be
passed to this macro, while this macro only allows an integer. To be
portable, one must use _Alignas(_Alignof(double)) to use type names.
- Don't do _Static_assert() when __COUNTER__ is not supported. We'd
better keep this implementation robust and allow it to be used in
header files, without mysteriously breaking older compilers.
will time out and close opened /dev/dspX.Y device(s), if
any. This is a workaround because we cannot unregister PCM
devices while the audio character device is in use.
Add a missing inclusion guard.
MFC after: 1 weeks
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.
This patch also fixes some build issues in avr32dci.c
MFC after: 2 weeks
- _Alignof(), which returns the aligment of a certain type.
- _Static_assert(), which can be used to check compile-time assertions.
- _Thread_local, which uses TLS on a variable.
MFC after: 3 months
Reviewed by: mdf
messages.
o Add check for actually resolved speed in miibus_statchg callback
instead of blindly reprogramming BCE_EMAC_MODE register. The
callback may be called multiple times(e.g. link UP, link
transition, auto-negotiate complete etc) while auto-negotiation
is in progress. All unresolved link state changes are ignored
now and setting BCE_EMAC_MODE after link establishment is done
once.
o bce(4) is careful enough not to drive MII_TICK if driver got a
valid link. To detect lost link, bce(4) relied on link state
change interrupt and if driver see the interrupt, it forced to
drive MII_TICK by calling bce_tick() in interrupt handler.
Because bce(4) generates multiple link state change interrupts
while auto-negotiation is in progress, bce_tick() would be
called multiple times and this resulted in generating multiple
link UP/DOWN messages.
With this change, bce_tick() is not called in interrupt handler
anymore such that miibus_statchg callback handles link state
changes with consistent manner.
Reviewed by: davidch
__COUNTER__ allows one to obtain incrementing (read: unique) numbers
from the C preprocesor. This is useful when implementing things like a
robust implementation of CTASSERT(), which currently fails when using
it more than once on a single line of code. Probably not likely to cause
any breakage, but still.
__COUNTER__ was also added to GCC 4.3, but since that implementation is
GPLv3 licensed, I took the liberty of implementing it without looking at
any upstream sources. Therefore, this version is licensed under the same
license as the rest of the code; GPLv2.
If I interpret the C standard correctly, the storage specifier should be
placed before the inline keyword. While at it, replace __inline by
inline in the files affected.
As C1X is close to being released, there is no need to wrap around a
feature that is already part of C90. Most of these files already use
`const' in different placed as well.
that changed 0.0.0.0/0.0.0.0 prefix to 0.0.0.0/255.0.0.0.
In the r228313 this behavior was fixed, and since dhclient-script
got broken.
I'm not sure this fix is a perfect one, it just changes
dhclient-script to set 0.0.0.0/255.0.0.0 explicitly.
PR: kern/163206
- in destroy_lun_state() assert hold == 1 instead of 0, as it should
receive hold taken by the create_lun_state() or get_lun_statep() before;
- fix hold count leak inside rls_lun_statep() that also fired above assert;
- in destroy_lun_state() use SIM bus number instead of SIM path id for
ISP_GET_PC_ADDR(), as it was before r196008;
- make isp_disable_lun() to set status in CCB;
- make isp_target_mark_aborted() set status into the proper CCB.
Reviewed by: mjacob
Sponsored by: iXsystems, inc.
MFC after: 1 month
This tool only consists of a single C file, so we can simply mark
everything except main() static. This seems to shave off about 8% of the
binary size.
usage, but end up with more changes.
- Use SIOCAIFADDR instead of old rusty SIOCSIFADDR, SIOCSIFBRDADDR
and SIOCSIFNETMASK.
- Use queue(9) instead of hand made stailq.
- Use one socket for all ifioctl() and send/receive operations.
- Use __func__ instead of cut-n-paste in logging and panics.
- Axe some dead or strange code.
Tested by: gonzo, Stefan Bethke <stb lassitu.de>
