1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
Commit Graph

183271 Commits

Author SHA1 Message Date
Dimitry Andric
992b133da5 Pull in r182983 from upstream clang trunk:
Fix handling of braced-init-list as reference initializer within
  aggregate initialization. Previously we would incorrectly require an
  extra set of braces around such initializers.

Pull in r188718 from upstream clang trunk:

  Handle init lists and _Atomic fields.

  Fixes PR16931.

These fixes are needed for the atomic_flag type to work correctly in our
stdatomic.h.

Requested by:	theraven
2013-08-20 20:51:32 +00:00
Dimitry Andric
df2637d88a Pull in r188716 from upstream clang trunk:
PR16727: don't try to evaluate a potentially value-dependent
  expression when checking for missing parens in &&/|| expressions.

This fixes an assertion encountered when building the lang/sdcc port.

Reported by:	kwm
2013-08-20 20:46:29 +00:00
Andrew Turner
9de51f489e Enable VFP on ARMADA XP. 2013-08-20 20:40:20 +00:00
Navdeep Parhar
2485eeee37 Display P/N information in the description.
Submitted by:	gnn
MFC after:	3 days
2013-08-20 18:22:04 +00:00
John Baldwin
c8e1113b37 Stop an ipoib interface before detaching it.
PR:		kern/181225
Submitted by:	Shahar Klein
Obtained from:	Mellanox
MFC after:	1 week
2013-08-20 18:08:06 +00:00
Hans Petter Selasky
3a8f0c444a Force keyboards which don't have the required
HID fields to use the USB BOOT protocol for now.

PR:		usb/181425
Submitted by:	Andrey Zholos <aaz@q-fu.com>
MFC after:	4 weeks
2013-08-20 16:21:05 +00:00
Bjoern A. Zeeb
a66b2c65c3 Correct a typo in the event mask mnemonic.
Reviewed by:	gnn
MFC after:	3 days
2013-08-20 14:59:31 +00:00
Bjoern A. Zeeb
89ee862616 Catch up with various changes to if_data and make this compile again
on HEAD.  Seems to be one of the the only tools giving us access to
ifi_baudrate and ifi_baudrate_pf values.

MFC after:	3 days
2013-08-20 14:37:06 +00:00
Bjoern A. Zeeb
413e45bf81 After r241616 properly export ifi_baudrate_pf in the 32bit compat case.
MFC after:	3 days
2013-08-20 14:35:17 +00:00
Ian Lepore
59769a581f Make the standard sdhci(4) driver work for the TI OMAP family SoCs.
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.

This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.

This initial incarnation lacks DMA support (coming soon).  Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
2013-08-20 12:33:35 +00:00
Peter Holm
844e14d34c Added sysctl to turn off calls to vmem_check().
Sponsored by:	EMC / Isilon storage division
Discussed with:	 jeff
2013-08-20 11:06:56 +00:00
Dag-Erling Smørgrav
8ce80d4bd4 Fix the zeroing loop. I must have been drunk when I wrote this...
MFC after:	3 days
2013-08-20 07:19:58 +00:00
Neel Natu
b98940e5eb Do not create superpage mappings in the iommu.
This is a workaround to hide the fact that we do not have any code to
demote a superpage mapping before we unmap a single page that is part
of the superpage.
2013-08-20 06:46:40 +00:00
Neel Natu
f77e982952 Extract the location of the remapping hardware units from the ACPI DMAR table.
Submitted by:	Gopakumar T (gopakumar_thekkedath@yahoo.co.in)
2013-08-20 06:20:05 +00:00
Neel Natu
15e683837c Fix breakage caused by r254466 in minidumpsys().
r254466 increased the KVA from 512GB to 2TB which requires 4 PDP pages as
opposed to a single one before the change. This broke minidumpsys() since
it assumed that the entire KVA could be addressed via a single PDP page.

Fix this by obtaining the address of the PDP page from the PML4 entry
associated with the KVA being dumped.

Reported by:	pho
Submitted by:	kib
Pointy hat to:	neel
2013-08-20 02:09:26 +00:00
Jeff Roberson
c9612b2db8 - Increase the active lru refresh interval to 10 minutes. This has been
shown to negatively impact some workloads and the goal is only to
   eliminate worst case behaviors for very long periods of paging
   inactivity.  Eventually we should determine a more complex scaling
   factor for this feature.
 - Rate limit low memory callback handlers to limit thrashing.  Set the
   default to 10 seconds.

Sponsored by:	EMC / Isilon Storage Division
2013-08-19 23:54:24 +00:00
Jeff Roberson
d91722fb27 - Use an arbitrary but reasonably large import size for kva on architectures
that don't support superpages.  This keeps the number of spans and internal
   fragmentation lower.
 - When the user asks for alignment from vmem_xalloc adjust the imported size
   by 2*align to be certain we can satisfy the allocation.  This comes at
   the expense of potential failures when the backend can't supply enough
   memory but could supply the requested size and alignment.

Sponsored by:	EMC / Isilon Storage Division
2013-08-19 23:02:39 +00:00
Andrew Turner
618486449c Enable VFP on the Zedboard. 2013-08-19 22:25:36 +00:00
Andrew Turner
4a90491e55 Subversion requires atomic functions we only support on arm with clang. 2013-08-19 17:44:19 +00:00
John Baldwin
bf59b2c504 Remove incorrect 'const' qualifier from pointers to dynamic string
buffers I added in the previous commit.

Pointy hat to:	jhb
MFC after:	1 month
2013-08-19 17:09:14 +00:00
Andre Oppermann
ed59e60276 Bump __FreeBSD_version to 1000046 after the addition of M_PROTO[9-12]
and removal of M_NOFREE|M_FRAG|M_FIRSTFRAG|M_LASTFRAG mbuf flags.
2013-08-19 16:47:06 +00:00
Rafal Jaworowski
836f82ff43 Do not use pv_kva on ARMv6/v7 and save some space on each vm_page. It's only
relevant for older ARM variants (with virtual cache).

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 16:16:49 +00:00
Rafal Jaworowski
ec34d19b9d Simplify and clean up pmap_clearbit()
There is no need for calling vm_page_dirty() when clearing "modified" flag as
it is already set for that page in pmap_fault_fixup() or pmap_enter() thanks
to "modified" bit emulation.

Also, there is no need for checking PTE "referenced" or "writeable" flags.  If
there is a request to clear a particular flag we should just do it.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 15:58:39 +00:00
Ian Lepore
1662b00871 Allow UART_POLL_FREQ to be set as a kernel option as well as via tunable
(the code was already set up for this, just needs to be in conf/options).

Also, if reporting that polling is being used, report the frequency too.
2013-08-19 15:51:30 +00:00
Rafal Jaworowski
c438c6eb70 Fix ARMv6/v7 mapping's wired status.
Last input argument in pmap_modify_pv() should be a mask of flags to be set.
In pmap_change_wiring() however, the straight wired status was used, which
does not represent valid flags (and is of type boolean).

This commit fixes the issue so that wired flag is passed to pmap_modify_pv()
properly.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 15:36:23 +00:00
Rafal Jaworowski
30f7f10e66 Clear all L2 PTE protection bits before their configuration.
Revise L2_S_PROT_MASK to include all of the protection bits.  Notice that
clearing these bits does not always take away the corresponding permissions
(for example, permission is granted when the bit is cleared). The bits are
cleared but are to be set or left cleared accordingly in pmap_set_prot(),
pmap_enter_locked(), etc.

Clear L2_XN along with L2_S_PROT_MASK in pmap_set_prot() so that all
permissions related bits are cleared before actual configuration.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 15:12:36 +00:00
Rafal Jaworowski
06b6590c4a Simplify pv_entry removal or ARMv6/v7:
- PGA_WRITEABLE indicates that there *might be* a writable mapping for the
  particular page, so to avoid frequent sweeping of the pv_entries whenever
  pmap_nuke_pv(), pmap_modify_pv(), etc. is called, it is sufficient to
  clear that flag if there are no managed mappings for that page anymore
  (notice that only pmap_enter is authorized to set this flag).
- Avoid redundant checking for PVF_WIRED flag when this flag cannot be set
  anyway.
- Clear PGA_WRITEABLE only once for each vm_page instead of multiple,
  redundant clearing it in loop when there are no writeable mappings
  to that page anymore.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 14:56:17 +00:00
Andre Oppermann
5fc98a7895 Reorder the mbuf defines to make more sense and group related flags
together.

Add M_FLAG_PRINTF for use with printf(9) %b indentifier.

Use the generic mbuf flags print names in the net80211 code and adjust
the protocol specific bits for their new positions.

Change SCTP M_PROTO mapping from 5 to 1 to fit within the 16bit field
they use internally to store some additional information.

Discussed with:	trociny, glebius
2013-08-19 14:25:11 +00:00
Andre Oppermann
7100b4d04a Migrate the net80211 protocol specific use of M_FRAG, M_FIRSTFRAG and
M_LASTFRAG flags to protocol specific flags.

Remove the now unused M_FRAG, M_FIRSTFRAG and M_LASTFRAG mbuf flags.

Discussed with:	trociny, glebius, adrian
2013-08-19 14:07:31 +00:00
Glen Barber
88ffe87afe Add entry for packages-9.2-release directory.
Approved by:	re (implicit)
2013-08-19 14:04:35 +00:00
Andre Oppermann
375c0a8a1c Add four additional M_PROTOFLAGS[9-12] for protocol specific use.
Discussed with:	trociny, glebius, adrian
2013-08-19 13:56:14 +00:00
Andre Oppermann
86bd049144 Add m_clrprotoflags() to clear protocol specific mbuf flags at up and
downwards layer crossings.

Consistently use it within IP, IPv6 and ethernet protocols.

Discussed with:	trociny, glebius
2013-08-19 13:27:32 +00:00
David Chisnall
88169e0388 Add support for parameterised device tree sources to the device tree compiler.
Reviewed by:	brooks
Sponsored by:	DARPA, AFRL
2013-08-19 12:37:13 +00:00
Andre Oppermann
678d7b9461 Move the SCTP specific definition of M_NOTIFICATION onto a protocol
specific mbuf flag from sys/mbuf.h to netinet/sctp_os_bsd.h.  It is
only relevant within SCTP.

Discussed with:	tuexen
2013-08-19 12:30:18 +00:00
Andre Oppermann
aa3cb8fb64 Remove the unused M_NOFREE mbuf flag. It didn't have any in-tree users
for a very long time, if ever.

Should such a functionality ever be needed again the appropriate and
much better way to do it is through a custom EXT_SOMETHING external mbuf
type together with a dedicated *ext_free function.

Discussed with:	trociny, glebius
2013-08-19 11:16:53 +00:00
Andre Oppermann
88388bdcbe Move the global M_SKIP_FIREWALL mbuf flags to a protocol layer specific
flag instead.  The flag is only used within the IP and IPv6 layer 3
protocols.

Because some firewall packages treat IPv4 and IPv6 packets the same the
flag should have the same value for both.

Discussed with:	trociny, glebius
2013-08-19 11:08:36 +00:00
Andre Oppermann
b09dc7e328 Move ip_reassemble()'s use of the global M_FRAG mbuf flag to a protocol layer
specific flag instead.  The flag is only relevant while the packet stays in
the IP reassembly queue.

Discussed with:	trociny, glebius
2013-08-19 10:34:10 +00:00
Andre Oppermann
fb86dfcd2f Remove unused M_FRAG, M_FIRSTFRAG and M_LASTFRAG tagging from ip_fragment().
There wasn't any real driver (and hardware) support for it.  Modern hardware
does full fragmentation/segmentation offload instead.
2013-08-19 10:30:15 +00:00
Andre Oppermann
9d1c4ca773 Remove unused and incomplete support for delayed fragment checksums
from bce(4), bxe(4), mge(4) and ti(4) drivers.
2013-08-19 10:20:20 +00:00
Andrew Turner
55d4588b45 Enable VFP on the Arndale Board. 2013-08-19 08:28:35 +00:00
Rui Paulo
ecc2d99765 Style changes and typos fixed. 2013-08-19 05:48:42 +00:00
Peter Wemm
030ee53fa1 Pass pidfile to bsnmpd if it's been changed (parts cut/pasted from
rc.d/rarpd and rc.d/wpa_supplicant)
2013-08-19 05:37:49 +00:00
Peter Wemm
8913b090d0 Revert r254508. 2013-08-19 05:12:38 +00:00
Justin Hibbits
cc117e2773 Fix some ppc64 dtrace bugs, and enable systrace_freebsd32 for ppc64. 2013-08-19 05:10:46 +00:00
Peter Wemm
25180adf0d Add the optional ability to run as a different user.
Obtained from:	Antique freebsd.org cluster archive images
2013-08-19 04:56:03 +00:00
Ian Lepore
87a6a871e2 Allow a hardware driver to pass clock frequencies into the sdhci driver.
The sdhci spec says that if the base or timeout clock frequency in the
capabilities register is zero, the driver must obtain the frequency "from
another source."  This change defines that other source to be the low-level
hardware driver, which can pre-set the frequencies in slot.max_clk and
slot.timeout_clk before calling sdhci_init_slot().

This helps with a growing number of SoCs that have sdhci base clock
frequencies that either won't fit into the range allowed by the number of
bits available in the capabilities register, or the frequency is runtime-
configurable.
2013-08-19 01:29:13 +00:00
Adrian Chadd
bfd3bbdb11 Don't return ENOTSUPP here - the net80211 pluggable ioctl API will treat
this as the final item in the linker set and not try others.

This stopped the fast frames IOCTLs from being called.
2013-08-18 23:40:30 +00:00
Konstantin Belousov
d91f339823 When code from r254064 in pmap_ts_referenced() drops pv lock and
blocks on a pmap lock, pmap_release() might proceed in parallel and
destroy the pmap mutex, since unlocked pv lock allows to remove pv
entry owned by the pmap.

For now, gate the pmap_release() on write-locked pvh_global_lock.
Since pmap_ts_release() does not unlock the global lock,
pmap_release() would not destroy pmap mutex until the
pmap_ts_referenced() finished.  We cannot enter pmap_ts_referenced()
and encounter a pv entry for the destroyed pmap if pmap_release()
passed the global lock gate, since pmap_remove_pages() would finish
earlier.

Reported by:	jeff, pho
Reviewed by:	alc
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
2013-08-18 21:36:22 +00:00
Adrian Chadd
11e0ddb146 Return the correct status if ieee80211_ff_check() consumes the mbuf.
I broke this when converting the net80211 TX path to use if_transmit.
2013-08-18 20:40:13 +00:00
Pawel Jakub Dawidek
50079a51bb Implement fdclosedir(3) function, which is equivalent to the closedir(3)
function, but returns directory file descriptor instead of closing it.

Submitted by:	Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by:	Google Summer of Code 2013
2013-08-18 20:11:34 +00:00