Previous code supported only "continuous" code without any kind of
branch instructions. To change that, new function was implemented
which parses current instruction and returns an addres where
the jump might happen (alternative addr).
mdthread structure was extended to support two breakpoints
(one directly below current instruction and the second placed
at the alternative location).
One of them must trigger regardless the instruction has or has not been
executed due to condition field.
Upon cleanup, both software breakpoints are removed.
This implementation parses only the most common instructions
that are present in the code (like 99.99% of all), but there
is a chance there are some left, not covered by the parsing routine.
Parsing is done only for 32-bit instruction, no Thumb nor Thumb-2
support is provided.
Reviewed by: kib
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4021
Verify the filesystem type using dumpfs. Add preliminary support
for NetBSD (needs to be validated)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Parameterize the mtree keywords as $DEFAULT_MTREE_KEYWORDS
- Test with the extra mtree keywords, `mode,gid,uid`.
- Add a note about mtrees with time support not working with makefs right now
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
-- -o isolevel=1 currently fails because of path comparison issues,
so mark it as an expected failure.
-- -o isolevel=3 is not implemented, so expect it to fail as an out
of bounds value [*].
PR: 203645
MFC after: 1 week
X-MFC with: r290264
Sponsored by: EMC / Isilon Storage Division
dereferencing a NULL function pointer
Add some asserts to ensure that isolevel is always either 1 or 2.
PR: 203645
Reported by: Thomas Schmitt <scdbackup@gmx.net>
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Note which options have been implemented and which options haven't
been implemented
Submitted as the following NetBSD PRs: bin/50390 and bin/50392
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
I discovered that we're logging each trap, which gets pretty spendy;
and there wasn't any further information on the pid/tid/progname involved.
I originally noticed this because I don't attach anything to /dev/log and so
the log() output stays going to the kernel. That's an oops on my part, but
I'm glad I did it.
This commit adds the following:
* a rate limiter, which could do with some eyeballs/ideas on how to
make it more predictable on SMP;
* log pid, tid, progname (comm) as part of the output.
I now get output like this:
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a10055
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a10051
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a1004d
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401159
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401155
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401151
.. which makes it much easier to start figuring out what/where to fix.
The pc looks suss (it looks like it's in kernel space); I'll dig into that one next.
Tested:
* AR9331 SoC (Carambola2)
The command was checking local/remote system uptime, so rename the script to
match its function and to avoid confusion
The controlling variable in /etc/periodic.conf has been renamed from
daily_status_rwho_enable to daily_status_uptime_enable.
MFC after: 3 days
Reported by: Peter Jeremy <peter@rulingia.com>
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
MK_USB != no
Add the manpages to OptionalObsoleteFiles.inc
As a side-effect, this also fixes installworld with MK_USB == no
X-MFC with: r290128
Sponsored by: EMC / Isilon Storage Division
In pfctl_set_debug() we used 'level' without ever initialising it.
We correctly parsed the option, but them failed to actually assign the parsed
value to 'level' before performing to ioctl() to configure the debug level.
PR: 202996
Submitted by: Andrej Kolontai
Certain invalid operations trigger hardware error conditions. Error
conditions that only halt one channel can be detected and recovered by
resetting the channel. Error conditions that halt the whole device are
generally not recoverable.
Add a sysctl to inject channel-fatal HW errors,
'dev.ioat.<N>.force_hw_error=1'.
When a halt due to a channel error is detected, ioat(4) blocks new
operations from being queued on the channel, completes any outstanding
operations with an error status, and resets the channel before allowing
new operations to be queued again.
Update ioat.4 to document error recovery; document blockfill introduced
in r290021 while we are here; document ioat_put_dmaengine() added in
r289907; document DMA_NO_WAIT added in r289982.
Sponsored by: EMC / Isilon Storage Division
When -C was introduced in r114137 the plan was to have -C and -c being used for
"create" due to a typo in FreeBSD <= 4.8 a temporary compatibility hack has been
added to make -c being like -G aka GLOB and a warning was issued for the user to
be aware of the futur change for -c.
12 years later it is more than time to remove that hack and finish the what was
intent in r114137
Submitted by: Alexandre Perrin <alex@kaworu.ch>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4000
whether an error is recoverable. Always re-dirty the buffer on errors
from write requests. The invalidation we used to do for errors not EIO
doesn't need to be done for a device that's really gone, since that's
done in a different path.
Reviewed by: mckusick@, kib@
This can have important debugging information such as 'cc: not found' or
'ccache: error: Could not find compiler "cc" in PATH'.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
mips24k/mips74k document that we need an explicit SYNC so to order
things correctly, even with access to uncachable memory.
We were doing calls to SYNC in the cache ops (inv, wbinv) but we
weren't doing it for uncachable memory.
When I ported this code from netbsd I was .. slightly mips74k greener.
I used writethrough because (a) it's what netbsd did, and (b) if I used
writethrough then things "didn't work."
Fast-forward a couple years, more MIPS hacking and a whole lot more
understanding of the bus APIs (the last few commits notwithstanding;
it's been a long week, ok?) and I have this working for arge,
argemdio, spi and ath. Hans has it working for USB. The ath barrier
code will come in a later commit.
This gets the routing throughput up from 220mbit -> 337mbit.
I'm sure the bridging throughput will be similarly improved.
Tested:
* QCA955x SoC, routing workload.
* use barriers in a slightly better fashion. You can blame this
glass of whiskey on putting barriers in the wrong spot. Grr adrian.
* steal/rewrite the mdio busy check from ag7100 from openwrt and
refactor the existing code out. This is .. more correct.
This seems to fix the boot-to-boot variation that I've been seeing
and it quietens the switch port status flapping.
Tested:
* QCA9558 SoC (AP135.)
Obtained from: Linux OpenWRT
This driver and the linux ag71xx driver both treat the transmit ring
as a circular linked list of descriptors. There's no "end" pointer
that is ever NULL - instead, it expects the MAC to hit a finished
descriptor (ARGE_DESC_EMPTY) and stop.
Now, since it's a circular buffer, we may end up with the hardware
hitting the beginning of our multi-descriptor frame before we've finished
setting it up. It then DMA's it in, starts sending it, and we finish
writing out the new descriptor. The hardware may then write its
completion for the next descriptor out; then we do, and when we next
read it it'll show up as "not done" and transmit completion stops.
This unfortunately manifests itself as the transmit queue always
being active and a massive TX interrupt storm. We need to actively
ACK packets back from the transmit engine and if we don't (eg because
we think the transmit isn't finished but it is) then the unit will
just keep generating interrupts.
I hit this finally with the below testing setup. This fixed it for me.
Strictly speaking I should put in a sync in between writing out all of
the descriptors and writing out that final descriptor.
Tested:
* QCA9558 SoC (AP135 reference board) w/ arge1 + vlans acting as a
router, and iperf -d (tcp, bidirectional traffic.)
Obtained from: Linux OpenWRT (ag71xx_main.c.)
The MIPS busdma sync operations currently are a big no-op on coherent memory.
This isn't strictly correct behaviour as we need a SYNC in here to ensure that
the writes have finished and are visible in main memory before the MMIO accesses
occur. This will have to be addressed in a later commit.
But, before that happens, let's at least do a flush here to make things
more "correct".
This is required for even remotely sensible behaviour on mips74k with
write-through memory enabled.
The mips74k programmers guide notes that reads can be re-ordered, even
uncached ones, so we need an explicit SYNC between them.
Yes, this is a case of a driver author actively doing a bus barrier
operation.
This ends up being necessary when the mips74k core is run in write-back
mode rather than write-through mode. That's coming in an upcoming
commit.
Tested:
* mips74k, QCA9558 SoC (AP135 reference board), arge<->arge interface
routing traffic tests.
