attempt to read memory when siz is 0
- Clarify comments referring to strlcat() usage
PR: 24278, 24295
Submitted by: Tony Finch <dot@dotat.at>
Richard Kettlewell <rjk@greenend.org.uk>
Reviewed by: -audit
active memory maps. This removes the need to change the memory
map from common to attribute every time a packet is sent/received.
This increases performance and decreases cpu load (ping times on
slow machines improve by about 1.5ms).
Move out the old common memory/attrbiute memory hack functions to a
new header file to tidy up the main code. I want to keep them available
for a while.
non-386 atomic_load_acq(). %eax is an input since its value is used in
the cmpxchg instruction, but we don't care what value it is, so setting
it to a specific value is just wasteful. Thus, it is being used without
being initialized as the warning stated, but it is ok for it to be used
because its value isn't important. Thus, we are only sort of lying when
we say it is an output only operand.
- Add "cc" to the clobber list for atomic_load_acq() since the cmpxchgl
changes ZF.
slow enough as it is, without having to constantly check that it really
is an i386 still. It was possible to compile out the conditionals for
faster cpus by leaving out 'I386_CPU', but it was not possible to
unconditionally compile for the i386. You got the runtime checking whether
you wanted it or not. This makes I386_CPU mutually exclusive with the
other cpu types, and tidies things up a little in the process.
Reviewed by: alfred, markm, phk, benno, jlemon, jhb, jake, grog, msmith,
jasone, dcs, des (and a bunch more people who encouraged it)
compiling errors where gcc would run out of registers.
- Add "cc" to the list of clobbers for micro-ops where we perform
instructions that alter %eflags.
- Use xchgl instead of cmpxchgl to release a spin lock. This could allow
for more efficient register allocation as we no longer mandate that %eax
be used.
- Reenable the optimized mutex micro-ops in the non-i386 case.
allocation routines are being called safely. Since we drop our relevant
mbuf mutex and acquire Giant before we call kmem_malloc(), we have
to make sure that this does not pave the way for a fatal lock order
reversal. Check that either Giant is already held (in which case it's safe
to grab it again and recurse on it) or, if Giant is not held, that no
other locks are held before we try to acquire Giant.
Similarily, add a KASSERT valid in the WITNESS case in m_reclaim() to
nail callers who end up in m_reclaim() and hold a lock.
Pointed out by: jhb
we *really* are.
It should be noted that there is a degenerate case where soft tape
location will be lost (not causing a frozen state- but causing
the loss of reporting fileno/blockno)- that's where you backspace
over a filemark- you stop backspacing as soon as you cross the
filemark, but you have no idea what the record number now is because
you have no idea how many records you are into the file you just
backed into. Such is life.
While I'm at it, also pick up residuals from writing filemarks.
PR: 24222
that modules can call.
- Remove the old gcc <= 2.8 versions of the atomic ops.
- Resort the order of some things in the file so that there is only
one #ifdef for KLD_MODULE, and so that all WANT_FUNCTIONS stuff is
moved to the bottom of the file.
- Remove ATOMIC_ACQ_REL() and just use explicit macros instead.
only CCB type but also extra flags- one of which can be "position
updated".
In other changes: Add in a SA_QUIRK_NO_CPAGE quirk so that it's possible
to avoid using a (broken) device's implementation of he DEVICE COMPRESSION
page.
Also do a couple of printout cleanups.
As per some discussion on FreeBSD-scsi, skip doing tape flushing
if we're reading tape logical block location (MTIOCRDSPOS).
(so we can see rapidly whether something was a fabric device but is
now gone).
Add a tag which says what role this adapter should take. It can take
on the value of None, Target, Initiator or Both. None is useful for
warm failover purposes. Remove the ISP_CFG_NOINIT silliness since
a role of "None" does this.
Add a isp_lastmbxcmd tag to store the opcode for the last mailbox
command used.
Module) and FBM (Fibre Buffer Modules). Also remember to clear the
semaphore registers. Tell the RISC processor to not halt on FPM
parity errors.
Throw out the ISP_CFG_NOINIT silliness and instead go to the use of
adapter 'roles' to see whether one completes initialization or not
(mostly for Fibre Channel). The ultimate intent, btw, of all of this
is to have a warm standby adapter for failover reasons. Because
we do roles now, setting of Target Capable Class 3 service parameters
in the ICB for the 2x00 cards reflects from role. Also, in isp_start,
if we're not supporting an initiator role, we bounce outgoing commands
with a Selection Timeout error. Also clean out the TOGGLE_TMODE
goop for FC- there is no toggling of target mode like there is
for parallel SCSI cards.
Do more cleanup with respect to using target ids 0..125 in F-port
topologies. Also keep track of things which *were* fabric devices
so that when you rescan the fabric you can notify the outer layers
when fabric devices go away.
Only force a LOGOUT for fabric devices if they're still logged in
(i.e., you cat their Port Database entry. Clean up the Get All Next
scanning.
Finally, use a new tag in the softc to store the opcode for the
last mailbox command used so we can report which opcode timed
out.
in-core pointers to summary information. An array in this region
(fs_csp) could overflow on filesystems with a very large number of
cylinder groups (~16000 on i386 with 8k blocks). When this happens,
other fields in the superblock get corrupted, and fsck refuses to
check the filesystem.
Solve this problem by replacing the fs_csp array in 'struct fs'
with a single pointer, and add padding to keep the length of the
128-byte region fixed. Update the kernel and userland utilities
to use just this single pointer.
With this change, the kernel no longer makes use of the superblock
fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c
to indicate that these fields must be calculated for compatibility
with older kernels.
Reviewed by: mckusick
broken the handling of uncompressed VJ packets. The attached diff should
hopefully fix that.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: Sergio de Souza Prallon <prallon@tmp.com.br>
time I tinkered around here. Since INTREN is called from the interrupt
critical path now, it should not be too expensive. In this case, we
look at the bits being changed to decide which 8 bit IO port to write to
rather than unconditionally writing to both. I could probably have gone
further and only done the write if the bits actually changed, but that
seemed overkill for the usual case in interrupt threads.
[an outb is rather expensive when it has to cross the ISA bus]
