* Do not hold any locks over calls to copyin/copyout.
* Clean up some #ifdefs
* fix a possible mbuf leak when NAT fails on policy routed packets
PR: 117216
- Select a tag gains ability to optionally save new tags
off in the timewait system.
- When looking up associations do not give back a stcb that
is in the about-to-be-freed state, and instead continue
looking for other candiates.
- New function to query to see if value is in time-wait.
- Timewait had a time comparison error that caused very
few vtags to actually stay in time-wait.
- When setting tags in time-wait, we now use the time
requested NOT a fixed constant value.
- sstat now gets the proper associd when we do the query.
- When we process an association, we expect the tag chosen
(if we have one from a cookie) to be in time-wait. Before
we would NOT allow the assoc up by checking if its good.
In theory this should have caused almost all assoc not
to come up except for the time-comparison bug above (this
bug was hidden by the time comparison bug :-D).
- Don't save tags for nonce values in the time-wait cache
since these are used only during cookie collisions and do
not matter if they are unique or not.
MFC after: 1 week
to tune pthread mutex performance:
1. LIBPTHREAD_SPINLOOPS
If a pthread mutex is being locked by another thread, this environment
variable sets total number of spin loops before the current thread
sleeps in kernel, this saves a syscall overhead if the mutex will be
unlocked very soon (well written application code).
2. LIBPTHREAD_YIELDLOOPS
If a pthread mutex is being locked by other threads, this environment
variable sets total number of sched_yield() loops before the currrent
thread sleeps in kernel. if a pthread mutex is locked, the current thread
gives up cpu, but will not sleep in kernel, this means, current thread
does not set contention bit in mutex, but let lock owner to run again
if the owner is on kernel's run queue, and when lock owner unlocks the
mutex, it does not need to enter kernel and do lots of work to resume
mutex waiters, in some cases, this saves lots of syscall overheads for
mutex owner.
In my practice, sometimes LIBPTHREAD_YIELDLOOPS can massively improve performance
than LIBPTHREAD_SPINLOOPS, this depends on application. These two environments
are global to all pthread mutex, there is no interface to set them for each
pthread mutex, the default values are zero, this means spinning is turned off
by default.
caused a segfault. It turns out that in pre-7.0 systems if you do
getenv("amd_enable=YES") it will return the setting of the environment
variable "amd_enable" but now it returns NULL. I think I found the
places where sysinstall was potentially relying on that old behavior.
Fix is to make a copy of the string to be used for the getenv(3) call,
look for a '=' character in it, and replace it with '\0' if one is
found. Stuck to sysinstall's typical coding standards despite urges
to do otherwise.
PR: 117642
MFC after: 2 days
set this flag and it was more or less just copied and pasted from
another FreeBSD driver while porting this driver from NetBSD, whose
gentbi(4) doesn't set MIIF_NOISOLATE either.
- Fix spelling in a comment.
OK'ed by: yongari
MFC after: 3 months
is also implemented in glibc and is used by a number of existing
applications (mysql, firefox, etc).
This mutex type is a default mutex with the additional property that
it spins briefly when attempting to acquire a contested lock, doing
trylock operations in userland before entering the kernel to block if
eventually unsuccessful.
The expectation is that applications requesting this mutex type know
that the mutex is likely to be only held for very brief periods, so it
is faster to spin in userland and probably succeed in acquiring the
mutex, than to enter the kernel and sleep, only to be woken up almost
immediately. This can help significantly in certain cases when
pthread mutexes are heavily contended and held for brief durations
(such as mysql).
Spin up to 200 times before entering the kernel, which represents only
a few us on modern CPUs. No performance degradation was observed with
this value and it is sufficient to avoid a large performance drop in
mysql performance in the heavily contended pthread mutex case.
The libkse implementation is a NOP.
Reviewed by: jeff
MFC after: 3 days
zero (0). Actual RFCOMM channel will be assigned after listen(2)
call is done on a RFCOMM socket bound to a ''wildcard'' RFCOMM
channel zero (0).
Address locking issues in ng_btsocket_rfcomm_bind()
Submitted by: Heiko Wundram (Beenic) < wundram at beenic dot net >
MFC after: 1 week
- Remove AU_.* hard-coded audit class constants, as udit classes are now
entirely dynamically configured using /etc/security/audit_class.
Obtained from: TrustedBSD Project
since the last import:
OpenBSM 1.0
- Fix bug in auditreduce(8) which resulted in a memory fault/crash when
the user specified an event name with -m.
- Remove AU_.* hard-coded audit class constants, as udit classes are now
entirely dynamically configured using /etc/security/audit_class.
MFC after: 3 days
Obtained from: TrustedBSD Project
supports the removal of hard-coded audit class constants in OpenBSM
1.0. All audit classes are now dynamically configured via the
audit_class database.
Obtained from: TrustedBSD Project
changes:
01 - Enhanced LRO:
LRO feature is extended to support multi-buffer mode. Previously,
Ethernet frames received in contiguous buffers were offloaded.
Now, frames received in multiple non-contiguous buffers can be
offloaded, as well. The driver now supports LRO for jumbo frames.
02 - Locks Optimization:
The driver code was re-organized to limit the use of locks.
Moreover, lock contention was reduced by replacing wait locks
with try locks.
03 - Code Optimization:
The driver code was re-factored to eliminate some memcpy
operations. Fast path loops were optimized.
04 - Tag Creations:
Physical Buffer Tags are now optimized based upon frame size.
For better performance, Physical Memory Maps are now re-used.
05 - Configuration:
Features such as TSO, LRO, and Interrupt Mode can be configured
either at load or at run time. Rx buffer mode (mode 1 or mode 2)
can be configured at load time through kenv.
06 - Driver Statistics:
Run time statistics are enhanced to provide better visibility
into the driver performance.
07 - Bug Fixes:
The driver contains fixes for the problems discovered and
reported since last submission.
08 - MSI support:
Added Message Signaled Interrupt feature which currently uses 1
message.
09 Removed feature:
Rx 3 buffer mode feature has been removed. Driver now supports 1,
2 and 5 buffer modes of which 2 and 5 buffer modes can be used
for header separation.
10 Compiler warning:
Fixed compiler warning when compiled for 32 bit system.
11 Copyright notice:
Source files are updated with the proper copyright notice.
MFC after: 3 days
Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>,
Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
it's just a matter of adding a `${_+_}' prefix before each submake
invokation. This allows a dry run to proceed down to, but not
including, leaf commands. (See <sys.mk> for how ${_+_} is set
depending on the number of -n flags.)
made by Michael Eisele and the patch was slightly modified by me.
With this change several NVIDIA ethernet controllers(e.g. MCP61)
works.
RTL8211B(L) is RealTek's new gigabit PHY. The PHY has several
features including crossover correction, polarity correction as
well as supporting triple speed(10/100/1000bps). Data transfer
between MAC and PHY is via RGMII for 1000baseT, MII for
10baseT/100baseTX.
Unfortunately, RealTek used the same model number for RTL8211B(L)
PHY so there is no way to discriminate between RTL8211B(L) and its
predecessors. ATM RTL8211B uses revision number 2 so checking the
revision number seems to be only way to identify it.
Obtained from: Michael Eisele [1]
Tested by: clemens fischer < ino-qc AT spotteswoode DOT de DOT eu DOT org >
mii_anegticks to MII_ANEGTICKS_GIGE and use it. Previously it used
to MII_ANEGTICKS which may not be enough to wait before retrying
autonegotiation process at 1000bps.
o Reset autonegotation timer if media option is not IFM_AUTO or we
got a valid link.
o Announce link loss right after it happends.
o Autonegiation is retried every mii_anegticks seconds.
o Report link state changes right after setting autonegotiation.
command would add incorrect routing entries if network numbers weren't
fully "spelled" out according to their class. For example:
# route add 128.0/16 (works)
# route add 128/16 (doesn't work)
# route add 193.0.0/24 (works)
# route add 193/24 (doesn't work)
Also, rework the way a netmask is deduced from network number if
it [netmask] is not specified.
Submitted by: Nuno Antunes <nuno.antunes@gmail.com> (mostly)
MFC after: 1 week
Blade 1500/SX1500 boards have inherited the firmware bug of the
AX1105 mainboards to not include an interrupt map entry for the
parallel port controller (for the AX1105 the heuristic code for
E450s probably erroneously kicks in and guesses an interrupt).
- Take advantage of bus_generic_setup_intr(9).
- Fix some whitespace bugs.
