- Compile fixes for 9.0, the previous version of this driver was
for FreeBSD 6.
- Add virtual address field in OperationDescriptor_t, we cannot use
MIPS_PHYS_TO_KSEG0 on physical address.
- Fixes for new message ring API
- Remove unused sys/mips/rmi/dev/sec/stats.h
- Whitespace fixes
- Move RMI MIPS extension to atomic increment word (LDADDWU) to common
header file sys/mips/rmi/rmi_mips_exts.h
- Fix xlr_ldaddwu() for 64 bit, it is a 32 bit operation, use
unsigned int* instead of unsigned long* argument
- Provide dummy xlr_enable_kx/xlr_restore_kx for n32 and n64.
- Provide xlr_paddr_ld() instead of xlr_paddr_lw(), so that the
descriptor formats are same for 32 and 64 bit
- update nlge and rge for the changes
These changes are also needed by the security driver which will be
added later.
- Remove sync from msgrng_send, sync needs to be called just once before
sending.
- Fix retry logic - don't reload registers when retrying in message_send,
also fix check for send pending fail.
- remove unused message_send_block_fast()
- merge message_receive_fast() to message_receive
- style(9) fixes, and comments
- rge and nlge updated for the sys/mips/rmi/msgring.h changes
- Provide 64 bit implementations for some macros. On n64 and n32,
don't split 64 bit values.
- No need for 32 bit ops for control registers.
- Fix few bugs (write control reg, write_c0_register64).
- Re-write EIRR/EIMR/CPUID operations using read_c0_registerXX, no
need of inline assembly.
- rename control reg access functions to avoid phnx, update callers.
- stlye/whitespace fixes.
- Updates for the message ring clean up in r212321.
- Instead of dropping Tx packet on credit fail, retry send until it
succeeds.
- Fix freeing mbufs in case of P2P descriptors:
We cannot free the mbuf when the P2P descriptor freeback is received. The
mbuf may be still in use by the GMAC, since the P2P freeback indicates that
it read the P2D descriptors in the P2P message.
Now we free just the P2P descriptor when the P2P freeback message is
received. Another freeback P2D message has been added to the end of
the packet descriptors, the mbuf will be freed only when we received
this.
The P2P descriptor issue was reported by srgorti at netlogicmicro dot com.
Fix message ring send path:
- define msgrng_access_enable() which disables local interrupts
and enables message ring access. Also define msgrng_restore() which
restores interrupts
- remove all other msgrng enable/disable macros, no need of critical_enter
and other locking here.
- message_send() fixup: re-read status until pending bit clears
- message_send_retry() fixup: retry only few times with interrupts disabled
- Fix up message_send/message_send_retry callers - call
msgrng_access_enable() and msgrng_restore() correctly so that interrupts
are not disabled for long.
- removed unused and obsolete code from sys/mips/rmi/msgring.h
- some style fixes - more later
rge.c (XLR GMAC driver):
- updated for the message ring changes
- remove unused message_send_block()
- retry on credit failure, this is not a permanent failure when credits
are configured correctly. Add panic if credits are not available to
send for a long time.
Fix interrupt routing so that the irq returned is correct for XLR and
XLS. This also updates the MSI hack we had earlier - we still don't
really support MSI, but we support some drivers that use MSI, by providing
support for allocating one MSI per pci link - this MSI is directly
mapped to the link IRQ.
- set cache_coherent_dma flag in cpuinfo for XLR, this will make sure that
BUS_DMA_COHERENT flag is handled correctly in busdma_machdep.c
- iodi.c, call device_get_name() just once
- clear RMI specific EIRR while intializing CPUs
- remove debug print in intr_machdep.c
unused files.
- remove clock.c and clock.h, these are not used after the new timer
code was added.
- remove duplicated include files, fix header file ordering, remove
some unneeded includes.
- rename mips/rmi/shared_structs.h which contains the RMI boot loader
interface to mips/rmi/rmi_boot_info.h. Remove unused files
mips/rmi/shared_structs_func.h and sys/mips/rmi/shared_structs_offsets.h
- merge mips/rmi/xlrconfig.h and mips/rmi/rmi_mips_exts.h, and remove
duplicated functions.
- nlge - minor change to remove unneeded argument.
- Add FreeBSD svn keyword for headers
and XAUI 10G interfaces in addition RGMII/SGMII 1G interfaces. This driver
is work in progress.
board.c and board.h expanded to include more info.
Only one of rge and nlge can be enabled at a time, rge will be deprecated
when nlge stabilizes.
Submitted by: Sriram Gorti <srgorti at netlogicmicro com>
SMP.
We used to route all PIC based interrupts to cpu 0, and used the per-CPU
interrupt mask to enable/disable interrupts. But the interrupt threads can
run on any cpu on SMP, and the interrupt thread will re-enable the interrupts
on the CPU it runs on when it is done, and not on cpu0 where the PIC will
still send interrupts to.
The fix is move the disable/enable for PIC based interrupts to PIC, we will
ack on PIC only when the interrupt thread is done, and we do not use the
per-CPU interrupt mask.
The changes also introduce a way for subsystems to add a function that
will be called to clear the interrupt on the subsystem. Currently This is
used by the PCI/PCIe for doing additional work during the interrupt
handling.
- Use timer 7 in XLR PIC as a 32 counter
- provide pic_init_timer(), pic_set_timer(), pic_timer_count32() and
pic_timer_count() PIC timer operations.
- register this timer as platform_timecounter on rmi platform.
- style(9) fixes to mips/rmi platform files
- update pic.h to add pic_setup_intr() and use pic_setup_intr() for setting
up interrupts which are routed thru PIC.
- remove rmi_spin_mutex_safe and haslock, and make sure that the functions
are called only after mutexes are available.
- move PIC code to xlr_machdep.c
- move fast message ring code completely to on_chip.c
- move memory initialization to a new function xlr_mem_init()
- style fixes
booting again.
The code is a copy of the mips/mips/tick.c with minor modifications for
XLR interrupt handling. Disable mips/rmi/clock.c for now, the PIC based
timer code will be added later.
- Adds re-partitioning TLB per core for enabled threads.
- Adds hardware thread id to cpuid mapping
- updates rge driver packet distribution and message ring handling
threads to be started based on hardware thread id.
- remove unused early debugging code to set control registers.
- coding style fixes
Approved by: rrs (mentor)
am now able to run 32 cores ok.. but I still will hang
on buildworld with a NFS problem. I suspect I am missing
a patch for the netlogic rge driver.
JC check and see if I am missing anything except your
core-mask changes
Obtained from: JC
ones implemented using assembly.
o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate
<machine/psl.h> as a result.
o) Use intr_*() rather than *intr(), consistently.
o) Use register_t instead of u_int in some trap code.
o) Merge some more endian-related macros to machine/asm.h from NetBSD.
o) Add PTR_LI macro, which loads an address with the correct sign-extension for
a pointer.
o) Restore interrupts when bailing out due to an excessive IRQ in
nexus_setup_intr().
o) Remove unused functions from psraccess.S.
o) Enter temporary virtual entries for large memory access into the page tables
rather than simply hoping they stay resident in the TLB and we don't need to
do a refill for them.
o) Abstract out large memory mapping setup/teardown using some macros.
o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just
like we do when we can use the direct map.
- remove unused and commented code (MIPS_BUS_SPACE_PCI, pic_usb_ack)
- use rmi_pci_bus_space for USB too (needs byteswap)
- uncomment xls_ehci.c in files.xlr
- changes to xls_ehci.c - updated with dev/usb/controller/ehci_*.c as
Obtained from: JC - c.jayachandran@gmail.com
