(or loading a dso linked to libthr.so into process which was not
linked against threading library).
- Remove libthr interposers of the libc functions, including
__error(). Instead, functions calls are indirected through the
interposing table, similar to how pthread stubs in libc are already
done. Libc by default points either to syscall trampolines or to
existing libc implementations. On libthr load, libthr rewrites the
pointers to the cancellable implementations already in libthr. The
interposition table is separate from pthreads stubs indirection
table to not pull pthreads stubs into static binaries.
- Postpone the malloc(3) internal mutexes initialization until libthr
is loaded. This avoids recursion between calloc(3) and static
pthread_mutex_t initialization.
- Reinstall signal handlers with wrapper on libthr load. The
_rtld_is_dlopened(3) is used to avoid useless calls to sigaction(2)
when libthr is statically referenced from the main binary.
In the process, fix openat(2), swapcontext(2) and setcontext(2)
interposing. The libc symbols were exported at different versions
than libthr interposers. Export both libc and libthr versions from
libc now, with default set to the higher version from libthr.
Remove unused and disconnected swapcontext(3) userspace implementation
from libc/gen.
No objections from: deischen
Tested by: pho, antoine (exp-run) (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
if not already defined. This allows building libc from outside of
lib/libc using a reach-over makefile.
A typical use-case is to build a standard ILP32 version and a COMPAT32
version in a single iteration by building the COMPAT32 version using a
reach-over makefile.
Obtained from: Juniper Networks, Inc.
I removed functionality not proposed for POSIX in Austin group issue #411.
A man page (my own) and test cases will follow in later commits.
PR: 176233
Submitted by: Jukka Ukkonen
multibyte support[0] and the new functions strenvisx and strsenvisx.
Add MLINKS for vis(3) functions add by this and the initial import from
NetBSD[1].
PR: bin/166364, bin/175418
Submitted by: "J.R. Oldroyd" <fbsd@opal.com>[0]
stefanf[1]
Obtained from: NetBSD
MFC after: 2 weeks
system call, which has a nice property - it never fails, so it is a bit
easier to use. If there is no support for capability mode in the kernel
the function will return false (not in a sandbox). If the kernel is compiled
with the support for capability mode, the function will return true or false
depending if the calling process is in the capability mode sandbox or not
respectively.
Sponsored by: The FreeBSD Foundation
NetBSD's. This output size limited versions of vis and unvis functions
as well as a set of vis variants that allow arbitrary characters to be
specified for encoding.
Finally, MIME Quoted-Printable encoding as described in RFC 2045 is
supported.
This adds two features:
* uid_from_user() and gid_from_group() as the reverse of user_from_uid()
and groups_from_gid().
* pwcache_userdb() and pwcache_groupdb() which allow alternative lookup
functions to be used. For example lookups from passwd and group
databases in a non-standard location.
On Windows, AUX is the auxiliary device, usually pointing to COM1.
Therefore it is forbidden to create a file named aux.c. To make it a bit
easier for Windows users to check out our source code, rename this file
to auxv.c.
MFC after: 1 month
Discussed with: kib
Suggested by: Eric van Gyzen <eric vangyzen net>
Introduce dirfd() libc exported symbol replacing macro with same name,
preserve _dirfd() macro for internal use.
Replace dirp->dd_fd with dirfd() call. Avoid using dirfd as variable
name to prevent shadowing global symbol.
Sponsored by: Google Summer Of Code 2011
Add an API for alerting internal libc routines to the presence of
"unsafe" paths post-chroot, and use it in ftpd. [11:07]
Fix a buffer overflow in telnetd. [11:08]
Make pam_ssh ignore unpassphrased keys unless the "nullok" option is
specified. [11:09]
Add sanity checking of service names in pam_start. [11:10]
Approved by: so (cperciva)
Approved by: re (bz)
Security: FreeBSD-SA-11:06.bind
Security: FreeBSD-SA-11:07.chroot
Security: FreeBSD-SA-11:08.telnetd
Security: FreeBSD-SA-11:09.pam_ssh
Security: FreeBSD-SA-11:10.pam
working MI one. The MI one only needs to be overridden on machines
with non-IEEE754 arithmetic. (The last supported one was the VAX.)
It can also be overridden if someone comes up with a faster one that
actually passes the regression tests -- but this is harder than it sounds.
I've noticed various terminal emulators that need to obtain a sane
default termios structure use very complex `hacks'. Even though POSIX
doesn't provide any functionality for this, extend our termios API with
cfmakesane(3), which is similar to the commonly supported cfmakeraw(3),
except that it fills the termios structure with sane defaults.
Change all code in our base system to use this function, instead of
depending on <sys/ttydefaults.h> to provide TTYDEF_*.
for them, two functions _pthread_cancel_enter and _pthread_cancel_leave
are added to let thread enter and leave a cancellation point, it also
makes it possible that other functions can be cancellation points in
libraries without having to be rewritten in libthr.
their implementations aren't in the same files. Introduce LIBC_ARCH
and use that in preference to MACHINE_CPUARCH. Tested by amd64 and
powerpc64 builds (thanks nathanw@)
atexit and __cxa_atexit handlers that are either installed by unloaded
dso, or points to the functions provided by the dso.
Use _rtld_addr_phdr to locate segment information from the address of
private variable belonging to the dso, supplied by crtstuff.c. Provide
utility function __elf_phdr_match_addr to do the match of address against
dso executable segment.
Call back into libthr from __cxa_finalize using weak
__pthread_cxa_finalize symbol to remove any atfork handler which
function points into unloaded object.
The rtld needs private __pthread_cxa_finalize symbol to not require
resolution of the weak undefined symbol at initialization time. This
cannot work, since rtld is relocated before sym_zero is set up.
Idea by: kan
Reviewed by: kan (previous version)
MFC after: 3 weeks
number of host CPUs and osreldate.
This eliminates the last sysctl(2) calls from the dynamically linked image
startup.
No objections from: kan
Tested by: marius (sparc64)
MFC after: 1 month
Phase out ttyslot(3).
The ttyslot() function was originally part for SUSv1, marked LEGACY in
SUSv2 and removed later on. This function only makes sense when using
utmp(5), because it was used to determine the offset of the record for
the controlling TTY. It makes little sense to keep it here, because the
new utmpx file format doesn't index based on TTY slots.
The utmpx interface is the standardized interface of the user accounting
database. The standard only defines a subset of the functions that were
present in System V-like systems.
I'd like to highlight some of the traits my implementation has:
- The standard allows the on-disk format to be different than the
in-memory representation (struct utmpx). Most operating systems don't
do this, but we do. This allows us to keep our ABI more stable, while
giving us the opportunity to modify the on-disk format. It also allows
us to use a common file format across different architectures (i.e.
byte ordering).
- Our implementation of pututxline() also updates wtmp and lastlog (now
called utx.log and utx.lastlogin). This means the databases are more
likely to be in sync.
- Care must be taken that our implementation discard any fields that are
not applicable. For example, our DEAD_PROCESS records do not hold a
TTY name. Just a time stamp, a record identifier and a process
identifier. It also guarantees that strings (ut_host, ut_line and
ut_user) are null terminated. ut_id is obviously not null terminated,
because it's not a string.
- The API and its behaviour should be conformant to POSIX, but there may
be things that slightly deviate from the standard. This implementation
uses separate file descriptors when writing to the log files. It also
doesn't use getutxid() to search for a field to overwrite. It uses an
allocation strategy similar to getutxid(), but prevents DEAD_PROCESS
records from accumulating.
Make sure libulog doesn't overwrite the manpages shipped with our C
library. Also keep the symbol list in Symbol.map sorted.
I'll bump __FreeBSD_version later this evening. I first want to convert
everything to <utmpx.h> and get rid of <utmp.h>.
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
with the additional property that it is safe for routines in libc to use
in both single-threaded and multi-threaded processes. Multi-threaded
processes use the pthread_once() implementation from the threading library
while single-threaded processes use a simplified "stub" version internal
to libc. The libc stub-version of pthread_once() now also uses the
simplified "stub" version as well instead of being a nop.
Reviewed by: deischen, Matthew Fleming @ Isilon
Suggested by: alc
MFC after: 1 week
The entire world seems to use the non-standard TIOCSCTTY ioctl to make a
TTY a controlling terminal of a session. Even though tcsetsid(3) is also
non-standard, I think it's a lot better to use in our own source code,
mainly because it's similar to tcsetpgrp(), tcgetpgrp() and tcgetsid().
I stole the idea from QNX. They do it the other way around; their
TIOCSCTTY is just a wrapper around tcsetsid(). tcsetsid() then calls
into an IPC framework.
dlfunc() called dlsym() to do the work, and dlsym() determines the dso
that originating the call by the return address. Due to this, dlfunc()
operated as if the caller is always the libc.
To fix this, move the dlfunc() to rtld, where it can call the internal
implementation of dlsym, and still correctly fetch return address.
Provide usual weak stub for the symbol from libc for static binaries.
dlfunc is put to FBSD_1.0 symver namespace in the ld.so export to
override dlfunc@FBSD_1.0 weak symbol, exported by libc.
Reported, analyzed and tested by: Tijl Coosemans <tijl ulyssis org>
PR: standards/133339
Reviewed by: kan
A more elegant way of obtaining a name of a character device by its file
descriptor on FreeBSD, is to use the FIODGNAME ioctl. Because a valid
file descriptor implies a file descriptor is visible in /dev, it will
always resolve a valid device name.
I'm adding a more friendly wrapper for this ioctl, called fdevname(). It
is a lot easier to use than devname() and also has better error
handling. When a device name cannot be resolved, it will just return
NULL instead of a generated device name that makes no sense.
Discussed with: kib
Adding exevpe() has caused some ports to break. Even though execvpe() is
a useful routine, it does not conform to any standards.
This patch is a little bit different from the patch sent to the mailing
list. I forgot to remove execvpe from the Symbol.map (which does not
seem to miscompile libc, though).
Reviewed by: davidxu
Approved by: philip
can be used as replacements for exec/fork in a lot of cases. This
change also added execvpe() which allows environment variable
PATH to be used for searching executable file, it is used for
implementing posix_spawnp().
PR: standards/122051
deals with the usual __opendir2() calls, and the rest part with an interface
translator to expose fdopendir(3) functionality. Manual page was obtained from
kib@'s work for *at(2) system calls.
live in libm, while modf() lives in libc due to historical
mistakes. I'm claiming in the manpage that they all live in libm,
since programmers should not rely on the mistake.
