Mike Pritchard
b805452cc8
A *QUICK* pass through this man page to make it conform to mdoc
...
standards and to clean up some of the English. The job is
nowhere complete.
This man page would be a good project for someone who knows
something about the firewall software, and would like to
contribute to the documentation effort. Many of the things
in this man page are out of date and do not reflect reality.
1996-07-11 02:37:59 +00:00
Mike Pritchard
09b4b08649
Fix some spelling errors.
1996-07-11 02:08:31 +00:00
Mike Pritchard
adcdb5c26b
Add divert.4 to the list of man pages that are installed.
1996-07-11 01:52:46 +00:00
Mike Pritchard
836760b9f4
Fix a spelling error.
1996-07-11 01:20:45 +00:00
Mike Pritchard
7ed2691105
Add a man page for the "aic" deive (Adaptec AIC 6260/6360 SCSI controller
...
chips).
Obtained from: NetBSD
1996-07-11 01:11:12 +00:00
Mike Pritchard
69bf862ef8
Add a man page for the "wt" device (Archive/Wangtec QIC-02 & QIC-36
...
interface boards).
Submitted by: NetBSD
1996-07-11 00:37:13 +00:00
Mike Pritchard
ae828f7be5
Minor style fixup.
1996-07-11 00:31:57 +00:00
Mike Pritchard
0ee08fdda0
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers).
...
Obtained from: NetBSD
1996-07-11 00:30:51 +00:00
Mike Pritchard
f1bf0d576f
Add a man page for the "ep" device (3com 3c5x9 ethernet card).
...
Obtained from: NetBSD
1996-07-11 00:22:46 +00:00
Mike Pritchard
e165a77b17
Add a man page for the "el" device (3com 3c501 ethernet card).
...
Obtained from: NetBSD
1996-07-11 00:19:22 +00:00
Mike Pritchard
61ab736492
Add a man page for the "eg" device (3com 3c505).
...
Obtained from: NetBSD
1996-07-11 00:16:46 +00:00
Mike Pritchard
39d5249727
Fix a minor formatting problem.
1996-07-10 23:54:15 +00:00
Julian Elischer
93e0e11657
Adding changes to ipfw and the kernel to support ip packet diversion..
...
This stuff should not be too destructive if the IPDIVERT is not compiled in..
be aware that this changes the size of the ip_fw struct
so ipfw needs to be recompiled to use it.. more changes coming to clean this up.
1996-07-10 19:44:30 +00:00
Wolfram Schneider
090d3c2832
fix `make install' for subdirs (man4.i386, man8.i386)
...
which I broke in rev 1.21
detected by: bde & jhay@mikom.csir.co.za
1996-07-08 17:44:31 +00:00
Wolfram Schneider
e4b7c2713b
add 'speaker' to section NAME
...
add spkrtest(8) to section SEE ALSO
1996-07-07 12:52:03 +00:00
John Hay
129db146f7
Add the sr.4 man page so that it gets installed.
1996-07-06 08:03:18 +00:00
John Hay
d805b866fa
This driver supports the SDL Communications RISCom/N2 ISA cards that is
...
based on the HD64570 chip. Both the 1 and 2 port cards is supported.
Line speeds of up to 2Mbps is possible. At this speed about 95% of the
bandwidth is usable with 486DX processors.
The standard FreeBSD sppp code is used for the link level layer. The
default protocol used is PPP. The Cisco HDLC protocol can be used by
adding "link2" to the ifconfig line in /etc/sysconfig or where ever
ifconfig is run.
At the moment only the X.21 interface is tested. The others may need
tweaks to the clock selection code.
1996-07-05 18:51:59 +00:00
Wolfram Schneider
6541e32dc2
add manpage link speaker.4 -> spkr.4
1996-07-04 22:54:14 +00:00
Mike Pritchard
41aa7251bb
Link the pcvt.4 man page to vt.4 so that anyone examining
...
their kernel configuration file can do "man vt" and get
what they expect.
1996-07-04 00:42:09 +00:00
Mike Pritchard
dc987e4d24
Update the FILES section to reflect the actual range
...
of ptys that are available.
Submitted by: Matthew N. Dodd
1996-07-03 03:07:03 +00:00
Jordan K. Hubbard
cd9a2f5c28
Bring in my changes for removing the pestilent obj links (unless you
...
really want them) from /usr/src. This is the final version of the
patches, incorporating the feedback I've received from -current.
1996-06-24 04:26:21 +00:00
Joerg Wunsch
bc22cd5f9b
Update the BUGS section, now that we've got some experience in using
...
this driver.
1996-06-23 18:27:12 +00:00
Mike Pritchard
7994d1fef8
Mention that the default update time of 30 seconds may be
...
changed with sysctl(8) by changing the kern.update variable.
Also make a couple of minor cosmetic changes.
1996-05-31 21:02:16 +00:00
Wolfram Schneider
e413a1d50e
`make maninstall' should go down into the subdirs like
...
`make install' does.
1996-05-29 01:10:10 +00:00
Mike Pritchard
2cfb684726
Remove an xref to config.old(8).
1996-05-20 22:46:22 +00:00
Satoshi Asami
cdca955f69
Connect ccd man page and ccdconfig to parent Makefiles.
...
Ok'd by: peter
1996-05-04 08:30:22 +00:00
Justin T. Gibbs
9591b63489
Bring back the AHC_TAGENABLE compile option and document it. You must
...
use this option to get tagged queuing. Just like the old days.
1996-04-28 19:43:10 +00:00
Justin T. Gibbs
6ab36e711a
Update to face reality. We now support the aic7850, aic7860 and aic7880.
...
Mention Ultra support and SCB paging.
Remove references to AHC_TAGENABLE.
1996-04-20 21:37:49 +00:00
Mike Pritchard
e40f3f85d4
Do not install the now unsupported netns and netiso
...
related man pages. Comment out cross references to those man
pages from other man pages.
1996-04-08 05:15:09 +00:00
Mike Pritchard
edf0e5b3f8
Correct some man page xrefs, and some other minor changes to bring some
...
man pages up to mdoc guidelines and fix some minor formatting glitches.
Also fixed a number of man pages to not abuse the .Xr macro to
display functions and path names and a lot of other junk.
1996-04-08 04:18:31 +00:00
Mike Pritchard
8c10c7dd2e
Update the scd(4) man page to reflect the current copyright
...
status and to update some path references.
1996-04-08 01:08:24 +00:00
Mike Pritchard
c4a856d3a0
Add a zero(4) man page to describe /dev/zero. Update null(4) to xref
...
this new man page.
1996-04-07 10:04:49 +00:00
Mike Pritchard
906c1e27fc
Correct some man page cross references and file location references.
1996-04-07 00:06:21 +00:00
Garrett Wollman
ec71082a3e
Add /usr/share/examples/perfmon and /usr/include/machine/perfmon.h to
...
the FILES section.
1996-04-01 19:29:56 +00:00
Garrett Wollman
38544b49e7
Document the change in how the START and STOP ioctls operate
...
(counters can be started and stopped in numerical order brather
than all at once).
1996-03-28 20:57:11 +00:00
Garrett Wollman
986dd77360
Add a man page for the perfmon driver.
1996-03-26 20:57:26 +00:00
Jordan K. Hubbard
2ced21c71d
Whoops, it might be nice if we actually *installed* the vx man page.
...
Noticed by: Juha Inkari <inkari@snakemail.hut.fi>
1996-03-21 00:20:52 +00:00
Nate Williams
54e1baed9c
"options APM" is no longer necessary for APM support.
1996-03-19 04:19:30 +00:00
Jordan K. Hubbard
1160de3203
Whoops, don't forget the man page that goes with the previous commit.
...
Submitted-by: M. Sekiguchi <seki@sysrap.cs.fujitsu.co.jp>
1996-03-17 11:44:22 +00:00
Poul-Henning Kamp
56f799e90c
Manpage on the "Laplink" TCP/IP support.
...
Reviewed by: phk
Submitted by: Andrew.Gordon@net-tel.co.uk
1996-03-05 16:49:57 +00:00
Peter Wemm
7ee32b9fba
Attempt to document the recent in_pcb local port address changes..
1996-02-23 21:01:35 +00:00
Mike Pritchard
4abbfcd7ec
Document the new ".Fx" macro in the mdoc man pages. I also
...
changed the update(4) man page to use this new macro just to
have something to test it on.
1996-02-12 19:27:32 +00:00
Mike Pritchard
c2466934db
Added an i386/FreeBSD specific mtio(4) man page, adapted from the
...
Lite-2 vax version.
1996-02-12 06:25:31 +00:00
Mike Pritchard
4bd9ba3c2f
Fixed some minor formatting problems to silence manck some more.
...
Corrected some bogus cross references to man pages that we don't/won't
have and either deleted them, or found a more appropriate man page
that we do have. Various other minor changes to silence manck.
Manck is currently down to about 200 lines of errors, down from
the 500 - 600+ when I started all this.
1996-02-12 01:20:38 +00:00
Mike Pritchard
3656c5f4df
Added a update(4) man page to describe the kernel initiated update
...
process and changed all of the old references to update(8) to update(4).
1996-02-12 00:45:47 +00:00
Mike Pritchard
78b0b234eb
Correct a bunch of man page cross references and generally
...
try and silence "manck".
ncurses, rpc, and some of the gnu stuff are still a big mess, however.
1996-02-11 22:38:05 +00:00
Mike Pritchard
c4c23c4df8
Another round of various man page cleanups.
1996-02-09 17:25:57 +00:00
Mike Pritchard
6fad16fd59
Add some missing MLINKS, correct some cross references, correct some
...
file locations and some minor formatting/style problems.
1996-02-09 16:20:10 +00:00
Mike Pritchard
7cdd64468f
Link some man pages from man*/i386/xxx to man*/xxx so that you
...
can actually look at them.
1996-02-08 20:32:45 +00:00
Mike Pritchard
98375367d2
I forgot to move gsc.4 to the correct makefile after
...
moving it from man4 to man4/man4.i386. Pointed out by bde again.
1996-02-06 14:53:31 +00:00
Mike Pritchard
7c01530e9f
gsc.4 should reside in share/man/man4.i386 not share/man4.
...
Pointed out by bde.
1996-02-05 17:20:36 +00:00
Paul Traina
6cb84f00df
Document ability to skip auto-probe
1996-02-04 10:08:24 +00:00
Paul Traina
a74f01ce5e
Add qcam.4 to directory, was only mlinking
1996-02-03 07:43:21 +00:00
Paul Traina
869fc587ed
Add support for Connectix QuickCam(tm)
1996-02-02 19:25:24 +00:00
Mike Pritchard
ad27caee81
Added missing gsc(4) (Genius scanner related man page).
1996-02-02 18:12:12 +00:00
Mike Pritchard
4a8d02835c
Fix a bunch of spelling errors in a bunch of man pages.
1996-01-30 13:52:50 +00:00
Jordan K. Hubbard
2ed427b0ad
Man page for the vx driver.
...
Submitted by: Frederick Earl Gray <fgray@owlnet.rice.edu>
1996-01-28 20:33:44 +00:00
Joerg Wunsch
ba73e90d8b
Totally revamp the man page. (Gack, i didn't even know Peter
...
had already written one. :)
1996-01-27 17:55:54 +00:00
Bruce Evans
196fdc3f96
Install intro.4, pt.4 and worm.4.
...
I tried using `MAN4!= *.4' but it did weird things for plain make
although it handled the long overlooked pt.4 and worm.4 better than
the old manually edited list.
1996-01-21 18:43:45 +00:00
Joerg Wunsch
f00e21badf
Add intro(4), as it's being referenced from severall other pages.
...
Closes PR # docs/947: missing intro(4) manpage
Submitted by: David E. O'Brien (initial version)
1996-01-21 14:01:49 +00:00
Garrett Wollman
4b07d06bca
More man page cleanups.
1996-01-19 22:17:57 +00:00
Garrett Wollman
d400d99c36
Correct some formatting problems pointed out by bde.
1996-01-19 19:58:33 +00:00
Garrett Wollman
250ccd4a24
The is driver has been superseded by the lnc driver, so don't install
...
the is.4 man page.
1996-01-18 21:53:08 +00:00
Garrett Wollman
35fe659d58
Use -mdoc properly.
...
Delete lots of out-of-date text.
Write new text to replace some of the old text. BDE will need to inspect
the results for accuracy.
1996-01-18 21:36:18 +00:00
Garrett Wollman
feff7a1342
Update to reflect reality, and slightly better formatting.
1996-01-18 21:33:42 +00:00
Garrett Wollman
89533cd9d7
Use -mdoc macros correctly. st(4) still needs work.
1996-01-17 21:57:57 +00:00
Garrett Wollman
86bd302f00
Update and clean up.
1996-01-17 21:07:38 +00:00
Garrett Wollman
68bf4c9ec0
Clean up and translate to -mdoc.
1996-01-17 21:07:02 +00:00
Garrett Wollman
5fc1fd7078
Update to reflect the reality of the header files.
...
Make more effective use of -mdoc.
1996-01-16 21:29:43 +00:00
Garrett Wollman
c873a20005
Translate to -mdoc.
1996-01-16 20:01:05 +00:00
Garrett Wollman
04ecd93b2a
Correct reference to tcpdump. Someone should redo this page to use
...
mdoc macros.
1996-01-14 19:37:48 +00:00
Bruce Evans
13fd2edc0c
Added io.4.
1996-01-01 16:54:34 +00:00
Joerg Wunsch
03897e52bd
Document the /dev/io security hole.
1996-01-01 11:01:13 +00:00
Peter Wemm
a5b996a7ec
recording cvs-1.6 file death
1995-12-30 19:02:48 +00:00
Bruce Evans
768fd661e4
Added support for the Hayes ESP serial card.
...
Submitted by: Sean Eric Fagan (sef@kithrup.com )
Based on code by John Vinopal (banshee@resort.com )
Cosmetic (I hope) changes by me (bde).
1995-12-29 12:51:32 +00:00
Peter Wemm
1c6923286c
A couple more updates to the man page..
...
1: the eisa code has not been updated to the 'new style' code yet
2: recieve buffer flushing is now implemented.
1995-12-29 01:39:06 +00:00
Adam David
47487d4e61
some lines were repeated, spuriously
1995-12-28 21:47:58 +00:00
Satoshi Asami
edc3aeecad
ccd.c and ccd.4 from NetBSD-current circa 12/25/95.
1995-12-27 10:49:19 +00:00
Satoshi Asami
9919b89437
This commit was generated by cvs2svn to compensate for changes in r13041,
...
which included commits to RCS files with non-trunk default branches.
1995-12-27 10:49:19 +00:00
Andreas Schulz
9854294554
Delete the obsolete reference to st(1) in the SEE ALSO section.
...
The st(1) command is long ago merged in mt(1).
1995-12-26 04:05:19 +00:00
Jean-Marc Zucconi
dc15257b81
ioctl() args are JOY_SETTIMEOUT and JOY_GETTIMEOUT (only 1 underscore)
1995-12-09 17:31:08 +00:00
Peter Wemm
10459e8c10
Link up John Hay's ar(4) man page..
...
This shouldn't conflict with ar(1) because of the search order...
1995-11-21 04:02:37 +00:00
Peter Wemm
fbe98235bb
Man page for the Arnet driver..
1995-11-21 03:07:26 +00:00
Jordan K. Hubbard
eeca7892a6
Fix some spelling errors and refer to st0 and st1' rather than
cd0 and cd1'
...
in places (whoops!).
Submitted by: John Lind <john@starfire.mn.org>
1995-11-05 23:01:18 +00:00
Paul Traina
290b1ca54e
Close out kern/46.
...
Make documentation match reality. -link2 is used to switch ports on 3COM
cards.
1995-10-28 22:47:12 +00:00
Peter Dufault
6014174c34
Add entries for labpc.4, nca.4, scd.4, and sea.4 to the
...
Makefile so that they are installed. The man pages are already
present.
1995-10-28 13:27:51 +00:00
Jordan K. Hubbard
733972332a
Sync with version 1(26).
...
Submitted by: Frank Durda IV <uhclem@fw.ast.com>
1995-10-25 16:47:54 +00:00
Torsten Blum
7395d17b1b
fix a typo (IFNAMSIZE -> IFNAMSIZ)
...
Obtained from: the NetBSD bugs mailinglist
1995-10-23 00:46:07 +00:00
Bruce Evans
9123d7efcf
Add a man page for the dgb driver.
...
Submitted by: "Serge A. Babkin" <babkin@hq.icb.chel.su>
(English improved a bit by me.)
1995-10-17 17:38:42 +00:00
Bruce Evans
ffbec4beb2
Oops, cvs add a man page for the cy driver.
1995-10-10 09:34:21 +00:00
Bruce Evans
09ea812adf
Disable the documentation about a disabled feature.
...
Fix extra and missing blank lines.
1995-10-10 03:43:10 +00:00
Bruce Evans
ba5a3a397c
Add a man page for the cy driver.
1995-10-10 03:35:25 +00:00
Bruce Evans
2b326c58f6
Install si.4. Only the link to it was (unsuccessfully) installed.
1995-09-28 17:44:40 +00:00
Jordan K. Hubbard
88a4ccb902
Doc latest matcd changes.
...
Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-09-28 13:16:46 +00:00
Peter Wemm
453361157f
Add and enable a man page for si(4) - the specialix serial driver..
...
I couldn't use the original, as it had unusable copyright on the manpage..
(now that must be a first.. the source copyright was fine, the manpage
was not..)
1995-09-26 18:23:38 +00:00
Jean-Marc Zucconi
5b72f15a01
Add technical specifications, and give the pinout of the game port
...
Submitted by: Joe Greco <jgreco@brasil.moneng.mei.com>
1995-09-16 16:29:16 +00:00
Julian Elischer
a47380a6d4
Submitted by: -Luigi Rizzo (luigi@iet.unipi.it)
...
Obtained from: Luigi Rizzo and Gunther Schadow
man page for the asc scanner driver
1995-09-08 03:10:51 +00:00
Jordan K. Hubbard
9372029d93
Move and properly add in man page for Matrox Meteor driver.
...
Submitted by: james
1995-09-06 03:34:52 +00:00
Bill Paul
0c31984940
Update this man page to reflect reality.
1995-09-02 04:20:01 +00:00
Jordan K. Hubbard
f5de4fdbaf
Man page for Matrox meteor.
...
Submitted by: Mark Tinguely <tinguely@plains.nodak.edu> and Jim Lowe <james>
1995-08-28 17:08:26 +00:00
Justin T. Gibbs
31acd246c0
Allow the specification of the controller bus when wiring down scsi buses.
...
This is performed by using a line similar to:
controller scbus0 at ahc0 bus 1
to wire scbus0 to the second bus on an adaptec 2742T controller.
Reviewed by: Peter Dufault(dufault@hda.com ), Rod Grimes(rgrimes@FreeBSD.org )
1995-07-17 23:38:16 +00:00
Jordan K. Hubbard
7c3041774a
Documentation changes reflect the new hardware support and change the
...
appearance version to 2.0.5 (was 2.1). Nice and tidy. :-)
Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-07-11 03:04:20 +00:00
Bruce Evans
5d2fb2731f
Document new config flag for lost output interrupts.
...
Treat the intitial state device less negatively. It is essential for
initializing nonstandard flags such as crtscts.
Delete anachronisms.
1995-06-26 06:05:30 +00:00
Joerg Wunsch
749adad7a6
The joystick driver appeared in FreeBSD 2.0.5, not in 2.1.
...
Closes PR #docs/559
Submitted by: jkh
1995-06-25 13:58:54 +00:00
Rodney W. Grimes
424e4f7c42
Add the link for apm.4 so you can find the man page.
1995-05-22 20:49:25 +00:00
Peter Dufault
a93d103fb4
Change to reflect new header file name.
1995-04-28 12:28:55 +00:00
Peter Dufault
657e73c4f5
Add National Instruments "LabPC" driver
1995-04-28 00:51:40 +00:00
Jordan K. Hubbard
6940898b50
Document matcd1.
...
Be more explanatory about port selection.
Document that new TEAC drives don't work.
Submitted by: Frank Durda IV <uhclem@nemesis.lonestar.org>
1995-04-25 10:23:53 +00:00
Garrett Wollman
c040025a4b
Add `fe' Ethernet driver man page.
1995-04-23 18:54:40 +00:00
Justin T. Gibbs
c4bec2ef93
Install ahc.4.
1995-04-16 00:08:53 +00:00
Justin T. Gibbs
e68becc836
To celibrate the new status of the ahc driver, give it a man page.
...
Add references to the ahc driver to the other adaptec man pages.
Remove the "NOTE" section of the ahb man page that complained about
Adaptec's NDA policy preventing 274x driver development.
1995-04-15 21:48:31 +00:00
Jordan K. Hubbard
dcaaf7cf51
Get the matcd manpage linked into the parent directory like the others.
1995-04-13 20:44:51 +00:00
Jordan K. Hubbard
b81be3d3e8
Add matcd.4 to list of manpages.
1995-04-09 15:55:21 +00:00
Jordan K. Hubbard
83376d5b95
A new man page for the matcd driver.
...
Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-04-09 15:49:46 +00:00
Joerg Wunsch
d95f5d1983
pcvt is proud enough to have a man page. :)
1995-04-08 20:08:42 +00:00
Joerg Wunsch
785b47579d
Upgrade pcvt to 3.20 b24.
1995-04-08 16:04:22 +00:00
Jordan K. Hubbard
d5b3cf8435
options LKM is now the default. No need to reference option that's
...
already turned on (and isn't in LINT).
1995-04-05 01:06:00 +00:00
Andrey A. Chernov
5c95f7a6dc
Add Delete key description
...
Fix Right window/Left window/Menu keys numbers
1995-03-30 00:22:29 +00:00
Jordan K. Hubbard
06b0ad8a6f
/etc/rc.netstart back to /etc/netstart
1995-03-23 06:05:04 +00:00
Jordan K. Hubbard
4642c87ca4
netstart -> rc.netstart
1995-03-23 01:49:15 +00:00
Garrett Wollman
0e5ca0d837
Document net.inet.ip.sourceroute MIB variable.
1995-03-16 18:24:19 +00:00
David Greenman
3c6e6efc95
Added manual page for DEC DEFPA and DEFEA FDDI adapters.
...
Submitted by: Matt Thomas
1995-03-14 09:27:20 +00:00
Peter Dufault
cb282243be
This time add the real man pages for "pt" and "worm".
1995-03-04 20:56:39 +00:00
Peter Dufault
8bcbc1f424
Add processor and worm drivers
1995-03-04 20:54:24 +00:00
Peter Dufault
2460bdf04b
Updated man pages to reflect new configuration options. These man pages
...
are getting pretty out of date and need to be visited some more.
1995-03-01 22:32:38 +00:00
Paul Traina
90e614df0f
Fix a minor grammar bug.
1995-02-28 00:24:47 +00:00
Ugen J.S. Antsilevich
446cbcf7ed
Snoop device stuff
...
* Make snoop see the output in tty ECHO mode
* Allow writing to observed tty (very funny)
* Fix and extend watch util.
* Fix and update manpages
1995-02-27 19:45:57 +00:00
Paul Traina
8340e9ceab
Update to reflect new calling conventions
1995-02-25 20:15:20 +00:00
Ugen J.S. Antsilevich
b71bca73b6
Add commeent to say that this manpage is out of date
...
and will be rewwritten..
1995-02-24 14:33:18 +00:00
Paul Traina
7fec27e124
Correct error in structure definition
1995-02-23 01:27:17 +00:00
Paul Traina
533f4c5076
Clean up man page
1995-02-23 01:25:48 +00:00
Jean-Marc Zucconi
95344a43ed
Put the joystick status in a struct {int x, y, b1, b2;} rather than in a
...
dummy array of 4 integers. Declare the struct in the header file and update
the man page.
1995-02-22 23:34:58 +00:00
Jordan K. Hubbard
dd33263156
Add a man page for the Sony CDROM driver. Other driver authors, you might
...
do a quick check here..
1995-02-22 13:30:39 +00:00
Ugen J.S. Antsilevich
a53227ff18
Move ipfirewall.4 & snp.4 facility manpage
...
to share/man/man4
1995-02-17 18:48:36 +00:00
Garrett Wollman
d69128d862
Document Transaction TCP.
1995-02-15 22:07:28 +00:00
Garrett Wollman
a2cc1fa205
Document TCP MIB variables (tcp.4).
...
Document IP MIB variables (inet.4).
Document Internet-family protocol-specified route cloning (inet.4).
Delete all references to classed addresses (inet.4).
1995-02-15 03:30:54 +00:00
Garrett Wollman
8f283fdc8f
Move apm(4) to i386 section, since it is i386-specific.
1995-02-15 01:20:03 +00:00
Jordan K. Hubbard
6554acd8ba
Add man page for pcvt console driver.
...
Submitted by: hm
1995-02-05 11:16:33 +00:00
Søren Schmidt
a926a37b0a
Third round in syscons update.
...
Display update method changed, now allways write in memory buffer,
then periodically update physical display.
Speed improvements (now > 5 times faster than the old syscons).
History now circular buffer, with changeable size.
History scroll by up/down line, up/down page, home and end.
Backtab proberly implemented.
Now space for 96 function keys, 63 allocated standard, default now
SCO/SYSV compat again as in the old days.
New keyboard definition files ~share/syscons/keymaps/*
Misc fixes for old "hacks" that broke SCO/SYSV compat.
More that I forgot before writing this...
1995-01-28 22:18:05 +00:00
Poul-Henning Kamp
2e442ca3f4
Man page for the new nca driver.
1995-01-27 07:54:59 +00:00
Andrey A. Chernov
e4707252dc
Upgrade Back tab & Keypad 5 info
1995-01-26 11:04:52 +00:00
Andrey A. Chernov
e7a1520824
Describe Left window, Right window and Menu keys
1995-01-26 09:24:14 +00:00
Andrey A. Chernov
4c03cbeb25
Describe Delete key
1995-01-26 08:45:51 +00:00
Jean-Marc Zucconi
01ab76f4b8
Add joystick man page
1995-01-25 21:41:09 +00:00
David Greenman
9be2a2b045
Add links from mem.4 to kmem.4.
1995-01-25 09:43:20 +00:00
David Greenman
db35f309d1
Added more missing manual pages from 1.1.5.
1995-01-25 09:18:56 +00:00
David Greenman
798bb3d232
Install bpf manual page.
1995-01-25 08:47:30 +00:00
David Greenman
60d06671c1
Added bpf(4) manual page from 1.1.5.
1995-01-25 08:46:06 +00:00
Jordan K. Hubbard
c19abbbbd7
Close PR#108 - man page 4 tty lies - needs updated info
...
Submitted by: jgreco@hummin.sol.net
1995-01-14 02:48:13 +00:00
Andrey A. Chernov
985649bb94
Add more funkeys, correct existen ones
1995-01-13 00:51:48 +00:00
Andrey A. Chernov
c58a405f43
Add more termcap capabilities, correct one escape
1995-01-13 00:14:52 +00:00
Søren Schmidt
6378775666
First round in syscons update. Several new features has been added:
...
No kernel config options anymore besides keyboard language layout.
Virtual consoles are now dynamically allocated, no NCONS anymore.
Software cursor blinking/nonblinking.
Visual bell for laptops (don't beep at meetings :-).
Cursor/bell default type setable via config "flags" instead of as defines.
Cursor/bell type setable via ioctl's.
New video modes 80x30 80x60 for some laptops, and those with multisync monitors.
Scroll-lock history (length currently fixed at 100 lines).
Lots of cleanups, some only commented out for now (will goaway soon).
Support for new features in vidcontrol/kbdcontrol.
Updated manpages.
1995-01-12 11:47:05 +00:00
Jordan K. Hubbard
8bc0985035
Latest changes from vak.
...
Submitted by: vak
1995-01-10 11:44:30 +00:00
Jordan K. Hubbard
669fbfeff8
Add seagate driver manpage from Serge Vakulenko (vak@cronyx.ru) .
...
Submitted by: serge
1994-12-31 05:33:56 +00:00
Garrett Wollman
e0e878ae9e
Document EAFNOSUPPORT error return for TCP bind and connect operations.
1994-12-15 20:54:28 +00:00
Andrey A. Chernov
18704338bb
add mcd.4
1994-12-12 04:08:58 +00:00
Andrey A. Chernov
7bc3f9e3f4
Mitsumi manpage
...
Submitted by: Keith E. Walker with small modifications from me
1994-12-12 04:06:17 +00:00
Bruce Evans
300d02be0c
Don't refer to "hardwired" ports.
1994-12-06 20:14:30 +00:00
Andrey A. Chernov
ee3a2d6021
Reflect lastest serial names change
1994-12-05 00:02:38 +00:00
Bruce Evans
9cdd2c1f8c
Add cx.4 to MLINKS.
...
Someone should fix `man' so that man pages in machine-dependent
subdirectories are handled automagically at least for the
current machine.
1994-12-04 08:07:47 +00:00
Garrett Wollman
15d5589942
Add cx(4) to the Makefile.
1994-12-03 00:03:56 +00:00
Garrett Wollman
6014635361
Cronyx/Sigma sync/async serial driver with PPP support
...
from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Nate Williams
6764337197
NetBSD -> FreeBSD
...
(Please bring into 2.0)
1994-11-19 18:13:59 +00:00
Poul-Henning Kamp
19a41dfcbd
The latest user-land changes from the author. I added a big warning to the
...
apm.4 man-page. I also hope the Makefiles make sense now.
Submitted by: HOSOKAWA Tatsumi
1994-11-01 22:46:40 +00:00
Andreas Schulz
7575068e3d
Changed all occurences of GENERICAH/GENERICBT to a simple GENERIC in the
...
man pages.
1994-10-31 09:52:23 +00:00
Bruce Evans
8a3ed3d5c2
Remove my failed attempt to add an Id string.
1994-10-27 13:46:47 +00:00
Bruce Evans
9d48e26c8c
Restore fd.4 to a machine-independent directory.
1994-10-27 13:42:29 +00:00
Jordan K. Hubbard
f135db687c
Change hardwired irqs to soft irqs (?).
...
Add manpage for Buslogic cards, since we didn't have one.
1994-10-27 08:53:11 +00:00
Andrey A. Chernov
a2ecbe0c3a
Add lkm.4
1994-10-19 05:20:01 +00:00
Jordan K. Hubbard
413d993df7
Bring over the lkm manpage.
...
Obtained from: NetBSD
1994-10-18 19:45:26 +00:00
Jordan K. Hubbard
e704d7993c
Reshuffle all the man pages around in the Makefiles too (duh!).
1994-09-30 17:37:23 +00:00
Jordan K. Hubbard
f04dc992ec
Reshuffle all the man pages around in the Makefiles too (duh!).
1994-09-30 17:31:08 +00:00
Jordan K. Hubbard
d3a29150be
Add new files from Wilko (and in their proper place).
...
Submitted by: Wilko Bulte
1994-09-29 13:54:36 +00:00
Jordan K. Hubbard
061c9be80f
New man pages from Wilko Bulte.
...
Reviewed by: jkh
Submitted by: Wilko Bulte
1994-09-18 00:00:36 +00:00
David Greenman
0be4285593
Woops, "8/16 mode" should read "8/16bit mode".
1994-08-23 10:51:40 +00:00
David Greenman
45dab6ecb2
Added manual page for my ethernet driver - if_ed.c, and removed old
...
manual page for the com driver (which is no longer in our source tree).
1994-08-23 09:50:48 +00:00
David Greenman
f4c08ab048
Corrected kernel base address.
1994-08-23 09:34:10 +00:00
Garrett Wollman
c1d06ca15a
Moved YP general explanation manual page to a slightly more appropriate
...
location.
1994-08-08 01:07:26 +00:00
Rodney W. Grimes
c1aa8c2d51
Mark the fact that we have not imported man4.{hp300,sparc,tahoe,vax}.
1994-07-06 02:13:54 +00:00
Jordan K. Hubbard
67e56d3693
Flags 0x80 now means enable the diags, not disable.
1994-06-15 23:28:07 +00:00
Andreas Schulz
e2ca48bacc
Added a manpage for the tw device. Changed the Makefile to install that
...
manpage into the proper place.
1994-06-05 16:21:49 +00:00
Andrey A. Chernov
c855131344
Updated for new sio driver
1994-06-04 00:41:25 +00:00
Andrey A. Chernov
2e9f7a3cb9
Remove obsoleted COM_BIDIR, FIFO_TRIGGER_* and "comcontrol bidir"
...
references
1994-06-01 21:38:46 +00:00
Rodney W. Grimes
afe61c1516
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Geoff Rehmet
3074d43922
Add some clarifications to lpt manpage,
...
remove lpa manpage.
1994-05-22 12:29:21 +00:00
Andrey A. Chernov
dbdb1f56bb
Correct reference to master port:
...
really it is last port on card, not first.
1994-05-07 01:15:10 +00:00
Geoff Rehmet
bc3919a9be
Update lpt(4) man page to reflect recent changes to the lpt device driver.
...
(also point out that lpa is now defunct.)
1994-04-06 20:21:33 +00:00
Andrey A. Chernov
e8c3de7e2f
Some changes from Julian Stacey installed
1994-03-18 13:40:01 +00:00
Andrey A. Chernov
d0251643c1
English corrected.
1994-02-19 15:50:38 +00:00
Andrey A. Chernov
a3ef21fa83
We lost ttyd for dialin, now restore it.
1994-02-19 13:19:33 +00:00
Rodney W. Grimes
8ae98d3e2f
Put the flags field in the right place so that config does not complain
...
about improper syntax.
1994-02-17 17:44:07 +00:00
Andrey A. Chernov
0799d816fb
Previous version restored back after Jordan's damage.
...
I already update this manpage from wilko, moreover,
I fix some his bugs and add some new material.
Jordan, pleeease, do following commands *before* each your commit:
cvs update <file>
cvs rlog <file>
and after update (before commit)
cvs diff -c <file>
It can saves my life time at least...
1994-02-17 11:41:16 +00:00
Jordan K. Hubbard
0783bc487c
Much improved manpage from wilko@idca.tds.philips.nl
1994-02-16 23:17:08 +00:00
Andrey A. Chernov
211439cc2a
Man page update from wilko@idca.tds.philips.nl
1994-02-13 00:16:23 +00:00
Andrey A. Chernov
0f3a91e768
com.4 restored back
1994-02-11 10:55:12 +00:00
Andrey A. Chernov
a756a065cc
Remove nonexistent com driver manpage.
...
Describe some additional features of sio.
1994-02-09 23:49:45 +00:00
Andreas Schulz
d38af35cd4
Fixed a little typo in the spkr.4 man page.
1994-02-06 12:24:59 +00:00
Garrett Wollman
fa93649905
Eliminate references to the ``U word'' and make page conform to Berkeley
...
conventions for formatting. (Print it out on a PostScript printer
to see the difference.)
1994-02-03 07:32:01 +00:00
Nate Williams
8b2e5491db
From: sos@login.dkuug.dk (S|ren Schmidt)
...
Subject: syscons-1.3
Date: Sat, 29 Jan 94 23:33:50 MET
But here is the (hopefully) final syscons-1.3....
....
I've changed sgetc so it works as the pccons parallel
(it now uses a scgetc internally).
[
There were a couple changes that Bruce Evans sent me that were applied
to this version along with some changes that S'ren didn't incorporate
into the final version. There will be only minor changes if anything
from this version to his final release.
]
1994-02-01 06:22:29 +00:00
Andrey A. Chernov
bde1866a63
Added octave-tracking.
...
Added the slur-mark feature.
Name of ioctl's include sys/spkr.h changed to machine/speaker.h
1993-11-09 02:38:17 +00:00
Andrey A. Chernov
840c9e583c
Virtual consoles now ttyvX, not ttyXX (according to MAKEDEV)
1993-11-09 01:49:38 +00:00
Rodney W. Grimes
976608fbb1
Install mse man page, and create link for it
1993-10-19 20:20:33 +00:00
Rodney W. Grimes
4b4d7f421c
Move the mse mouse man page to the man4.i386 directory
1993-10-19 20:19:15 +00:00
Rodney W. Grimes
fa67110305
From: baukno@login.dkuug.dk (S|ren Schmidt)
...
Subject: Patches to syscons/wd
Man pages for keyboard & screen (using syscons)
1993-09-09 00:32:25 +00:00
Rodney W. Grimes
b9a1ef14c0
New manual pages from NetBSD, revised for FreeBSD slightly
1993-08-28 12:41:23 +00:00
Andrew Moore
f48c5293f6
add links to ../
1993-07-23 21:29:57 +00:00
Charlie Root
99f770b8b8
New manual page system
1993-07-02 06:44:07 +00:00
Rodney W. Grimes
9002c02abc
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:49:13 +00:00